diff options
Diffstat (limited to 'dts/src/arm/sun8i-h2-plus-orangepi-zero.dts')
| -rw-r--r-- | dts/src/arm/sun8i-h2-plus-orangepi-zero.dts | 209 |
1 files changed, 0 insertions, 209 deletions
diff --git a/dts/src/arm/sun8i-h2-plus-orangepi-zero.dts b/dts/src/arm/sun8i-h2-plus-orangepi-zero.dts deleted file mode 100644 index f19ed981da..0000000000 --- a/dts/src/arm/sun8i-h2-plus-orangepi-zero.dts +++ /dev/null @@ -1,209 +0,0 @@ -/* - * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz> - * - * Based on sun8i-h3-orangepi-one.dts, which is: - * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun8i-h3.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -/ { - model = "Xunlong Orange Pi Zero"; - compatible = "xunlong,orangepi-zero", "allwinner,sun8i-h2-plus"; - - aliases { - serial0 = &uart0; - /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ - ethernet0 = &emac; - ethernet1 = &xr819; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - leds { - compatible = "gpio-leds"; - - pwr_led { - label = "orangepi:green:pwr"; - gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - status_led { - label = "orangepi:red:status"; - gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; - }; - }; - - reg_vcc_wifi: reg_vcc_wifi { - compatible = "regulator-fixed"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; - enable-active-high; - gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>; - }; - - reg_vdd_cpux: vdd-cpux-regulator { - compatible = "regulator-gpio"; - regulator-name = "vdd-cpux"; - regulator-type = "voltage"; - regulator-boot-on; - regulator-always-on; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1300000>; - regulator-ramp-delay = <50>; /* 4ms */ - - gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ - enable-active-high; - gpios-states = <1>; - states = <1100000 0>, <1300000 1>; - }; - - wifi_pwrseq: wifi_pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; - post-power-on-delay-ms = <200>; - }; -}; - -&cpu0 { - cpu-supply = <®_vdd_cpux>; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&emac { - phy-handle = <&int_mii_phy>; - phy-mode = "mii"; - allwinner,leds-active-low; - status = "okay"; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ - status = "okay"; -}; - -&mmc1 { - vmmc-supply = <®_vcc_wifi>; - mmc-pwrseq = <&wifi_pwrseq>; - bus-width = <4>; - non-removable; - status = "okay"; - - /* - * Explicitly define the sdio device, so that we can add an ethernet - * alias for it (which e.g. makes u-boot set a mac-address). - */ - xr819: sdio_wifi@1 { - reg = <1>; - }; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&spi0 { - /* Disable SPI NOR by default: it optional on Orange Pi Zero boards */ - status = "disabled"; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mxicy,mx25l1606e", "winbond,w25q128"; - reg = <0>; - spi-max-frequency = <40000000>; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pa_pins>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; - status = "disabled"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; - status = "disabled"; -}; - -&usb_otg { - dr_mode = "peripheral"; - status = "okay"; -}; - -&usbphy { - /* - * USB Type-A port VBUS is always on. However, MicroUSB VBUS can only - * power up the board; when it's used as OTG port, this VBUS is - * always off even if the board is powered via GPIO pins. - */ - status = "okay"; - usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ -}; |