1 files changed, 9 insertions, 29 deletions

diff --git a/dts/src/arm/sun5i-a13-olinuxino.dts b/dts/src/arm/sun5i-a13-olinuxino.dts
index 437ad913a3..9409c232d4 100644
--- a/dts/src/arm/sun5i-a13-olinuxino.dts
+++ b/dts/src/arm/sun5i-a13-olinuxino.dts
@@ -123,8 +123,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -138,14 +136,10 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 };
 
@@ -153,35 +147,35 @@
 	vref-supply = <&reg_vcc3v0>;
 	status = "okay";
 
-	button@191 {
+	button-191 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
 		voltage = <191274>;
 	};
 
-	button@392 {
+	button-392 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
 		voltage = <392644>;
 	};
 
-	button@601 {
+	button-601 {
 		label = "Menu";
 		linux,code = <KEY_MENU>;
 		channel = <0>;
 		voltage = <601151>;
 	};
 
-	button@795 {
+	button-795 {
 		label = "Enter";
 		linux,code = <KEY_ENTER>;
 		channel = <0>;
 		voltage = <795090>;
 	};
 
-	button@987 {
+	button-987 {
 		label = "Home";
 		linux,code = <KEY_HOMEPAGE>;
 		channel = <0>;
@@ -190,8 +184,6 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
@@ -207,34 +199,23 @@
 };
 
 &pio {
-	mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
-		pins = "PG0";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	led_pins_olinuxino: led_pins@0 {
+	led_pins_olinuxino: led-pin {
 		pins = "PG9";
 		function = "gpio_out";
 		drive-strength = <20>;
 	};
 
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+	usb0_id_detect_pin: usb0-id-detect-pin {
 		pins = "PG2";
 		function = "gpio_in";
 		bias-pull-up;
 	};
 
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
 		pins = "PG1";
 		function = "gpio_in";
 		bias-pull-down;
 	};
-
-	usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 {
-		pins = "PG11";
-		function = "gpio_out";
-	};
 };
 
 &reg_usb0_vbus {
@@ -243,7 +224,6 @@
 };
 
 &reg_usb1_vbus {
-	pinctrl-0 = <&usb1_vbus_pin_olinuxino>;
 	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
@@ -263,7 +243,7 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_b>;
+	pinctrl-0 = <&uart1_pg_pins>;
 	status = "okay";
 };