diff options
Diffstat (limited to 'dts/src/arm/sun8i-h3-orangepi-pc.dts')
-rw-r--r-- | dts/src/arm/sun8i-h3-orangepi-pc.dts | 241 |
1 files changed, 0 insertions, 241 deletions
diff --git a/dts/src/arm/sun8i-h3-orangepi-pc.dts b/dts/src/arm/sun8i-h3-orangepi-pc.dts deleted file mode 100644 index 5aff8ecc66..0000000000 --- a/dts/src/arm/sun8i-h3-orangepi-pc.dts +++ /dev/null @@ -1,241 +0,0 @@ -/* - * Copyright (C) 2015 Chen-Yu Tsai <wens@csie.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun8i-h3.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -/ { - model = "Xunlong Orange Pi PC"; - compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3"; - - aliases { - ethernet0 = &emac; - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - pwr_led { - label = "orangepi:green:pwr"; - gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - status_led { - label = "orangepi:red:status"; - gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; - }; - }; - - r_gpio_keys { - compatible = "gpio-keys"; - - sw4 { - label = "sw4"; - linux,code = <BTN_0>; - gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&codec { - allwinner,audio-routing = - "Line Out", "LINEOUT", - "MIC1", "Mic", - "Mic", "MBIAS"; - status = "okay"; -}; - -&de { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <®_vdd_cpux>; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&ehci2 { - status = "okay"; -}; - -&ehci3 { - status = "okay"; -}; - -&emac { - phy-handle = <&int_mii_phy>; - phy-mode = "mii"; - allwinner,leds-active-low; - status = "okay"; -}; - -&hdmi { - status = "okay"; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&ir { - pinctrl-names = "default"; - pinctrl-0 = <&r_ir_rx_pin>; - status = "okay"; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&ohci2 { - status = "okay"; -}; - -&ohci3 { - status = "okay"; -}; - -&r_i2c { - status = "okay"; - - reg_vdd_cpux: regulator@65 { - compatible = "silergy,sy8106a"; - reg = <0x65>; - regulator-name = "vdd-cpux"; - silergy,fixed-microvolt = <1200000>; - /* - * The datasheet uses 1.1V as the minimum value of VDD-CPUX, - * however both the Armbian DVFS table and the official one - * have operating points with voltage under 1.1V, and both - * DVFS table are known to work properly at the lowest - * operating point. - * - * Use 1.0V as the minimum voltage instead. - */ - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1300000>; - regulator-boot-on; - regulator-always-on; - }; -}; - -®_usb0_vbus { - gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pa_pins>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; - status = "disabled"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; - status = "disabled"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins>; - status = "disabled"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ - usb0_vbus-supply = <®_usb0_vbus>; - /* VBUS on USB host ports are always on */ - status = "okay"; -}; |