diff options
Diffstat (limited to 'dts/src/arm/sun7i-a20-bananapro.dts')
| -rw-r--r-- | dts/src/arm/sun7i-a20-bananapro.dts | 219 |
1 files changed, 0 insertions, 219 deletions
diff --git a/dts/src/arm/sun7i-a20-bananapro.dts b/dts/src/arm/sun7i-a20-bananapro.dts deleted file mode 100644 index e22f0e8bb1..0000000000 --- a/dts/src/arm/sun7i-a20-bananapro.dts +++ /dev/null @@ -1,219 +0,0 @@ -/* - * Copyright 2015 Hans de Goede <hdegoede@redhat.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun7i-a20.dtsi" -#include "sunxi-common-regulators.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> - -/ { - model = "LeMaker Banana Pro"; - compatible = "lemaker,bananapro", "allwinner,sun7i-a20"; - - aliases { - serial0 = &uart0; - serial1 = &uart4; - serial2 = &uart7; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - leds { - compatible = "gpio-leds"; - - led-0 { - label = "bananapro:blue:usr"; - gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; - }; - - led-1 { - label = "bananapro:green:usr"; - gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; - }; - }; - - wifi_pwrseq: wifi-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; - }; - - reg_gmac_3v3: gmac-3v3 { - compatible = "regulator-fixed"; - regulator-name = "gmac-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <100000>; - enable-active-high; - gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; - }; -}; - -&ahci { - status = "okay"; -}; - -&codec { - status = "okay"; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&gmac { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_rgmii_pins>; - phy-handle = <&phy1>; - phy-mode = "rgmii-id"; - phy-supply = <®_gmac_3v3>; - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - interrupt-controller; - #interrupt-cells = <1>; - }; -}; - -&i2c2 { - status = "okay"; -}; - -&ir0 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pin>; - status = "okay"; -}; - -&gmac_mdio { - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ - status = "okay"; -}; - -&mmc3 { - vmmc-supply = <®_vcc3v3>; - mmc-pwrseq = <&wifi_pwrseq>; - bus-width = <4>; - non-removable; - status = "okay"; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - interrupt-parent = <&pio>; - interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "host-wake"; - }; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -®_usb1_vbus { - gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */ - status = "okay"; -}; - -®_usb2_vbus { - gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - status = "okay"; -}; - -&spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pi_pins>, - <&spi0_cs0_pi_pin>, - <&spi0_cs1_pi_pin>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&uart4_ph_pins>; - status = "okay"; -}; - -&uart7 { - pinctrl-names = "default"; - pinctrl-0 = <&uart7_pi_pins>; - status = "okay"; -}; - -&usbphy { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; -}; |