diff options
Diffstat (limited to 'dts/src/arm/stm32mp15xx-dhcom-som.dtsi')
| -rw-r--r-- | dts/src/arm/stm32mp15xx-dhcom-som.dtsi | 17 |
1 files changed, 10 insertions, 7 deletions
diff --git a/dts/src/arm/stm32mp15xx-dhcom-som.dtsi b/dts/src/arm/stm32mp15xx-dhcom-som.dtsi index 272a1a67a9..2af0a67526 100644 --- a/dts/src/arm/stm32mp15xx-dhcom-som.dtsi +++ b/dts/src/arm/stm32mp15xx-dhcom-som.dtsi @@ -123,7 +123,6 @@ max-speed = <100>; phy-handle = <&phy0>; st,eth-ref-clk-sel; - phy-reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>; mdio0 { #address-cells = <1>; @@ -132,6 +131,13 @@ phy0: ethernet-phy@1 { reg = <1>; + /* LAN8710Ai */ + compatible = "ethernet-phy-id0007.c0f0", + "ethernet-phy-ieee802.3-c22"; + clocks = <&rcc ETHCK_K>; + reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>; + reset-assert-us = <500>; + reset-deassert-us = <500>; interrupt-parent = <&gpioi>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; }; @@ -144,7 +150,7 @@ pinctrl-1 = <&fmc_sleep_pins_b>; status = "okay"; - ksz8851: ks8851mll@1,0 { + ksz8851: ethernet@1,0 { compatible = "micrel,ks8851-mll"; reg = <1 0x0 0x2>, <1 0x2 0x20000>; interrupt-parent = <&gpioc>; @@ -327,8 +333,6 @@ vdd_usb: ldo4 { regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; interrupts = <IT_CURLIM_LDO4 0>; }; @@ -350,7 +354,6 @@ vref_ddr: vref_ddr { regulator-name = "vref_ddr"; regulator-always-on; - regulator-over-current-protection; }; bst_out: boost { @@ -366,7 +369,7 @@ vbus_sw: pwr_sw2 { regulator-name = "vbus_sw"; interrupts = <IT_OCP_SWOUT 0>; - regulator-active-discharge; + regulator-active-discharge = <1>; }; }; @@ -431,7 +434,7 @@ #size-cells = <0>; status = "okay"; - flash0: mx66l51235l@0 { + flash0: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-rx-bus-width = <4>; |