diff options
Diffstat (limited to 'dts/src/arm/sun5i-a10s-olinuxino-micro.dts')
-rw-r--r-- | dts/src/arm/sun5i-a10s-olinuxino-micro.dts | 272 |
1 files changed, 0 insertions, 272 deletions
diff --git a/dts/src/arm/sun5i-a10s-olinuxino-micro.dts b/dts/src/arm/sun5i-a10s-olinuxino-micro.dts deleted file mode 100644 index 5832bb31fc..0000000000 --- a/dts/src/arm/sun5i-a10s-olinuxino-micro.dts +++ /dev/null @@ -1,272 +0,0 @@ -/* - * Copyright 2013 Maxime Ripard - * - * Maxime Ripard <maxime.ripard@free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun5i-a10s.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -/ { - model = "Olimex A10s-Olinuxino Micro"; - compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s"; - - aliases { - serial0 = &uart0; - serial1 = &uart2; - serial2 = &uart3; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_olinuxino>; - - led { - label = "a10s-olinuxino-micro:green:usr"; - gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; -}; - -&be0 { - status = "okay"; -}; - -&ehci0 { - status = "okay"; -}; - -&emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pa_pins>; - phy-handle = <&phy1>; - status = "okay"; -}; - -&emac_sram { - status = "okay"; -}; - -&hdmi { - status = "okay"; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&i2c0 { - status = "okay"; - - axp152: pmic@30 { - reg = <0x30>; - interrupts = <0>; - }; -}; - -#include "axp152.dtsi" - -&i2c1 { - status = "okay"; - - eeprom@50 { - compatible = "atmel,24c16"; - pagesize = <16>; - reg = <0x50>; - read-only; - }; -}; - -&i2c2 { - status = "okay"; -}; - -&lradc { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button-191 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <191274>; - }; - - button-392 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <392644>; - }; - - button-601 { - label = "Menu"; - linux,code = <KEY_MENU>; - channel = <0>; - voltage = <601151>; - }; - - button-795 { - label = "Enter"; - linux,code = <KEY_ENTER>; - channel = <0>; - voltage = <795090>; - }; - - button-987 { - label = "Home"; - linux,code = <KEY_HOMEPAGE>; - channel = <0>; - voltage = <987387>; - }; -}; - -&mdio { - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ - status = "okay"; -}; - -&mmc1 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 13 GPIO_ACTIVE_LOW>; /* PG13 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&pio { - led_pins_olinuxino: led-pin { - pins = "PE3"; - function = "gpio_out"; - drive-strength = <20>; - }; -}; - -®_usb0_vbus { - gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ - status = "okay"; -}; - -®_usb1_vbus { - gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&spi2 { - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pb_pins>, - <&spi2_cs0_pb_pin>; - status = "okay"; -}; - -&tcon0 { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pc_pins>; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pg_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */ - usb0_vbus-supply = <®_usb0_vbus>; - usb1_vbus-supply = <®_usb1_vbus>; - status = "okay"; -}; |