summaryrefslogtreecommitdiffstats
path: root/dts/src/arm/stm32mp157c-ev1.dts
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm/stm32mp157c-ev1.dts')
-rw-r--r--dts/src/arm/stm32mp157c-ev1.dts374
1 files changed, 0 insertions, 374 deletions
diff --git a/dts/src/arm/stm32mp157c-ev1.dts b/dts/src/arm/stm32mp157c-ev1.dts
deleted file mode 100644
index 85628e16d2..0000000000
--- a/dts/src/arm/stm32mp157c-ev1.dts
+++ /dev/null
@@ -1,374 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
- * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
- */
-/dts-v1/;
-
-#include "stm32mp157c-ed1.dts"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
- compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- aliases {
- serial0 = &uart4;
- serial1 = &usart3;
- ethernet0 = &ethernet0;
- };
-
- clocks {
- clk_ext_camera: clk-ext-camera {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- };
- };
-
- joystick {
- compatible = "gpio-keys";
- pinctrl-0 = <&joystick_pins>;
- pinctrl-names = "default";
- button-0 {
- label = "JoySel";
- linux,code = <KEY_ENTER>;
- interrupt-parent = <&stmfx_pinctrl>;
- interrupts = <0 IRQ_TYPE_EDGE_RISING>;
- };
- button-1 {
- label = "JoyDown";
- linux,code = <KEY_DOWN>;
- interrupt-parent = <&stmfx_pinctrl>;
- interrupts = <1 IRQ_TYPE_EDGE_RISING>;
- };
- button-2 {
- label = "JoyLeft";
- linux,code = <KEY_LEFT>;
- interrupt-parent = <&stmfx_pinctrl>;
- interrupts = <2 IRQ_TYPE_EDGE_RISING>;
- };
- button-3 {
- label = "JoyRight";
- linux,code = <KEY_RIGHT>;
- interrupt-parent = <&stmfx_pinctrl>;
- interrupts = <3 IRQ_TYPE_EDGE_RISING>;
- };
- button-4 {
- label = "JoyUp";
- linux,code = <KEY_UP>;
- interrupt-parent = <&stmfx_pinctrl>;
- interrupts = <4 IRQ_TYPE_EDGE_RISING>;
- };
- };
-
- panel_backlight: panel-backlight {
- compatible = "gpio-backlight";
- gpios = <&gpiod 13 GPIO_ACTIVE_LOW>;
- default-on;
- status = "okay";
- };
-};
-
-&cec {
- pinctrl-names = "default";
- pinctrl-0 = <&cec_pins_a>;
- status = "okay";
-};
-
-&dcmi {
- status = "okay";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&dcmi_pins_a>;
- pinctrl-1 = <&dcmi_sleep_pins_a>;
-
- port {
- dcmi_0: endpoint {
- remote-endpoint = <&ov5640_0>;
- bus-width = <8>;
- hsync-active = <0>;
- vsync-active = <0>;
- pclk-sample = <1>;
- };
- };
-};
-
-&dsi {
- phy-dsi-supply = <&reg18>;
- status = "okay";
-
- ports {
- port@0 {
- reg = <0>;
- dsi_in: endpoint {
- remote-endpoint = <&ltdc_ep0_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- dsi_out: endpoint {
- remote-endpoint = <&dsi_panel_in>;
- };
- };
- };
-
- panel-dsi@0 {
- compatible = "raydium,rm68200";
- reg = <0>;
- reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>;
- backlight = <&panel_backlight>;
- power-supply = <&v3v3>;
- status = "okay";
-
- port {
- dsi_panel_in: endpoint {
- remote-endpoint = <&dsi_out>;
- };
- };
- };
-};
-
-&ethernet0 {
- status = "okay";
- pinctrl-0 = <&ethernet0_rgmii_pins_a>;
- pinctrl-1 = <&ethernet0_rgmii_sleep_pins_a>;
- pinctrl-names = "default", "sleep";
- phy-mode = "rgmii-id";
- max-speed = <1000>;
- phy-handle = <&phy0>;
-
- mdio0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,dwmac-mdio";
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
- };
-};
-
-&fmc {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&fmc_pins_a>;
- pinctrl-1 = <&fmc_sleep_pins_a>;
- status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- nand@0 {
- reg = <0>;
- nand-on-flash-bbt;
- #address-cells = <1>;
- #size-cells = <1>;
- };
-};
-
-&i2c2 {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c2_pins_a>;
- pinctrl-1 = <&i2c2_sleep_pins_a>;
- i2c-scl-rising-time-ns = <185>;
- i2c-scl-falling-time-ns = <20>;
- status = "okay";
-
- ov5640: camera@3c {
- compatible = "ovti,ov5640";
- reg = <0x3c>;
- clocks = <&clk_ext_camera>;
- clock-names = "xclk";
- DOVDD-supply = <&v2v8>;
- powerdown-gpios = <&stmfx_pinctrl 18 (GPIO_ACTIVE_HIGH | GPIO_PUSH_PULL)>;
- reset-gpios = <&stmfx_pinctrl 19 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
- rotation = <180>;
- status = "okay";
-
- port {
- ov5640_0: endpoint {
- remote-endpoint = <&dcmi_0>;
- bus-width = <8>;
- data-shift = <2>; /* lines 9:2 are used */
- hsync-active = <0>;
- vsync-active = <0>;
- pclk-sample = <1>;
- };
- };
- };
-
- stmfx: stmfx@42 {
- compatible = "st,stmfx-0300";
- reg = <0x42>;
- interrupts = <8 IRQ_TYPE_EDGE_RISING>;
- interrupt-parent = <&gpioi>;
- vdd-supply = <&v3v3>;
-
- stmfx_pinctrl: pinctrl {
- compatible = "st,stmfx-0300-pinctrl";
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-ranges = <&stmfx_pinctrl 0 0 24>;
-
- joystick_pins: joystick-pins {
- pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
- bias-pull-down;
- };
- };
- };
-};
-
-&i2c5 {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c5_pins_a>;
- pinctrl-1 = <&i2c5_sleep_pins_a>;
- i2c-scl-rising-time-ns = <185>;
- i2c-scl-falling-time-ns = <20>;
- status = "okay";
-};
-
-&ltdc {
- status = "okay";
-
- port {
- ltdc_ep0_out: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&dsi_in>;
- };
- };
-};
-
-&m_can1 {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&m_can1_pins_a>;
- pinctrl-1 = <&m_can1_sleep_pins_a>;
- status = "okay";
-};
-
-&qspi {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
- pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>;
- reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- flash0: mx66l51235l@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-rx-bus-width = <4>;
- spi-max-frequency = <108000000>;
- #address-cells = <1>;
- #size-cells = <1>;
- };
-
- flash1: mx66l51235l@1 {
- compatible = "jedec,spi-nor";
- reg = <1>;
- spi-rx-bus-width = <4>;
- spi-max-frequency = <108000000>;
- #address-cells = <1>;
- #size-cells = <1>;
- };
-};
-
-&sdmmc3 {
- pinctrl-names = "default", "opendrain", "sleep";
- pinctrl-0 = <&sdmmc3_b4_pins_a>;
- pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
- pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
- broken-cd;
- st,neg-edge;
- bus-width = <4>;
- vmmc-supply = <&v3v3>;
- status = "disabled";
-};
-
-&spi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi1_pins_a>;
- status = "disabled";
-};
-
-&timers2 {
- /* spare dmas for other usage (un-delete to enable pwm capture) */
- /delete-property/dmas;
- /delete-property/dma-names;
- status = "disabled";
- pwm {
- pinctrl-0 = <&pwm2_pins_a>;
- pinctrl-1 = <&pwm2_sleep_pins_a>;
- pinctrl-names = "default", "sleep";
- status = "okay";
- };
- timer@1 {
- status = "okay";
- };
-};
-
-&timers8 {
- /delete-property/dmas;
- /delete-property/dma-names;
- status = "disabled";
- pwm {
- pinctrl-0 = <&pwm8_pins_a>;
- pinctrl-1 = <&pwm8_sleep_pins_a>;
- pinctrl-names = "default", "sleep";
- status = "okay";
- };
- timer@7 {
- status = "okay";
- };
-};
-
-&timers12 {
- /delete-property/dmas;
- /delete-property/dma-names;
- status = "disabled";
- pwm {
- pinctrl-0 = <&pwm12_pins_a>;
- pinctrl-1 = <&pwm12_sleep_pins_a>;
- pinctrl-names = "default", "sleep";
- status = "okay";
- };
- timer@11 {
- status = "okay";
- };
-};
-
-&usart3 {
- pinctrl-names = "default", "sleep", "idle";
- pinctrl-0 = <&usart3_pins_b>;
- pinctrl-1 = <&usart3_sleep_pins_b>;
- pinctrl-2 = <&usart3_idle_pins_b>;
- /*
- * HW flow control USART3_RTS is optional, and isn't default wired to
- * the connector. SB23 needs to be soldered in order to use it, and R77
- * (ETH_CLK) should be removed.
- */
- uart-has-rtscts;
- status = "disabled";
-};
-
-&usbh_ehci {
- phys = <&usbphyc_port0>;
- status = "okay";
-};
-
-&usbotg_hs {
- pinctrl-0 = <&usbotg_hs_pins_a>;
- pinctrl-names = "default";
- phys = <&usbphyc_port1 0>;
- phy-names = "usb2-phy";
- status = "okay";
-};
-
-&usbphyc {
- status = "okay";
-};