summaryrefslogtreecommitdiffstats
path: root/dts/src/arm/sun6i-a31.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm/sun6i-a31.dtsi')
-rw-r--r--dts/src/arm/sun6i-a31.dtsi266
1 files changed, 223 insertions, 43 deletions
diff --git a/dts/src/arm/sun6i-a31.dtsi b/dts/src/arm/sun6i-a31.dtsi
index ce1960453a..2b26175d55 100644
--- a/dts/src/arm/sun6i-a31.dtsi
+++ b/dts/src/arm/sun6i-a31.dtsi
@@ -231,6 +231,11 @@
};
};
+ de: display-engine {
+ compatible = "allwinner,sun6i-a31-display-engine";
+ allwinner,pipelines = <&fe0>;
+ };
+
soc@01c00000 {
compatible = "simple-bus";
#address-cells = <1>;
@@ -246,6 +251,44 @@
#dma-cells = <1>;
};
+ tcon0: lcd-controller@01c0c000 {
+ compatible = "allwinner,sun6i-a31-tcon";
+ reg = <0x01c0c000 0x1000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&ccu RST_AHB1_LCD0>;
+ reset-names = "lcd";
+ clocks = <&ccu CLK_AHB1_LCD0>,
+ <&ccu CLK_LCD0_CH0>,
+ <&ccu CLK_LCD0_CH1>;
+ clock-names = "ahb",
+ "tcon-ch0",
+ "tcon-ch1";
+ clock-output-names = "tcon0-pixel-clock";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ tcon0_in_drc0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&drc0_out_tcon0>;
+ };
+ };
+
+ tcon0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+ };
+
mmc0: mmc@01c0f000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c0f000 0x1000>;
@@ -428,19 +471,55 @@
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_APB1_PIO>;
+ clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&osc32k>;
+ clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
#interrupt-cells = <3>;
#gpio-cells = <3>;
- uart0_pins_a: uart0@0 {
- allwinner,pins = "PH20", "PH21";
- allwinner,function = "uart0";
+ gmac_pins_gmii_a: gmac_gmii@0 {
+ allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+ "PA4", "PA5", "PA6", "PA7",
+ "PA8", "PA9", "PA10", "PA11",
+ "PA12", "PA13", "PA14", "PA15",
+ "PA16", "PA17", "PA18", "PA19",
+ "PA20", "PA21", "PA22", "PA23",
+ "PA24", "PA25", "PA26", "PA27";
+ allwinner,function = "gmac";
+ /*
+ * data lines in GMII mode run at 125MHz and
+ * might need a higher signal drive strength
+ */
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ gmac_pins_mii_a: gmac_mii@0 {
+ allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+ "PA8", "PA9", "PA11",
+ "PA12", "PA13", "PA14", "PA19",
+ "PA20", "PA21", "PA22", "PA23",
+ "PA24", "PA26", "PA27";
+ allwinner,function = "gmac";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+ gmac_pins_rgmii_a: gmac_rgmii@0 {
+ allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+ "PA9", "PA10", "PA11",
+ "PA12", "PA13", "PA14", "PA19",
+ "PA20", "PA25", "PA26", "PA27";
+ allwinner,function = "gmac";
+ /*
+ * data lines in RGMII mode use DDR mode
+ * and need a higher signal drive strength
+ */
+ allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
i2c0_pins_a: i2c0@0 {
allwinner,pins = "PH14", "PH15";
allwinner,function = "i2c0";
@@ -462,6 +541,19 @@
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+ lcd0_rgb888_pins: lcd0_rgb888 {
+ allwinner,pins = "PD0", "PD1", "PD2", "PD3",
+ "PD4", "PD5", "PD6", "PD7",
+ "PD8", "PD9", "PD10", "PD11",
+ "PD12", "PD13", "PD14", "PD15",
+ "PD16", "PD17", "PD18", "PD19",
+ "PD20", "PD21", "PD22", "PD23",
+ "PD24", "PD25", "PD26", "PD27";
+ allwinner,function = "lcd0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
mmc0_pins_a: mmc0@0 {
allwinner,pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
@@ -506,47 +598,12 @@
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
- gmac_pins_mii_a: gmac_mii@0 {
- allwinner,pins = "PA0", "PA1", "PA2", "PA3",
- "PA8", "PA9", "PA11",
- "PA12", "PA13", "PA14", "PA19",
- "PA20", "PA21", "PA22", "PA23",
- "PA24", "PA26", "PA27";
- allwinner,function = "gmac";
+ uart0_pins_a: uart0@0 {
+ allwinner,pins = "PH20", "PH21";
+ allwinner,function = "uart0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
-
- gmac_pins_gmii_a: gmac_gmii@0 {
- allwinner,pins = "PA0", "PA1", "PA2", "PA3",
- "PA4", "PA5", "PA6", "PA7",
- "PA8", "PA9", "PA10", "PA11",
- "PA12", "PA13", "PA14", "PA15",
- "PA16", "PA17", "PA18", "PA19",
- "PA20", "PA21", "PA22", "PA23",
- "PA24", "PA25", "PA26", "PA27";
- allwinner,function = "gmac";
- /*
- * data lines in GMII mode run at 125MHz and
- * might need a higher signal drive strength
- */
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- gmac_pins_rgmii_a: gmac_rgmii@0 {
- allwinner,pins = "PA0", "PA1", "PA2", "PA3",
- "PA9", "PA10", "PA11",
- "PA12", "PA13", "PA14", "PA19",
- "PA20", "PA25", "PA26", "PA27";
- allwinner,function = "gmac";
- /*
- * data lines in RGMII mode use DDR mode
- * and need a higher signal drive strength
- */
- allwinner,drive = <SUN4I_PINCTRL_40_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
};
timer@01c20c00 {
@@ -728,6 +785,19 @@
reset-names = "ahb";
};
+ codec: codec@01c22c00 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun6i-a31-codec";
+ reg = <0x01c22c00 0x400>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_APB1_CODEC>, <&ccu CLK_CODEC>;
+ clock-names = "apb", "codec";
+ resets = <&ccu RST_APB1_CODEC>;
+ dmas = <&dma 15>, <&dma 15>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
timer@01c60000 {
compatible = "allwinner,sun6i-a31-hstimer",
"allwinner,sun7i-a20-hstimer";
@@ -799,6 +869,115 @@
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ fe0: display-frontend@01e00000 {
+ compatible = "allwinner,sun6i-a31-display-frontend";
+ reg = <0x01e00000 0x20000>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB1_FE0>, <&ccu CLK_FE0>,
+ <&ccu CLK_DRAM_FE0>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_AHB1_FE0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fe0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ fe0_out_be0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_in_fe0>;
+ };
+ };
+ };
+ };
+
+ be0: display-backend@01e60000 {
+ compatible = "allwinner,sun6i-a31-display-backend";
+ reg = <0x01e60000 0x10000>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_BE0>,
+ <&ccu CLK_DRAM_BE0>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_AHB1_BE0>;
+
+ assigned-clocks = <&ccu CLK_BE0>;
+ assigned-clock-rates = <300000000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ be0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ be0_in_fe0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&fe0_out_be0>;
+ };
+ };
+
+ be0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ be0_out_drc0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&drc0_in_be0>;
+ };
+ };
+ };
+ };
+
+ drc0: drc@01e70000 {
+ compatible = "allwinner,sun6i-a31-drc";
+ reg = <0x01e70000 0x10000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB1_DRC0>, <&ccu CLK_IEP_DRC0>,
+ <&ccu CLK_DRAM_DRC0>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_AHB1_DRC0>;
+
+ assigned-clocks = <&ccu CLK_IEP_DRC0>;
+ assigned-clock-rates = <300000000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ drc0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ drc0_in_be0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_out_drc0>;
+ };
+ };
+
+ drc0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ drc0_out_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_in_drc0>;
+ };
+ };
+ };
+ };
+
rtc: rtc@01f00000 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
@@ -886,7 +1065,8 @@
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 0>;
+ clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>;
+ clock-names = "apb", "hosc", "losc";
resets = <&apb0_rst 0>;
gpio-controller;
interrupt-controller;
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-20 05:53:37 +0000