diff options
Diffstat (limited to 'dts/src/arm/sun8i-a83t-cubietruck-plus.dts')
| -rw-r--r-- | dts/src/arm/sun8i-a83t-cubietruck-plus.dts | 101 |
1 files changed, 101 insertions, 0 deletions
diff --git a/dts/src/arm/sun8i-a83t-cubietruck-plus.dts b/dts/src/arm/sun8i-a83t-cubietruck-plus.dts index cff33454fc..716a205c6d 100644 --- a/dts/src/arm/sun8i-a83t-cubietruck-plus.dts +++ b/dts/src/arm/sun8i-a83t-cubietruck-plus.dts @@ -44,6 +44,7 @@ /dts-v1/; #include "sun8i-a83t.dtsi" +#include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -83,6 +84,17 @@ }; }; + usb-hub { + /* I2C is not connected */ + compatible = "smsc,usb3503"; + initial-mode = <1>; /* initialize in HUB mode */ + disabled-ports = <1>; + intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + reset-gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */ + connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */ + refclk-frequency = <19200000>; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "On-board SPDIF"; @@ -102,6 +114,89 @@ }; }; +&ehci0 { + /* GL830 USB-to-SATA bridge here */ + status = "okay"; +}; + +&ehci1 { + /* USB3503 HSIC USB 2.0 hub here */ + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + cd-inverted; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_emmc_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&r_rsb { + status = "okay"; + + axp81x: pmic@3a3 { + compatible = "x-powers,axp818", "x-powers,axp813"; + reg = <0x3a3>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; + + ac100: codec@e89 { + compatible = "x-powers,ac100"; + reg = <0xe89>; + + ac100_codec: codec { + compatible = "x-powers,ac100-codec"; + interrupt-parent = <&r_pio>; + interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */ + #clock-cells = <0>; + clock-output-names = "4M_adda"; + }; + + ac100_rtc: rtc { + compatible = "x-powers,ac100-rtc"; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + clocks = <&ac100_codec>; + #clock-cells = <1>; + clock-output-names = "cko1_rtc", + "cko2_rtc", + "cko3_rtc"; + }; + }; +}; + +®_usb1_vbus { + gpio = <&pio 3 29 GPIO_ACTIVE_HIGH>; /* PD29 */ + status = "okay"; +}; + +®_usb2_vbus { + gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + status = "okay"; +}; + +®_vcc3v0 { + status = "disabled"; +}; + +®_vcc5v0 { + status = "disabled"; +}; + &spdif { status = "okay"; }; @@ -111,3 +206,9 @@ pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; |