diff options
Diffstat (limited to 'dts/src/arm/sun8i-a83t-tbs-a711.dts')
-rw-r--r-- | dts/src/arm/sun8i-a83t-tbs-a711.dts | 506 |
1 files changed, 0 insertions, 506 deletions
diff --git a/dts/src/arm/sun8i-a83t-tbs-a711.dts b/dts/src/arm/sun8i-a83t-tbs-a711.dts deleted file mode 100644 index 2fd31a0a0b..0000000000 --- a/dts/src/arm/sun8i-a83t-tbs-a711.dts +++ /dev/null @@ -1,506 +0,0 @@ -/* - * Copyright (C) 2017 Touchless Biometric Systems AG - * Tomas Novotny <tomas@novotny.cz> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun8i-a83t.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pwm/pwm.h> -#include <dt-bindings/input/input.h> - -/ { - model = "TBS A711 Tablet"; - compatible = "tbs-biometrics,a711", "allwinner,sun8i-a83t"; - - aliases { - serial0 = &uart0; - serial1 = &uart1; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - enable-gpios = <&pio 3 29 GPIO_ACTIVE_HIGH>; - - brightness-levels = <0 1 2 4 8 16 32 64 128 255>; - default-brightness-level = <9>; - }; - - panel { - compatible = "tbs,a711-panel", "panel-lvds"; - backlight = <&backlight>; - power-supply = <®_sw>; - - width-mm = <153>; - height-mm = <90>; - data-mapping = "vesa-24"; - - panel-timing { - /* 1024x600 @60Hz */ - clock-frequency = <52000000>; - hactive = <1024>; - vactive = <600>; - hsync-len = <20>; - hfront-porch = <180>; - hback-porch = <160>; - vfront-porch = <12>; - vback-porch = <23>; - vsync-len = <5>; - }; - - port { - panel_input: endpoint { - remote-endpoint = <&tcon0_out_lcd>; - }; - }; - }; - - reg_gps: reg-gps { - compatible = "regulator-fixed"; - regulator-name = "gps"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - reg_vbat: reg-vbat { - compatible = "regulator-fixed"; - regulator-name = "vbat"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - }; - - reg_vmain: reg-vmain { - compatible = "regulator-fixed"; - regulator-name = "vmain"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <®_vbat>; - }; - - wifi_pwrseq: wifi_pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */ - - /* - * This is actually Bluetooth's clock, but we have to - * hook it up somewheere - */ - clocks = <&ac100_rtc 1>; - clock-names = "ext_clock"; - }; -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&cpu100 { - cpu-supply = <®_dcdc3>; -}; - -&de { - status = "okay"; -}; - -/* - * An USB-2 hub is connected here, which also means we don't need to - * enable the OHCI controller. - */ -&ehci0 { - status = "okay"; -}; - -/* - * There's a modem connected here that needs to be initialised before - * being able to be enumerated. - */ -&ehci1 { - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - status = "okay"; - - touchscreen@38 { - compatible = "edt,edt-ft5x06"; - reg = <0x38>; - interrupt-parent = <&r_pio>; - interrupts = <0 7 IRQ_TYPE_EDGE_FALLING>; /* PL7 */ - reset-gpios = <&pio 3 5 GPIO_ACTIVE_LOW>; /* PD5 */ - vcc-supply = <®_ldo_io0>; - touchscreen-size-x = <1024>; - touchscreen-size-y = <600>; - }; -}; - -&i2c1 { - clock-frequency = <400000>; - status = "okay"; - - accelerometer@18 { - compatible = "bosch,bma250"; - reg = <0x18>; - interrupt-parent = <&pio>; - interrupts = <7 10 IRQ_TYPE_EDGE_RISING>; /* PH10 / EINT10 */ - }; -}; - -&mmc0 { - vmmc-supply = <®_dcdc1>; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; - bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&mmc1 { - mmc-pwrseq = <&wifi_pwrseq>; - bus-width = <4>; - vmmc-supply = <®_dldo1>; - vqmmc-supply = <®_dldo1>; - non-removable; - wakeup-source; - keep-power-in-suspend; - status = "okay"; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - interrupt-parent = <&r_pio>; - interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 WL_WAKE_UP */ - interrupt-names = "host-wake"; - }; -}; - -&mmc2 { - pinctrl-0 = <&mmc2_8bit_emmc_pins>; - pinctrl-names = "default"; - vmmc-supply = <®_dcdc1>; - vqmmc-supply = <®_dcdc1>; - bus-width = <8>; - non-removable; - cap-mmc-hw-reset; - status = "okay"; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm_pin>; - status = "okay"; -}; - -&r_lradc { - vref-supply = <®_aldo2>; - status = "okay"; - - button-210 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <210000>; - }; - - button-410 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <410000>; - }; -}; - -&r_rsb { - status = "okay"; - - axp81x: pmic@3a3 { - compatible = "x-powers,axp813"; - reg = <0x3a3>; - interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - swin-supply = <®_dcdc1>; - x-powers,drive-vbus-en; - }; - - ac100: codec@e89 { - compatible = "x-powers,ac100"; - reg = <0xe89>; - - ac100_codec: codec { - compatible = "x-powers,ac100-codec"; - interrupt-parent = <&r_pio>; - interrupts = <0 12 IRQ_TYPE_LEVEL_LOW>; /* PL12 */ - #clock-cells = <0>; - clock-output-names = "4M_adda"; - }; - - ac100_rtc: rtc { - compatible = "x-powers,ac100-rtc"; - interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - clocks = <&ac100_codec>; - #clock-cells = <1>; - clock-output-names = "cko1_rtc", - "cko2_rtc", - "cko3_rtc"; - }; - }; - -}; - -#include "axp81x.dtsi" - -&battery_power_supply { - status = "okay"; -}; - -®_aldo1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc-1.8"; -}; - -®_aldo2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-name = "vdd-drampll"; -}; - -®_aldo3 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-name = "avcc"; -}; - -®_dcdc1 { - regulator-min-microvolt = <3100000>; - regulator-max-microvolt = <3100000>; - regulator-always-on; - regulator-name = "vcc-io"; -}; - -®_dcdc2 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-name = "vdd-cpu-A"; -}; - -®_dcdc3 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-name = "vdd-cpu-B"; -}; - -®_dcdc4 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1100000>; - regulator-name = "vdd-gpu"; -}; - -®_dcdc5 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-name = "vcc-dram"; -}; - -®_dcdc6 { - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-always-on; - regulator-name = "vdd-sys"; -}; - -®_dldo1 { - regulator-min-microvolt = <3100000>; - regulator-max-microvolt = <3100000>; - regulator-name = "vcc-wifi-io"; -}; - -®_dldo2 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <4200000>; - regulator-name = "vcc-mipi"; -}; - -®_dldo3 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-name = "vdd-csi"; -}; - -®_dldo4 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-name = "avdd-csi"; -}; - -®_drivevbus { - regulator-name = "usb0-vbus"; - status = "okay"; -}; - -®_eldo1 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1800000>; - regulator-name = "dvdd-csi-r"; -}; - -®_eldo2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc-dsi"; -}; - -®_eldo3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1800000>; - regulator-name = "dvdd-csi-f"; -}; - -®_fldo1 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-name = "vcc-hsic"; -}; - -®_fldo2 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-name = "vdd-cpus"; -}; - -®_ldo_io0 { - regulator-min-microvolt = <3100000>; - regulator-max-microvolt = <3100000>; - regulator-name = "vcc-ctp"; - status = "okay"; -}; - -®_ldo_io1 { - regulator-min-microvolt = <3100000>; - regulator-max-microvolt = <3100000>; - regulator-name = "vcc-vb"; - status = "okay"; -}; - -®_sw { - regulator-min-microvolt = <3100000>; - regulator-max-microvolt = <3100000>; - regulator-name = "vcc-lcd"; -}; - -&tcon0 { - pinctrl-names = "default"; - pinctrl-0 = <&lcd_lvds_pins>; -}; - -&tcon0_out { - tcon0_out_lcd: endpoint { - remote-endpoint = <&panel_input>; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -/* There's the BT part of the AP6210 connected to that UART */ -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; - uart-has-rtscts; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm20702a1"; - clocks = <&ac100_rtc 1>; - clock-names = "lpo"; - vbat-supply = <®_vbat>; - vddio-supply = <®_dldo1>; - device-wakeup-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ - host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ - shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ - max-speed = <1500000>; - }; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pb_pins>; - status = "okay"; - - gnss { - compatible = "u-blox,neo-6m"; - - v-bckp-supply = <®_rtc_ldo>; - vcc-supply = <®_gps>; - current-speed = <9600>; - }; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ - usb0_vbus-supply = <®_drivevbus>; - usb1_vbus-supply = <®_vmain>; - usb2_vbus-supply = <®_vmain>; - status = "okay"; -}; |