1 files changed, 0 insertions, 80 deletions
diff --git a/dts/src/arm/stm32mp157c-odyssey.dts b/dts/src/arm/stm32mp157c-odyssey.dts
deleted file mode 100644
index be1dd5e9e7..0000000000
--- a/dts/src/arm/stm32mp157c-odyssey.dts
+++ /dev/null
@@ -1,80 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com>.
- */
-
-/dts-v1/;
-
-#include "stm32mp157c-odyssey-som.dtsi"
-
-/ {
-	model = "Seeed Studio Odyssey-STM32MP157C Board";
-	compatible = "seeed,stm32mp157c-odyssey",
-		     "seeed,stm32mp157c-odyssey-som", "st,stm32mp157";
-
-	aliases {
-		ethernet0 = &ethernet0;
-		serial0 = &uart4;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&ethernet0 {
-	status = "okay";
-	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
-	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_a>;
-	pinctrl-names = "default", "sleep";
-	phy-mode = "rgmii-id";
-	max-speed = <1000>;
-	phy-handle = <&phy0>;
-	assigned-clocks = <&rcc ETHCK_K>, <&rcc PLL4_P>;
-	assigned-clock-parents = <&rcc PLL4_P>;
-	assigned-clock-rates = <125000000>; /* Clock PLL4 to 750Mhz in ATF/U-Boot */
-	st,eth-clk-sel;
-
-	mdio0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "snps,dwmac-mdio";
-		phy0: ethernet-phy@7 { /* KSZ9031RN */
-			reg = <7>;
-			reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>; /* ETH_RST# */
-			reset-assert-us = <10000>;
-			reset-deassert-us = <300>;
-		};
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&i2c1_pins_a>;
-	pinctrl-1 = <&i2c1_sleep_pins_a>;
-	i2c-scl-rising-time-ns = <100>;
-	i2c-scl-falling-time-ns = <7>;
-	status = "okay";
-	/delete-property/dmas;
-	/delete-property/dma-names;
-};
-
-&sdmmc1 {
-	pinctrl-names = "default", "opendrain", "sleep";
-	pinctrl-0 = <&sdmmc1_b4_pins_a>;
-	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
-	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
-	cd-gpios = <&gpioi 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
-	disable-wp;
-	st,neg-edge;
-	bus-width = <4>;
-	vmmc-supply = <&v3v3>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins_a>;
-	status = "okay";
-};
-