diff options
Diffstat (limited to 'dts/src/arm/sun4i-a10-pcduino.dts')
| -rw-r--r-- | dts/src/arm/sun4i-a10-pcduino.dts | 189 |
1 files changed, 97 insertions, 92 deletions
diff --git a/dts/src/arm/sun4i-a10-pcduino.dts b/dts/src/arm/sun4i-a10-pcduino.dts index 9d1e5482cf..4e3e1b9d82 100644 --- a/dts/src/arm/sun4i-a10-pcduino.dts +++ b/dts/src/arm/sun4i-a10-pcduino.dts @@ -17,11 +17,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -58,90 +53,12 @@ model = "LinkSprite pcDuino"; compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10"; - soc@01c00000 { - emac: ethernet@01c0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; - phy = <&phy1>; - status = "okay"; - }; - - pinctrl@01c20800 { - led_pins_pcduino: led_pins@0 { - allwinner,pins = "PH15", "PH16"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - key_pins_pcduino: key_pins@0 { - allwinner,pins = "PH17", "PH18", "PH19"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - - mdio@01c0b080 { - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; + aliases { + serial0 = &uart0; + }; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; + chosen { + stdout-path = "serial0:115200n8"; }; leds { @@ -185,12 +102,100 @@ gpios = <&pio 7 19 GPIO_ACTIVE_LOW>; }; }; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; +}; + +&emac_sram { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&mdio { + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + led_pins_pcduino: led_pins@0 { + allwinner,pins = "PH15", "PH16"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - reg_usb2_vbus: usb2-vbus { - status = "okay"; + key_pins_pcduino: key_pins@0 { + allwinner,pins = "PH17", "PH18", "PH19"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; |