diff options
Diffstat (limited to 'dts/src/arm/stm32mp157c-odyssey.dts')
| -rw-r--r-- | dts/src/arm/stm32mp157c-odyssey.dts | 80 |
1 files changed, 80 insertions, 0 deletions
diff --git a/dts/src/arm/stm32mp157c-odyssey.dts b/dts/src/arm/stm32mp157c-odyssey.dts new file mode 100644 index 0000000000..a7ffec8f15 --- /dev/null +++ b/dts/src/arm/stm32mp157c-odyssey.dts @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com>. + */ + +/dts-v1/; + +#include "stm32mp157c-odyssey-som.dtsi" + +/ { + model = "Seeed Studio Odyssey-STM32MP157C Board"; + compatible = "seeed,stm32mp157c-odyssey", + "seeed,stm32mp157c-odyssey-som", "st,stm32mp157"; + + aliases { + ethernet0 = ðernet0; + serial0 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_a>; + pinctrl-1 = <ðernet0_rgmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii-id"; + max-speed = <1000>; + phy-handle = <&phy0>; + assigned-clocks = <&rcc ETHCK_K>, <&rcc PLL4_P>; + assigned-clock-parents = <&rcc PLL4_P>; + assigned-clock-rates = <125000000>; /* Clock PLL4 to 750Mhz in ATF/U-Boot */ + st,eth-clk-sel; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@7 { /* KSZ9031RN */ + reg = <7>; + reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>; /* ETH_RST# */ + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_sleep_pins_a>; + i2c-scl-rising-time-ns = <100>; + i2c-scl-falling-time-ns = <7>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; + |