diff options
Diffstat (limited to 'dts/src/arm/sun9i-a80.dtsi')
| -rw-r--r-- | dts/src/arm/sun9i-a80.dtsi | 65 |
1 files changed, 65 insertions, 0 deletions
diff --git a/dts/src/arm/sun9i-a80.dtsi b/dts/src/arm/sun9i-a80.dtsi index d9532fb1ef..6fb292e0b6 100644 --- a/dts/src/arm/sun9i-a80.dtsi +++ b/dts/src/arm/sun9i-a80.dtsi @@ -56,6 +56,10 @@ #size-cells = <2>; interrupt-parent = <&gic>; + aliases { + ethernet0 = &gmac; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -183,6 +187,37 @@ clock-output-names = "osc32k"; }; + /* + * The following two are dummy clocks, placeholders + * used in the gmac_tx clock. The gmac driver will + * choose one parent depending on the PHY interface + * mode, using clk_set_rate auto-reparenting. + * + * The actual TX clock rate is not controlled by the + * gmac_tx clock. + */ + mii_phy_tx_clk: mii_phy_tx_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + clock-output-names = "mii_phy_tx"; + }; + + gmac_int_tx_clk: gmac_int_tx_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_int_tx"; + }; + + gmac_tx_clk: clk@800030 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-gmac-clk"; + reg = <0x00800030 0x4>; + clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>; + clock-output-names = "gmac_tx"; + }; + cpus_clk: clk@8001410 { compatible = "allwinner,sun9i-a80-cpus-clk"; reg = <0x08001410 0x4>; @@ -283,6 +318,23 @@ }; }; + gmac: ethernet@830000 { + compatible = "allwinner,sun7i-a20-gmac"; + reg = <0x00830000 0x1054>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&ccu CLK_BUS_GMAC>, <&gmac_tx_clk>; + clock-names = "stmmaceth", "allwinner_gmac_tx"; + resets = <&ccu RST_BUS_GMAC>; + reset-names = "stmmaceth"; + snps,pbl = <2>; + snps,fixed-burst; + snps,force_sf_dma_mode; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + ehci0: usb@a00000 { compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; reg = <0x00a00000 0x100>; @@ -948,6 +1000,19 @@ #size-cells = <0>; #gpio-cells = <3>; + gmac_rgmii_pins: gmac-rgmii-pins { + allwinner,pins = "PA0", "PA1", "PA2", "PA3", + "PA4", "PA5", "PA7", "PA8", + "PA9", "PA10", "PA12", "PA13", + "PA15", "PA16", "PA17"; + allwinner,function = "gmac"; + /* + * data lines in RGMII mode use DDR mode + * and need a higher signal drive strength + */ + drive-strength = <40>; + }; + i2c3_pins: i2c3-pins { pins = "PG10", "PG11"; function = "i2c3"; |