summaryrefslogtreecommitdiffstats
path: root/dts/src/arm/sun8i-h2-plus-bananapi-m2-zero.dts
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm/sun8i-h2-plus-bananapi-m2-zero.dts')
-rw-r--r--dts/src/arm/sun8i-h2-plus-bananapi-m2-zero.dts273
1 files changed, 0 insertions, 273 deletions
diff --git a/dts/src/arm/sun8i-h2-plus-bananapi-m2-zero.dts b/dts/src/arm/sun8i-h2-plus-bananapi-m2-zero.dts
deleted file mode 100644
index d5c7b7984d..0000000000
--- a/dts/src/arm/sun8i-h2-plus-bananapi-m2-zero.dts
+++ /dev/null
@@ -1,273 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
- *
- * Based on sun8i-h3-bananapi-m2-plus.dts, which is:
- * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
- */
-
-/dts-v1/;
-#include "sun8i-h3.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Banana Pi BPI-M2-Zero";
- compatible = "sinovoip,bpi-m2-zero", "allwinner,sun8i-h2-plus";
-
- aliases {
- serial0 = &uart0;
- serial1 = &uart1;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- connector {
- compatible = "hdmi-connector";
- type = "c";
-
- port {
- hdmi_con_in: endpoint {
- remote-endpoint = <&hdmi_out_con>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- pwr_led {
- label = "bananapi-m2-zero:red:pwr";
- gpios = <&r_pio 0 10 GPIO_ACTIVE_LOW>; /* PL10 */
- default-state = "on";
- };
- };
-
- gpio_keys {
- compatible = "gpio-keys";
-
- sw4 {
- label = "power";
- linux,code = <KEY_POWER>;
- gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
- wakeup-source;
- };
- };
-
- reg_vdd_cpux: vdd-cpux-regulator {
- compatible = "regulator-gpio";
- regulator-name = "vdd-cpux";
- regulator-type = "voltage";
- regulator-boot-on;
- regulator-always-on;
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1300000>;
- regulator-ramp-delay = <50>; /* 4ms */
-
- gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
- enable-active-high;
- gpios-states = <0x1>;
- states = <1100000 0>, <1300000 1>;
- };
-
- reg_vcc_dram: vcc-dram {
- compatible = "regulator-fixed";
- regulator-name = "vcc-dram";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- enable-active-high;
- gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
- vin-supply = <&reg_vcc5v0>;
- };
-
- reg_vcc1v2: vcc1v2 {
- compatible = "regulator-fixed";
- regulator-name = "vcc1v2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- enable-active-high;
- gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
- vin-supply = <&reg_vcc5v0>;
- };
-
- poweroff {
- compatible = "regulator-poweroff";
- cpu-supply = <&reg_vcc1v2>;
- };
-
- wifi_pwrseq: wifi_pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
- clocks = <&rtc 1>;
- clock-names = "ext_clock";
- };
-};
-
-&cpu0 {
- cpu-supply = <&reg_vdd_cpux>;
-};
-
-&de {
- status = "okay";
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&hdmi {
- status = "okay";
-};
-
-&hdmi_out {
- hdmi_out_con: endpoint {
- remote-endpoint = <&hdmi_con_in>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <&reg_vcc3v3>;
- bus-width = <4>;
- /*
- * On the production batch of this board the card detect GPIO is
- * high active (card inserted), although on the early samples it's
- * low active.
- */
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
- status = "okay";
-};
-
-&mmc1 {
- vmmc-supply = <&reg_vcc3v3>;
- vqmmc-supply = <&reg_vcc3v3>;
- mmc-pwrseq = <&wifi_pwrseq>;
- bus-width = <4>;
- non-removable;
- status = "okay";
-
- brcmf: wifi@1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
- interrupt-parent = <&pio>;
- interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
- interrupt-names = "host-wake";
- };
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pa_pins>;
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
- uart-has-rtscts;
- status = "okay";
-
- bluetooth {
- compatible = "brcm,bcm43438-bt";
- max-speed = <1500000>;
- clocks = <&rtc 1>;
- clock-names = "lpo";
- vbat-supply = <&reg_vcc3v3>;
- vddio-supply = <&reg_vcc3v3>;
- device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
- host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
- shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
- };
-
-};
-
-&pio {
- gpio-line-names =
- /* PA */
- "CON2-P13", "CON2-P11", "CON2-P22", "CON2-P15",
- "CON3-P03", "CON3-P02", "CON2-P07", "CON2-P29",
- "CON2-P31", "CON2-P33", "CON2-P35", "CON2-P05",
- "CON2-P03", "CON2-P08", "CON2-P10", "CON2-P16",
- "CON2-P12", "CON2-P37", "CON2-P28", "CON2-P27",
- "CON2-P40", "CON2-P38", "", "",
- "", "", "", "", "", "", "", "",
-
- /* PB */
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
-
- /* PC */
- "CON2-P19", "CON2-P21", "CON2-P23", "CON2-P24",
- "CON2-P18", "", "", "CON2-P26",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
-
- /* PD */
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "CSI-PWR-EN", "",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
-
- /* PE */
- "CN3-P17", "CN3-P13", "CN3-P09", "CN3-P07",
- "CN3-P19", "CN3-P21", "CN3-P22", "CN3-P20",
- "CN3-P18", "CN3-P16", "CN3-P14", "CN3-P12",
- "CN3-P05", "CN3-P03", "CN3-P06", "CN3-P08",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
-
- /* PF */
- "SDC0-D1", "SDC0-D0", "SDC0-CLK", "SDC0-CMD", "SDC0-D3",
- "SDC0-D2", "SDC0-DET", "",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
-
- /* PG */
- "WL-SDIO-CLK", "WL-SDIO-CMD", "WL-SDIO-D0", "WL-SDIO-D1",
- "WL-SDIO-D2", "WL-SDIO-D3", "BT-UART-TX", "BT-UART-RX",
- "BT-UART-RTS", "BT-UART-CTS", "WL-WAKE-AP", "BT-WAKE-AP",
- "BT-RST-N", "AP-WAKE-BT", "", "",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "";
-};
-
-&r_pio {
- gpio-line-names =
- /* PL */
- "", "CPUX-SET", "CON2-P32", "POWER-KEY", "CON2-P36",
- "VCC-IO-EN", "USB0-ID", "WL-PWR-EN",
- "PWR-STB", "PWR-DRAM", "PWR-LED", "IR-RX", "", "", "", "",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
- /*
- * There're two micro-USB connectors, one is power-only and another is
- * OTG. The Vbus of these two connectors are connected together, so
- * the external USB device will be powered just by the power input
- * from the power-only USB port.
- */
- status = "okay";
-};