diff options
Diffstat (limited to 'dts/src/arm/sun7i-a20-bananapi.dts')
-rw-r--r-- | dts/src/arm/sun7i-a20-bananapi.dts | 334 |
1 files changed, 0 insertions, 334 deletions
diff --git a/dts/src/arm/sun7i-a20-bananapi.dts b/dts/src/arm/sun7i-a20-bananapi.dts deleted file mode 100644 index 9d792d7a0f..0000000000 --- a/dts/src/arm/sun7i-a20-bananapi.dts +++ /dev/null @@ -1,334 +0,0 @@ -/* - * Copyright 2014 Hans de Goede <hdegoede@redhat.com> - * - * Hans de Goede <hdegoede@redhat.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun7i-a20.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - model = "LeMaker Banana Pi"; - compatible = "lemaker,bananapi", "allwinner,sun7i-a20"; - - aliases { - serial0 = &uart0; - serial1 = &uart3; - serial2 = &uart7; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - led { - label = "bananapi:green:usr"; - gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; - }; - }; - - reg_gmac_3v3: gmac-3v3 { - compatible = "regulator-fixed"; - regulator-name = "gmac-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <100000>; - enable-active-high; - gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; - }; -}; - -&ahci { - status = "okay"; -}; - -&codec { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; - operating-points = < - /* kHz uV */ - 960000 1400000 - 912000 1400000 - 864000 1350000 - 720000 1250000 - 528000 1150000 - 312000 1100000 - 144000 1050000 - >; -}; - -&de { - status = "okay"; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&gmac { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_rgmii_pins>; - phy-handle = <&phy1>; - phy-mode = "rgmii-id"; - phy-supply = <®_gmac_3v3>; - status = "okay"; -}; - -&hdmi { - status = "okay"; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -&i2c2 { - status = "okay"; -}; - -&ir0 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pin>; - status = "okay"; -}; - -&gmac_mdio { - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&pio { - vcc-pa-supply = <®_vcc3v3>; - vcc-pc-supply = <®_vcc3v3>; - vcc-pe-supply = <®_vcc3v3>; - vcc-pf-supply = <®_vcc3v3>; - vcc-pg-supply = <®_vcc3v3>; - gpio-line-names = - /* PA */ - "ERXD3", "ERXD2", "ERXD1", "ERXD0", "ETXD3", - "ETXD2", "ETXD1", "ETXD0", - "ERXCK", "ERXERR", "ERXDV", "EMDC", "EMDIO", - "ETXEN", "ETXCK", "ECRS", - "ECOL", "ETXERR", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - /* PB */ - "PMU-SCK", "PMU-SDA", "", "", "", "", "", "", - "", "USB0-DRV", "", "", "", "", "", "", - "", "", "", "", "SCL", "SDA", "", "", - "", "", "", "", "", "", "", "", - /* PC */ - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - /* PD */ - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - /* PE */ - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - /* PF */ - "SD0-D1", "SD0-D0", "SD0-CLK", "SD0-CMD", "SD0-D3", - "SD0-D2", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - /* PG */ - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - /* PH */ - "TXD0", "RXD0", "IO-1", "PH3", "USB0-IDDET", "PH5", "", "", - "", "", "SD0-DET", "", "", "", "", "", - "", "", "", "", "IO-4", "IO-5", "", "EMAC-PWR-EN", - "LED1", "", "", "", "", "", "", "", - /* PI */ - "", "", "", "IO-GCLK", "", "", "", "", - "", "", "SPI-CE0", "SPI-CLK", "SPI-MOSI", - "SPI-MISO", "SPI-CE1", "", - "IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "", - "", "", "", "", "", "", "", ""; -}; - -#include "axp209.dtsi" - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-int-dll"; -}; - -®_ldo1 { - regulator-name = "vdd-rtc"; -}; - -®_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -®_usb0_vbus { - status = "okay"; -}; - -®_usb1_vbus { - status = "okay"; -}; - -®_usb2_vbus { - status = "okay"; -}; - -&spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pi_pins>, - <&spi0_cs0_pi_pin>, - <&spi0_cs1_pi_pin>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_ph_pins>; - status = "okay"; -}; - -&uart7 { - pinctrl-names = "default"; - pinctrl-0 = <&uart7_pi_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usb_power_supply { - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ - usb0_vbus_power-supply = <&usb_power_supply>; - usb0_vbus-supply = <®_usb0_vbus>; - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; -}; |