diff options
Diffstat (limited to 'dts/src/arm/sun6i-a31.dtsi')
| -rw-r--r-- | dts/src/arm/sun6i-a31.dtsi | 22 |
1 files changed, 6 insertions, 16 deletions
diff --git a/dts/src/arm/sun6i-a31.dtsi b/dts/src/arm/sun6i-a31.dtsi index 13304b8c51..c04efad81b 100644 --- a/dts/src/arm/sun6i-a31.dtsi +++ b/dts/src/arm/sun6i-a31.dtsi @@ -292,6 +292,7 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon0-pixel-clock"; + #clock-cells = <0>; ports { #address-cells = <1>; @@ -340,6 +341,7 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon1-pixel-clock"; + #clock-cells = <0>; ports { #address-cells = <1>; @@ -491,8 +493,6 @@ }; hdmi_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; @@ -508,6 +508,7 @@ phys = <&usbphy 0>; phy-names = "usb"; extcon = <&usbphy 0>; + dr_mode = "otg"; status = "disabled"; }; @@ -542,7 +543,6 @@ clocks = <&ccu CLK_AHB1_EHCI0>; resets = <&ccu RST_AHB1_EHCI0>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -553,7 +553,6 @@ clocks = <&ccu CLK_AHB1_OHCI0>, <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_AHB1_OHCI0>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -564,7 +563,6 @@ clocks = <&ccu CLK_AHB1_EHCI1>; resets = <&ccu RST_AHB1_EHCI1>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -575,7 +573,6 @@ clocks = <&ccu CLK_AHB1_OHCI1>, <&ccu CLK_USB_OHCI1>; resets = <&ccu RST_AHB1_OHCI1>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -1029,7 +1026,7 @@ }; gic: interrupt-controller@1c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, <0x01c84000 0x2000>, @@ -1229,12 +1226,9 @@ }; be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - be0_out_drc0: endpoint@0 { - reg = <0>; + be0_out_drc0: endpoint { remote-endpoint = <&drc0_in_be0>; }; }; @@ -1259,12 +1253,9 @@ #size-cells = <0>; drc0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - drc0_in_be0: endpoint@0 { - reg = <0>; + drc0_in_be0: endpoint { remote-endpoint = <&be0_out_drc0>; }; }; @@ -1380,7 +1371,6 @@ gpio-controller; interrupt-controller; #interrupt-cells = <3>; - #size-cells = <0>; #gpio-cells = <3>; s_ir_rx_pin: s-ir-rx-pin { |