diff options
Diffstat (limited to 'dts/src/arm/sun8i-v40-bananapi-m2-berry.dts')
-rw-r--r-- | dts/src/arm/sun8i-v40-bananapi-m2-berry.dts | 305 |
1 files changed, 0 insertions, 305 deletions
diff --git a/dts/src/arm/sun8i-v40-bananapi-m2-berry.dts b/dts/src/arm/sun8i-v40-bananapi-m2-berry.dts deleted file mode 100644 index 47954551f5..0000000000 --- a/dts/src/arm/sun8i-v40-bananapi-m2-berry.dts +++ /dev/null @@ -1,305 +0,0 @@ -/* - * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun8i-r40.dtsi" - -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "Banana Pi M2 Berry"; - compatible = "sinovoip,bpi-m2-berry", "allwinner,sun8i-r40"; - - aliases { - ethernet0 = &gmac; - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - pwr-led { - label = "bananapi:red:pwr"; - gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - user-led { - label = "bananapi:green:user"; - gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; - }; - }; - - reg_vcc5v0: vcc5v0 { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */ - enable-active-high; - }; - - wifi_pwrseq: wifi_pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */ - clocks = <&ccu CLK_OUTA>; - clock-names = "ext_clock"; - }; -}; - -&ahci { - ahci-supply = <®_dldo4>; - phy-supply = <®_eldo3>; - status = "okay"; -}; - -&de { - status = "okay"; -}; - -&ehci1 { - /* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */ - status = "okay"; -}; - -&gmac { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_rgmii_pins>; - phy-handle = <&phy1>; - phy-mode = "rgmii-id"; - phy-supply = <®_dc1sw>; - status = "okay"; -}; - -&gmac_mdio { - phy1: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - }; -}; - -&hdmi { - status = "okay"; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&i2c0 { - status = "okay"; - - axp22x: pmic@34 { - compatible = "x-powers,axp221"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -#include "axp22x.dtsi" - -&mmc0 { - vmmc-supply = <®_dcdc1>; - bus-width = <4>; - cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */ - status = "okay"; -}; - -&mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pg_pins>; - vmmc-supply = <®_dldo2>; - vqmmc-supply = <®_dldo1>; - mmc-pwrseq = <&wifi_pwrseq>; - bus-width = <4>; - non-removable; - status = "okay"; -}; - -&pio { - pinctrl-names = "default"; - pinctrl-0 = <&clk_out_a_pin>; - vcc-pa-supply = <®_aldo2>; - vcc-pc-supply = <®_dcdc1>; - vcc-pd-supply = <®_dcdc1>; - vcc-pe-supply = <®_eldo1>; - vcc-pf-supply = <®_dcdc1>; - vcc-pg-supply = <®_dldo1>; -}; - -®_aldo2 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-name = "vcc-pa"; -}; - -®_aldo3 { - regulator-always-on; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3300000>; - regulator-name = "avcc"; -}; - -®_dc1sw { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-gmac-phy"; -}; - -®_dcdc1 { - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-3v3"; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1300000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1300000>; - regulator-name = "vdd-sys"; -}; - -®_dcdc5 { - regulator-always-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vcc-dram"; -}; - -®_dldo1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi-io"; -}; - -/* - * Our WiFi chip needs both DLDO2 and DLDO3 to be powered at the same - * time, with the two being in sync, to be able to meet maximum power - * consumption during transmits. Since this is not really supported - * right now, just use the two as always on, and we will fix it later. - */ - -®_dldo2 { - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; -}; - -®_dldo3 { - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi-2"; -}; - -®_dldo4 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-name = "vdd2v5-sata"; -}; - -®_eldo3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-name = "vdd1v2-sata"; -}; - -&tcon_tv0 { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>; - uart-has-rtscts; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - clocks = <&ccu CLK_OUTA>; - clock-names = "lpo"; - vbat-supply = <®_dldo2>; - vddio-supply = <®_dldo1>; - device-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ - /* TODO host wake line connected to PMIC GPIO pins */ - shutdown-gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */ - max-speed = <1500000>; - }; -}; - -&usbphy { - usb1_vbus-supply = <®_vcc5v0>; - status = "okay"; -}; |