diff options
Diffstat (limited to 'dts/src/arm/sun8i-r16-bananapi-m2m.dts')
| -rw-r--r-- | dts/src/arm/sun8i-r16-bananapi-m2m.dts | 311 |
1 files changed, 0 insertions, 311 deletions
diff --git a/dts/src/arm/sun8i-r16-bananapi-m2m.dts b/dts/src/arm/sun8i-r16-bananapi-m2m.dts deleted file mode 100644 index bf5b5e2f61..0000000000 --- a/dts/src/arm/sun8i-r16-bananapi-m2m.dts +++ /dev/null @@ -1,311 +0,0 @@ -/* - * Copyright (c) 2017 Free Electrons <maxime.ripard@free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun8i-a33.dtsi" - -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "BananaPi M2 Magic"; - compatible = "sinovoip,bananapi-m2m", "allwinner,sun8i-a33"; - - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - serial0 = &uart0; - serial1 = &uart1; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - leds { - compatible = "gpio-leds"; - - led-0 { - label = "bpi-m2m:blue:usr"; - gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; - }; - - led-1 { - label = "bpi-m2m:green:usr"; - gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; - }; - - led-2 { - label = "bpi-m2m:red:power"; - gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - }; - - reg_vcc5v0: vcc5v0 { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - wifi_pwrseq: wifi_pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */ - clocks = <&rtc 1>; - clock-names = "ext_clock"; - }; -}; - -&codec { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <®_dcdc3>; -}; - -&cpu0_opp_table { - opp-1104000000 { - opp-hz = /bits/ 64 <1104000000>; - opp-microvolt = <1320000>; - clock-latency-ns = <244144>; /* 8 32k periods */ - }; - - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1320000>; - clock-latency-ns = <244144>; /* 8 32k periods */ - }; -}; - -&dai { - status = "okay"; -}; - -&ehci0 { - status = "okay"; -}; - -&mmc0 { - vmmc-supply = <®_dcdc1>; - bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */ - status = "okay"; -}; - -&mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pg_pins>; - vmmc-supply = <®_aldo1>; - mmc-pwrseq = <&wifi_pwrseq>; - bus-width = <4>; - non-removable; - status = "okay"; -}; - -&mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_8bit_pins>; - vmmc-supply = <®_dcdc1>; - bus-width = <8>; - non-removable; - cap-mmc-hw-reset; - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&r_rsb { - status = "okay"; - - axp22x: pmic@3a3 { - compatible = "x-powers,axp223"; - reg = <0x3a3>; - interrupt-parent = <&r_intc>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; - eldoin-supply = <®_dcdc1>; - x-powers,drive-vbus-en; - }; -}; - -#include "axp223.dtsi" - -&ac_power_supply { - status = "okay"; -}; - -®_aldo1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-io"; -}; - -®_aldo2 { - regulator-always-on; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-name = "vdd-dll"; -}; - -®_aldo3 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -®_dc1sw { - regulator-name = "vcc-lcd"; -}; - -®_dc5ldo { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpus"; -}; - -®_dcdc1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v0"; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-sys"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc5 { - regulator-always-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vcc-dram"; -}; - -/* - * Our WiFi chip needs both DLDO1 and DLDO2 to be powered at the same - * time, with the two being in sync. Since this is not really - * supported right now, just use the two as always on, and we will fix - * it later. - */ -®_dldo1 { - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi0"; -}; - -®_dldo2 { - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi1"; -}; - -®_drivevbus { - regulator-name = "usb0-vbus"; - status = "okay"; -}; - -®_rtc_ldo { - regulator-name = "vcc-rtc"; -}; - -&sound { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pg_pins>; - uart-has-rtscts; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - clocks = <&rtc 1>; - clock-names = "lpo"; - vbat-supply = <®_dldo1>; - vddio-supply = <®_aldo3>; - device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ - host-wakeup-gpios = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ - shutdown-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ - }; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usb_power_supply { - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */ - usb0_vbus_power-supply = <&usb_power_supply>; - usb0_vbus-supply = <®_drivevbus>; - usb1_vbus-supply = <®_vcc5v0>; - status = "okay"; -}; |