diff options
Diffstat (limited to 'dts/src/arm/sun4i-a10-cubieboard.dts')
-rw-r--r-- | dts/src/arm/sun4i-a10-cubieboard.dts | 255 |
1 files changed, 0 insertions, 255 deletions
diff --git a/dts/src/arm/sun4i-a10-cubieboard.dts b/dts/src/arm/sun4i-a10-cubieboard.dts deleted file mode 100644 index 0645d60642..0000000000 --- a/dts/src/arm/sun4i-a10-cubieboard.dts +++ /dev/null @@ -1,255 +0,0 @@ -/* - * Copyright 2012 Stefan Roese - * Stefan Roese <sr@denx.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "Cubietech Cubieboard"; - compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_cubieboard>; - - led-0 { - label = "cubieboard:blue:usr"; - gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* LED1 */ - }; - - led-1 { - label = "cubieboard:green:usr"; - gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* LED2 */ - linux,default-trigger = "heartbeat"; - }; - }; -}; - -&ahci { - target-supply = <®_ahci_5v>; - status = "okay"; -}; - -&codec { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&de { - status = "okay"; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&emac { - phy-handle = <&phy1>; - status = "okay"; -}; - -&emac_sram { - status = "okay"; -}; - -&hdmi { - status = "okay"; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; -}; - -&i2c1 { - status = "okay"; -}; - -&ir0 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins>; - status = "okay"; -}; - -&mdio { - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&pio { - led_pins_cubieboard: led-pins { - pins = "PH20", "PH21"; - function = "gpio_out"; - drive-strength = <20>; - }; -}; - -®_ahci_5v { - status = "okay"; -}; - -#include "axp209.dtsi" - -&ac_power_supply { - status = "okay"; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1450000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-int-dll"; -}; - -®_ldo1 { - regulator-name = "vdd-rtc"; -}; - -®_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -®_usb1_vbus { - status = "okay"; -}; - -®_usb2_vbus { - status = "okay"; -}; - -&spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pi_pins>, - <&spi0_cs0_pi_pin>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; -}; |