diff options
Diffstat (limited to 'dts/src/arm/tegra124-apalis.dtsi')
| -rw-r--r-- | dts/src/arm/tegra124-apalis.dtsi | 72 |
1 files changed, 30 insertions, 42 deletions
diff --git a/dts/src/arm/tegra124-apalis.dtsi b/dts/src/arm/tegra124-apalis.dtsi index 5d9b18ef5a..65a2161b9b 100644 --- a/dts/src/arm/tegra124-apalis.dtsi +++ b/dts/src/arm/tegra124-apalis.dtsi @@ -1,5 +1,5 @@ /* - * Copyright 2016 Toradex AG + * Copyright 2016-2018 Toradex AG * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -56,7 +56,6 @@ pcie@1003000 { status = "okay"; - avddio-pex-supply = <&vdd_1v05>; avdd-pex-pll-supply = <&vdd_1v05>; avdd-pll-erefe-supply = <&avdd_1v05>; @@ -85,7 +84,6 @@ hdmi@54280000 { pll-supply = <®_1v05_avdd_hdmi_pll>; vdd-supply = <®_3v3_avdd_hdmi>; - nvidia,ddc-i2c-bus = <&hdmi_ddc>; nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; @@ -453,12 +451,12 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - /* PWM3 active on pu6 being Apalis BKL1_PWM */ + /* PWM3 active on pu6 being Apalis BKL1_PWM as well */ ph3 { nvidia,pins = "ph3"; - nvidia,function = "gmi"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,function = "pwm3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; @@ -1579,7 +1577,7 @@ }; hdmi_ddc: i2c@7000c400 { - clock-frequency = <100000>; + clock-frequency = <10000>; }; /* PWR_I2C: power I2C to audio codec, PMIC and temperature sensor */ @@ -1600,15 +1598,11 @@ compatible = "ams,as3722"; reg = <0x40>; interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; - ams,system-power-controller; - #interrupt-cells = <2>; interrupt-controller; - gpio-controller; #gpio-cells = <2>; - pinctrl-names = "default"; pinctrl-0 = <&as3722_default>; @@ -1620,9 +1614,9 @@ bias-pull-up; }; - gpio1_3_4_5_6 { - pins = "gpio1", "gpio3", "gpio4", - "gpio5", "gpio6"; + gpio0_1_3_4_5_6 { + pins = "gpio0", "gpio1", "gpio3", + "gpio4", "gpio5", "gpio6"; bias-high-impedance; }; }; @@ -1783,7 +1777,6 @@ reg = <0x4c>; interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; - #thermal-sensor-cells = <1>; }; }; @@ -1816,7 +1809,6 @@ sata@70020000 { phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>; phy-names = "sata-0"; - avdd-supply = <&vdd_1v05>; hvdd-supply = <®_3v3>; vddio-supply = <&vdd_1v05>; @@ -1830,7 +1822,6 @@ <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>; phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0"; - avddio-pex-supply = <&vdd_1v05>; avdd-pll-erefe-supply = <&avdd_1v05>; avdd-pll-utmip-supply = <&vddio_1v8>; @@ -2041,53 +2032,50 @@ thermal-zones { cpu { trips { - trip@0 { + cpu-shutdown-trip { temperature = <101000>; hysteresis = <0>; type = "critical"; }; }; - - cooling-maps { - /* - * There are currently no cooling maps because - * there are no cooling devices - */ - }; }; mem { trips { - trip@0 { + mem-shutdown-trip { temperature = <101000>; hysteresis = <0>; type = "critical"; }; }; - - cooling-maps { - /* - * There are currently no cooling maps because - * there are no cooling devices - */ - }; }; gpu { trips { - trip@0 { + gpu-shutdown-trip { temperature = <101000>; hysteresis = <0>; type = "critical"; }; }; - - cooling-maps { - /* - * There are currently no cooling maps because - * there are no cooling devices - */ - }; }; }; }; + +&gpio { + /* I210 Gigabit Ethernet Controller Reset */ + lan_reset_n { + gpio-hog; + gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "LAN_RESET_N"; + }; + + /* Control MXM3 pin 26 Reset Module Output Carrier Input */ + reset_moci_ctrl { + gpio-hog; + gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "RESET_MOCI_CTRL"; + }; +}; |