diff options
Diffstat (limited to 'dts/src/arm/sun8i-h3-beelink-x2.dts')
-rw-r--r-- | dts/src/arm/sun8i-h3-beelink-x2.dts | 238 |
1 files changed, 0 insertions, 238 deletions
diff --git a/dts/src/arm/sun8i-h3-beelink-x2.dts b/dts/src/arm/sun8i-h3-beelink-x2.dts deleted file mode 100644 index a6d38ecee1..0000000000 --- a/dts/src/arm/sun8i-h3-beelink-x2.dts +++ /dev/null @@ -1,238 +0,0 @@ -/* - * Copyright (C) 2017 Marcus Cooper <codekipper@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun8i-h3.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -/ { - model = "Beelink X2"; - compatible = "roofull,beelink-x2", "allwinner,sun8i-h3"; - - aliases { - serial0 = &uart0; - ethernet0 = &emac; - ethernet1 = &sdiowifi; - }; - - cec { - compatible = "cec-gpio"; - cec-gpios = <&pio 0 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PA14 */ - hdmi-phandle = <&hdmi>; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-0 { - label = "beelink-x2:blue:pwr"; - gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ - default-state = "on"; - }; - - led-1 { - label = "beelink-x2:red:standby"; - gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - key-power { - label = "power"; - linux,code = <KEY_POWER>; - gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; - wakeup-source; - }; - }; - - sound_spdif { - compatible = "simple-audio-card"; - simple-audio-card,name = "On-board SPDIF"; - - simple-audio-card,cpu { - sound-dai = <&spdif>; - }; - - simple-audio-card,codec { - sound-dai = <&spdif_out>; - }; - }; - - spdif_out: spdif-out { - #sound-dai-cells = <0>; - compatible = "linux,spdif-dit"; - }; - - wifi_pwrseq: wifi_pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ - clocks = <&rtc CLK_OSC32K_FANOUT>; - clock-names = "ext_clock"; - }; -}; - -&de { - status = "okay"; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&emac { - phy-handle = <&int_mii_phy>; - phy-mode = "mii"; - allwinner,leds-active-low; - status = "okay"; -}; - -&hdmi { - status = "okay"; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&ir { - linux,rc-map-name = "rc-tanix-tx3mini"; - pinctrl-names = "default"; - pinctrl-0 = <&r_ir_rx_pin>; - status = "okay"; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ - status = "okay"; -}; - -&mmc1 { - vmmc-supply = <®_vcc3v3>; - vqmmc-supply = <®_vcc3v3>; - mmc-pwrseq = <&wifi_pwrseq>; - bus-width = <4>; - non-removable; - status = "okay"; - - /* - * Explicitly define the sdio device, so that we can add an ethernet - * alias for it (which e.g. makes u-boot set a mac-address). - */ - sdiowifi: sdio_wifi@1 { - reg = <1>; - }; -}; - -&mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_8bit_pins>; - vmmc-supply = <®_vcc3v3>; - bus-width = <8>; - non-removable; - cap-mmc-hw-reset; - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -®_usb0_vbus { - gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ - status = "okay"; -}; - -&spdif { - pinctrl-names = "default"; - pinctrl-0 = <&spdif_tx_pin>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pa_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - /* USB VBUS is always on except for the OTG port */ - status = "okay"; - usb0_id_det-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA07 */ - usb0_vbus-supply = <®_usb0_vbus>; -}; |