diff options
Diffstat (limited to 'dts/src/arm/sun9i-a80-cubieboard4.dts')
-rw-r--r-- | dts/src/arm/sun9i-a80-cubieboard4.dts | 508 |
1 files changed, 0 insertions, 508 deletions
diff --git a/dts/src/arm/sun9i-a80-cubieboard4.dts b/dts/src/arm/sun9i-a80-cubieboard4.dts deleted file mode 100644 index 1fe251ea94..0000000000 --- a/dts/src/arm/sun9i-a80-cubieboard4.dts +++ /dev/null @@ -1,508 +0,0 @@ -/* - * Copyright 2015 Tyler Baker - * - * Tyler Baker <tyler.baker@linaro.org> - * Chen-Yu Tsai <wens@csie.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun9i-a80.dtsi" - -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "Cubietech Cubieboard4"; - compatible = "cubietech,a80-cubieboard4", "allwinner,sun9i-a80"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - leds { - compatible = "gpio-leds"; - - led-0 { - label = "cubieboard4:green:usr"; - gpios = <&pio 7 17 GPIO_ACTIVE_HIGH>; /* PH17 */ - }; - - led-1 { - label = "cubieboard4:red:usr"; - gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ - }; - }; - - vga-connector { - compatible = "vga-connector"; - label = "vga"; - ddc-i2c-bus = <&i2c3>; - - port { - vga_con_in: endpoint { - remote-endpoint = <&vga_dac_out>; - }; - }; - }; - - vga-dac { - compatible = "corpro,gm7123", "adi,adv7123", "dumb-vga-dac"; - vdd-supply = <®_dcdc1>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - vga_dac_in: endpoint { - remote-endpoint = <&tcon0_out_vga>; - }; - }; - - port@1 { - reg = <1>; - - vga_dac_out: endpoint { - remote-endpoint = <&vga_con_in>; - }; - }; - }; - }; - - wifi_pwrseq: wifi-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&ac100_rtc 1>; - clock-names = "ext_clock"; - /* enables internal regulator and de-asserts reset */ - reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */ - }; -}; - -&de { - status = "okay"; -}; - -&gmac { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_rgmii_pins>; - phy-handle = <&phy1>; - phy-mode = "rgmii-id"; - phy-supply = <®_cldo1>; - status = "okay"; -}; - -&i2c3 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins>; - status = "okay"; -}; - -&mdio { - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; - vmmc-supply = <®_dcdc1>; - bus-width = <4>; - cd-gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; /* PH18 */ - status = "okay"; -}; - -&mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins>; - vmmc-supply = <®_dldo1>; - vqmmc-supply = <®_cldo3>; - mmc-pwrseq = <&wifi_pwrseq>; - bus-width = <4>; - non-removable; - status = "okay"; -}; - -&mmc1_pins { - bias-pull-up; -}; - -&mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_8bit_pins>; - vmmc-supply = <®_dcdc1>; - bus-width = <8>; - non-removable; - cap-mmc-hw-reset; - status = "okay"; -}; - -&mmc2_8bit_pins { - /* Increase drive strength for DDR modes */ - drive-strength = <40>; -}; - -&osc32k { - /* osc32k input is from AC100 */ - clocks = <&ac100_rtc 0>; -}; - -&pio { - vcc-pa-supply = <®_ldo_io1>; - vcc-pb-supply = <®_aldo2>; - vcc-pc-supply = <®_dcdc1>; - vcc-pd-supply = <®_dc1sw>; - vcc-pe-supply = <®_eldo2>; - vcc-pf-supply = <®_dcdc1>; - vcc-pg-supply = <®_ldo_io0>; - vcc-ph-supply = <®_dcdc1>; -}; - -&r_ir { - status = "okay"; -}; - -&r_pio { - vcc-pl-supply = <®_dldo2>; - vcc-pm-supply = <®_eldo3>; -}; - -&r_rsb { - status = "okay"; - - axp809: pmic@3a3 { - reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - regulators { - reg_aldo1: aldo1 { - /* - * TODO: This should be handled by the - * USB PHY driver. - */ - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc33-usbh"; - }; - - reg_aldo2: aldo2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc-pb-io-cam"; - }; - - aldo3 { - /* unused */ - }; - - reg_dc1sw: dc1sw { - regulator-name = "vcc-pd"; - }; - - reg_dc5ldo: dc5ldo { - regulator-always-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1100000>; - regulator-name = "vdd-cpus-09-usbh"; - }; - - reg_dcdc1: dcdc1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v"; - }; - - reg_dcdc2: dcdc2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1100000>; - regulator-name = "vdd-gpu"; - }; - - reg_dcdc3: dcdc3 { - regulator-always-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1100000>; - regulator-name = "vdd-cpua"; - }; - - reg_dcdc4: dcdc4 { - regulator-always-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1100000>; - regulator-name = "vdd-sys-usb0-hdmi"; - }; - - reg_dcdc5: dcdc5 { - regulator-always-on; - regulator-min-microvolt = <1425000>; - regulator-max-microvolt = <1575000>; - regulator-name = "vcc-dram"; - }; - - reg_dldo1: dldo1 { - /* - * The WiFi chip supports a wide range - * (3.0 ~ 4.8V) of voltages, and so does - * this regulator (3.0 ~ 4.2V), but - * Allwinner SDK always sets it to 3.3V. - */ - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; - }; - - reg_dldo2: dldo2 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-pl"; - }; - - reg_eldo1: eldo1 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-name = "vcc-dvdd-cam"; - }; - - reg_eldo2: eldo2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc-pe"; - }; - - reg_eldo3: eldo3 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-pm-codec-io1"; - }; - - reg_ldo_io0: ldo_io0 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-pg"; - }; - - reg_ldo_io1: ldo_io1 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-name = "vcc-pa-gmac-2v5"; - }; - - reg_rtc_ldo: rtc_ldo { - regulator-name = "vcc-rtc-vdd1v8-io"; - }; - - sw { - /* unused */ - }; - }; - }; - - axp806: pmic@745 { - compatible = "x-powers,axp806"; - reg = <0x745>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <1>; - bldoin-supply = <®_dcdce>; - - regulators { - reg_s_aldo1: aldo1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; - }; - - aldo2 { - /* - * unused, but use a different name to - * avoid name clash with axp809's aldo's - */ - regulator-name = "s_aldo2"; - }; - - aldo3 { - /* - * unused, but use a different name to - * avoid name clash with axp809's aldo's - */ - regulator-name = "s_aldo3"; - }; - - reg_bldo1: bldo1 { - regulator-always-on; - regulator-min-microvolt = <1700000>; - regulator-max-microvolt = <1900000>; - regulator-name = "vcc18-efuse-adc-display-csi"; - }; - - reg_bldo2: bldo2 { - regulator-always-on; - regulator-min-microvolt = <1700000>; - regulator-max-microvolt = <1900000>; - regulator-name = - "vdd18-drampll-vcc18-pll-cpvdd"; - }; - - bldo3 { - /* unused */ - }; - - reg_bldo4: bldo4 { - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1300000>; - regulator-name = "vcc12-hsic"; - }; - - reg_cldo1: cldo1 { - /* - * This was 3V in the original design, but - * 3.3V is the recommended supply voltage - * for the Ethernet PHY. - */ - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - /* - * The PHY requires 20ms after all voltages - * are applied until core logic is ready and - * 30ms after the reset pin is de-asserted. - * Set a 100ms delay to account for PMIC - * ramp time and board traces. - */ - regulator-enable-ramp-delay = <100000>; - regulator-name = "vcc-gmac-phy"; - }; - - reg_cldo2: cldo2 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-name = "afvcc-cam"; - }; - - reg_cldo3: cldo3 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-io-wifi-codec-io2"; - }; - - reg_dcdca: dcdca { - regulator-always-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1100000>; - regulator-name = "vdd-cpub"; - }; - - reg_dcdcd: dcdcd { - regulator-always-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1100000>; - regulator-name = "vdd-vpu"; - }; - - reg_dcdce: dcdce { - regulator-always-on; - regulator-min-microvolt = <2100000>; - regulator-max-microvolt = <2100000>; - regulator-name = "vcc-bldo-codec-ldoin"; - }; - - sw { - /* - * unused, but use a different name to - * avoid name clash with axp809's sw - */ - regulator-name = "s_sw"; - }; - }; - }; - - ac100: codec@e89 { - compatible = "x-powers,ac100"; - reg = <0xe89>; - - ac100_codec: codec { - compatible = "x-powers,ac100-codec"; - interrupt-parent = <&r_pio>; - interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */ - #clock-cells = <0>; - clock-output-names = "4M_adda"; - }; - - ac100_rtc: rtc { - compatible = "x-powers,ac100-rtc"; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - clocks = <&ac100_codec>; - #clock-cells = <1>; - clock-output-names = "cko1_rtc", - "cko2_rtc", - "cko3_rtc"; - }; - }; -}; - -#include "axp809.dtsi" - -&tcon0 { - pinctrl-names = "default"; - pinctrl-0 = <&lcd0_rgb888_pins>; -}; - -&tcon0_out { - tcon0_out_vga: endpoint { - remote-endpoint = <&vga_dac_in>; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_ph_pins>; - status = "okay"; -}; |