diff options
Diffstat (limited to 'dts/src/arm/stm32mp157c-emstamp-argon.dtsi')
-rw-r--r-- | dts/src/arm/stm32mp157c-emstamp-argon.dtsi | 552 |
1 files changed, 0 insertions, 552 deletions
diff --git a/dts/src/arm/stm32mp157c-emstamp-argon.dtsi b/dts/src/arm/stm32mp157c-emstamp-argon.dtsi deleted file mode 100644 index ac53ee3c49..0000000000 --- a/dts/src/arm/stm32mp157c-emstamp-argon.dtsi +++ /dev/null @@ -1,552 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 or MIT) -// -// Copyright (c) 2021 emtrion GmbH -// Author: Reinhold Müller <reinhold.mueller@emtrion.de>. -// - -#include "stm32mp157.dtsi" -#include "stm32mp15xc.dtsi" -#include "stm32mp15-pinctrl.dtsi" -#include "stm32mp15xxac-pinctrl.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/mfd/st,stpmic1.h> - -/ { - aliases { - ethernet0 = ðernet0; - serial0 = &uart4; - serial1 = &usart2; - serial2 = &usart3; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@c0000000 { - device_type = "memory"; - reg = <0xc0000000 0x20000000>; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - mcuram2: mcuram2@10000000 { - compatible = "shared-dma-pool"; - reg = <0x10000000 0x40000>; - no-map; - }; - - vdev0vring0: vdev0vring0@10040000 { - compatible = "shared-dma-pool"; - reg = <0x10040000 0x2000>; - no-map; - }; - - vdev0vring1: vdev0vring1@10042000 { - compatible = "shared-dma-pool"; - reg = <0x10042000 0x2000>; - no-map; - }; - - vdev0buffer: vdev0buffer@10044000 { - compatible = "shared-dma-pool"; - reg = <0x10044000 0x4000>; - no-map; - }; - - mcuram: mcuram@30000000 { - compatible = "shared-dma-pool"; - reg = <0x30000000 0x40000>; - no-map; - }; - - retram: retram@38000000 { - compatible = "shared-dma-pool"; - reg = <0x38000000 0x10000>; - no-map; - }; - - gpu_reserved: gpu@dc000000 { - reg = <0xdc000000 0x4000000>; - no-map; - }; - }; - - led: gpio_leds { - compatible = "gpio-leds"; - led-0 { - label = "panic"; - gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; - default-state = "off"; - panic-indicator; - }; - led-1 { - label = "heartbeat"; - gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; - linux,default-trigger = "heartbeat"; - default-state = "on"; - }; - }; -}; - -&adc { - vdd-supply = <&vdd>; - vdda-supply = <&vdd>; - vref-supply = <&vrefbuf>; - status = "okay"; - - adc1: adc@0 { - pinctrl-names = "default"; - pinctrl-0 = <&adc1_in6_pins_a>; - st,min-sample-time-nsecs = <5000>; - st,adc-channels = <6>; - status = "disabled"; - }; - - adc2: adc@100 { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - channel@12 { - reg = <12>; - label = "sense_temp"; - st,min-sample-time-ns = <9000>; - }; - channel@15 { - reg = <15>; - label = "vbat"; - st,min-sample-time-ns = <9000>; - }; - channel@16 { - reg = <16>; - label = "dac_out1"; - st,min-sample-time-ns = <9000>; - }; - channel@17 { - reg = <17>; - label = "dac_out1"; - st,min-sample-time-ns = <9000>; - }; - }; -}; - -&crc1 { - status = "okay"; -}; - -&cryp1 { - status = "okay"; -}; - -&dac { - pinctrl-names = "default"; - pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>; - vref-supply = <&vdda>; - status = "disabled"; - - dac1: dac@1 { - status = "okay"; - }; - dac2: dac@2 { - status = "okay"; - }; -}; - -&dts { - status = "okay"; -}; - -ðernet0 { - status = "okay"; - snps,reset-gpio = <&gpioa 1 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 30000 50000>; - pinctrl-0 = <ðernet0_rmii_pins_b>; - pinctrl-1 = <ðernet0_rmii_sleep_pins_b>; - pinctrl-names = "default", "sleep"; - phy-mode = "rmii"; - max-speed = <100>; - phy-handle = <&phy0>; - st,eth-ref-clk-sel; - - mdio0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - phy0: ethernet-phy@0 { - reg = <0>; - }; - }; -}; - -&gpu { - contiguous-area = <&gpu_reserved>; -}; - -&hash1 { - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c1_pins_a>; - pinctrl-1 = <&i2c1_sleep_pins_a>; - i2c-scl-rising-time-ns = <100>; - i2c-scl-falling-time-ns = <7>; - status = "disabled"; - /delete-property/dmas; - /delete-property/dma-names; -}; - -&i2c4 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c4_pins_a>; - pinctrl-1 = <&i2c4_sleep_pins_a>; - i2c-scl-rising-time-ns = <185>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - /delete-property/dmas; - /delete-property/dma-names; - - pmic: stpmic@33 { - compatible = "st,stpmic1"; - reg = <0x33>; - interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; - interrupt-controller; - #interrupt-cells = <2>; - status = "okay"; - - regulators { - compatible = "st,stpmic1-regulators"; - - ldo1-supply = <&v3v3>; - ldo3-supply = <&vdd_ddr>; - ldo6-supply = <&v3v3>; - pwr_sw1-supply = <&bst_out>; - pwr_sw2-supply = <&bst_out>; - - vddcore: buck1 { - regulator-name = "vddcore"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - vdd_ddr: buck2 { - regulator-name = "vdd_ddr"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - vdd: buck3 { - regulator-name = "vdd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - st,mask-reset; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - v3v3: buck4 { - regulator-name = "v3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-over-current-protection; - regulator-initial-mode = <0>; - }; - - v1v8_audio: ldo1 { - regulator-name = "v1v8_audio"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - interrupts = <IT_CURLIM_LDO1 0>; - }; - - v3v3_hdmi: ldo2 { - regulator-name = "v3v3_hdmi"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - interrupts = <IT_CURLIM_LDO2 0>; - }; - - vtt_ddr: ldo3 { - regulator-name = "vtt_ddr"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <750000>; - regulator-always-on; - regulator-over-current-protection; - }; - - vdd_usb: ldo4 { - regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - interrupts = <IT_CURLIM_LDO4 0>; - }; - - vdd_sd: ldo5 { - regulator-name = "vdd_sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - interrupts = <IT_CURLIM_LDO5 0>; - regulator-always-on; - }; - - vdda: ldo6 { - regulator-name = "vdda"; - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - regulator-always-on; - interrupts = <IT_CURLIM_LDO6 0>; - regulator-boot-on; - }; - - vref_ddr: vref_ddr { - regulator-name = "vref_ddr"; - regulator-always-on; - regulator-over-current-protection; - }; - - bst_out: boost { - regulator-name = "bst_out"; - interrupts = <IT_OCP_BOOST 0>; - }; - - vbus_otg: pwr_sw1 { - regulator-name = "vbus_otg"; - interrupts = <IT_OCP_OTG 0>; - regulator-active-discharge; - }; - - vbus_usbh: pwr_sw2 { - regulator-name = "usbh_vbus"; - interrupts = <IT_OCP_SWOUT 0>; - regulator-always-on; - regulator-boot-on; - }; - }; - - onkey { - compatible = "st,stpmic1-onkey"; - interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>; - interrupt-names = "onkey-falling", "onkey-rising"; - status = "okay"; - }; - - watchdog { - compatible = "st,stpmic1-wdt"; - status = "disabled"; - }; - }; -}; - -&i2c5 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c5_pins_a>; - pinctrl-1 = <&i2c5_sleep_pins_a>; - i2c-scl-rising-time-ns = <185>; - i2c-scl-falling-time-ns = <20>; - /delete-property/dmas; - /delete-property/dma-names; -}; - -&ipcc { - status = "okay"; -}; - -&iwdg2 { - timeout-sec = <32>; - status = "okay"; -}; - -&m4_rproc { - memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, - <&vdev0vring1>, <&vdev0buffer>; - mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; - mbox-names = "vq0", "vq1", "shutdown"; - interrupt-parent = <&exti>; - interrupts = <68 1>; - interrupt-names = "wdg"; - recovery; - status = "okay"; -}; - -&pwr_regulators { - vdd-supply = <&vdd>; - vdd_3v3_usbfs-supply = <&vdd_usb>; -}; - -&qspi { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>; - pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>; - reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - flash0: flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <133000000>; - spi-rx-bus-width = <1>; - spi-tx-bus-width = <1>; - #address-cells = <1>; - #size-cells = <1>; - }; -}; - -&rng1 { - status = "okay"; -}; - -&rtc { - status = "okay"; -}; - -&sdmmc2 { - arm,primecell-periphid = <0x10153180>; - pinctrl-names = "default", "opendrain", "sleep"; - pinctrl-0 = <&sdmmc2_b4_pins_b>; - pinctrl-1 = <&sdmmc2_b4_od_pins_b>; - pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>; - non-removable; - st,neg-edge; - bus-width = <4>; - vmmc-supply = <&v3v3>; - status = "okay"; -}; - -&spi1 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins_a>; - cs-gpios = <&gpioz 3 0>; - status = "disabled"; - - spidev@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <100000>; - }; -}; - -&timers1 { - /* spare dmas for other usage */ - /delete-property/dmas; - /delete-property/dma-names; - pwm { - pinctrl-0 = <&pwm1_pins_b>; - pinctrl-1 = <&pwm1_sleep_pins_b>; - pinctrl-names = "default", "sleep"; - status = "okay"; - }; - timer@0 { - status = "okay"; - }; -}; - -&timers4 { - /delete-property/dmas; - /delete-property/dma-names; - pwm { - pinctrl-0 = <&pwm4_pins_b>; - pinctrl-1 = <&pwm4_sleep_pins_b>; - pinctrl-names = "default", "sleep"; - status = "okay"; - }; - timer@3 { - status = "okay"; - }; -}; - -&timers5 { - /delete-property/dmas; - /delete-property/dma-names; - pwm { - pinctrl-0 = <&pwm5_pins_a>; - pinctrl-1 = <&pwm5_sleep_pins_a>; - pinctrl-names = "default", "sleep"; - status = "okay"; - }; - timer@4 { - status = "okay"; - }; -}; - -&uart4 { - pinctrl-names = "default", "sleep", "idle"; - pinctrl-0 = <&uart4_pins_a>; - pinctrl-1 = <&uart4_sleep_pins_a>; - pinctrl-2 = <&uart4_idle_pins_a>; - status = "okay"; -}; - -&usart2 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&usart2_pins_a>; - pinctrl-1 = <&usart2_sleep_pins_a>; - status = "okay"; -}; - -&usart3 { - pinctrl-names = "default", "sleep", "idle"; - pinctrl-0 = <&usart3_pins_d>; - pinctrl-1 = <&usart3_sleep_pins_d>; - pinctrl-2 = <&usart3_idle_pins_d>; - status = "okay"; -}; - -&usbh_ehci { - phys = <&usbphyc_port0>; - phy-names = "usb"; - status = "okay"; -}; - -&usbh_ohci { - phys = <&usbphyc_port0>; - phy-names = "usb"; - status = "okay"; -}; - -&usbotg_hs { - dr_mode = "peripheral"; - pinctrl-names = "default"; - pinctrl-0 = <&usbotg_hs_pins_a>; - phy-names = "usb2-phy"; - phys = <&usbphyc_port1 0>; - vbus-supply = <&vbus_otg>; - status = "okay"; -}; - -&usbphyc { - status = "okay"; -}; - -&usbphyc_port0 { - phy-supply = <&vdd_usb>; -}; - -&usbphyc_port1 { - phy-supply = <&vdd_usb>; -}; - -&vrefbuf { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - vdda-supply = <&vdd>; - status = "okay"; -}; - |