diff options
Diffstat (limited to 'dts/src/arm/tegra124-nyan.dtsi')
-rw-r--r-- | dts/src/arm/tegra124-nyan.dtsi | 841 |
1 files changed, 0 insertions, 841 deletions
diff --git a/dts/src/arm/tegra124-nyan.dtsi b/dts/src/arm/tegra124-nyan.dtsi deleted file mode 100644 index a93cfb492b..0000000000 --- a/dts/src/arm/tegra124-nyan.dtsi +++ /dev/null @@ -1,841 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include <dt-bindings/input/input.h> -#include <dt-bindings/thermal/thermal.h> -#include "tegra124.dtsi" - -/ { - aliases { - rtc0 = "/i2c@7000d000/pmic@40"; - rtc1 = "/rtc@7000e000"; - serial0 = &uarta; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - /* - * Note that recent version of the device tree compiler (starting with - * version 1.4.2) warn about this node containing a reg property, but - * missing a unit-address. However, the bootloader on these Chromebook - * devices relies on the full name of this node to be exactly /memory. - * Adding the unit-address causes the bootloader to create a /memory - * node and write the memory bank configuration to that node, which in - * turn leads the kernel to believe that the device has 2 GiB of - * memory instead of the amount detected by the bootloader. - * - * The name of this node is effectively ABI and must not be changed. - */ - memory { - device_type = "memory"; - reg = <0x0 0x80000000 0x0 0x80000000>; - }; - - /delete-node/ memory@80000000; - - host1x@50000000 { - hdmi@54280000 { - status = "okay"; - - vdd-supply = <&vdd_3v3_hdmi>; - pll-supply = <&vdd_hdmi_pll>; - hdmi-supply = <&vdd_5v0_hdmi>; - - nvidia,ddc-i2c-bus = <&hdmi_ddc>; - nvidia,hpd-gpio = - <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; - }; - - sor@54540000 { - status = "okay"; - - avdd-io-hdmi-dp-supply = <&vdd_3v3_hdmi>; - vdd-hdmi-dp-pll-supply = <&vdd_hdmi_pll>; - - nvidia,dpaux = <&dpaux>; - nvidia,panel = <&panel>; - }; - - dpaux@545c0000 { - vdd-supply = <&vdd_3v3_panel>; - status = "okay"; - }; - }; - - gpu@57000000 { - status = "okay"; - - vdd-supply = <&vdd_gpu>; - }; - - serial@70006000 { - /* Debug connector on the bottom of the board near SD card. */ - status = "okay"; - }; - - pwm@7000a000 { - status = "okay"; - }; - - i2c@7000c000 { - status = "okay"; - clock-frequency = <100000>; - - acodec: audio-codec@10 { - compatible = "maxim,max98090"; - reg = <0x10>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>; - }; - - tmp451: temperature-sensor@4c { - compatible = "ti,tmp451"; - reg = <0x4c>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_EDGE_FALLING>; - - #thermal-sensor-cells = <1>; - }; - }; - - i2c@7000c400 { - status = "okay"; - clock-frequency = <100000>; - - trackpad@15 { - compatible = "elan,ekth3000"; - reg = <0x15>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>; - wakeup-source; - }; - }; - - i2c@7000c500 { - status = "okay"; - clock-frequency = <400000>; - - tpm@20 { - compatible = "infineon,slb9645tt"; - reg = <0x20>; - }; - }; - - hdmi_ddc: i2c@7000c700 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000d000 { - status = "okay"; - clock-frequency = <400000>; - - pmic: pmic@40 { - compatible = "ams,as3722"; - reg = <0x40>; - interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; - - ams,system-power-controller; - - #interrupt-cells = <2>; - interrupt-controller; - - gpio-controller; - #gpio-cells = <2>; - - pinctrl-names = "default"; - pinctrl-0 = <&as3722_default>; - - as3722_default: pinmux { - gpio0 { - pins = "gpio0"; - function = "gpio"; - bias-pull-down; - }; - - gpio1 { - pins = "gpio1"; - function = "gpio"; - bias-pull-up; - }; - - gpio2_4_7 { - pins = "gpio2", "gpio4", "gpio7"; - function = "gpio"; - bias-pull-up; - }; - - gpio3_6 { - pins = "gpio3", "gpio6"; - bias-high-impedance; - }; - - gpio5 { - pins = "gpio5"; - function = "clk32k-out"; - bias-pull-down; - }; - }; - - regulators { - vsup-sd2-supply = <&vdd_5v0_sys>; - vsup-sd3-supply = <&vdd_5v0_sys>; - vsup-sd4-supply = <&vdd_5v0_sys>; - vsup-sd5-supply = <&vdd_5v0_sys>; - vin-ldo0-supply = <&vdd_1v35_lp0>; - vin-ldo1-6-supply = <&vdd_3v3_run>; - vin-ldo2-5-7-supply = <&vddio_1v8>; - vin-ldo3-4-supply = <&vdd_3v3_sys>; - vin-ldo9-10-supply = <&vdd_5v0_sys>; - vin-ldo11-supply = <&vdd_3v3_run>; - - vdd_cpu: sd0 { - regulator-name = "+VDD_CPU_AP"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1350000>; - regulator-min-microamp = <3500000>; - regulator-max-microamp = <3500000>; - regulator-always-on; - regulator-boot-on; - ams,ext-control = <2>; - }; - - sd1 { - regulator-name = "+VDD_CORE"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1350000>; - regulator-min-microamp = <2500000>; - regulator-max-microamp = <4000000>; - regulator-always-on; - regulator-boot-on; - ams,ext-control = <1>; - }; - - vdd_1v35_lp0: sd2 { - regulator-name = "+1.35V_LP0(sd2)"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - sd3 { - regulator-name = "+1.35V_LP0(sd3)"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_1v05_run: sd4 { - regulator-name = "+1.05V_RUN"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - - vddio_1v8: sd5 { - regulator-name = "+1.8V_VDDIO"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vdd_gpu: sd6 { - regulator-name = "+VDD_GPU_AP"; - regulator-min-microvolt = <650000>; - regulator-max-microvolt = <1200000>; - regulator-min-microamp = <3500000>; - regulator-max-microamp = <3500000>; - regulator-boot-on; - regulator-always-on; - }; - - avdd_1v05_run: ldo0 { - regulator-name = "+1.05V_RUN_AVDD"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - regulator-boot-on; - regulator-always-on; - ams,ext-control = <1>; - }; - - ldo1 { - regulator-name = "+1.8V_RUN_CAM"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo2 { - regulator-name = "+1.2V_GEN_AVDD"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo3 { - regulator-name = "+1.00V_LP0_VDD_RTC"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-boot-on; - regulator-always-on; - ams,enable-tracking; - }; - - vdd_run_cam: ldo4 { - regulator-name = "+3.3V_RUN_CAM"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo5 { - regulator-name = "+1.2V_RUN_CAM_FRONT"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - vddio_sdmmc3: ldo6 { - regulator-name = "+VDDIO_SDMMC3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - ldo7 { - regulator-name = "+1.05V_RUN_CAM_REAR"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - - ldo9 { - regulator-name = "+2.8V_RUN_TOUCH"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo10 { - regulator-name = "+2.8V_RUN_CAM_AF"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo11 { - regulator-name = "+1.8V_RUN_VPP_FUSE"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - }; - }; - }; - - spi@7000d400 { - status = "okay"; - - cros_ec: cros-ec@0 { - compatible = "google,cros-ec-spi"; - spi-max-frequency = <3000000>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>; - reg = <0>; - - google,cros-ec-spi-msg-delay = <2000>; - - i2c-tunnel { - compatible = "google,cros-ec-i2c-tunnel"; - #address-cells = <1>; - #size-cells = <0>; - - google,remote-bus = <0>; - - charger: bq24735@9 { - compatible = "ti,bq24735"; - reg = <0x9>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(J, 0) - IRQ_TYPE_EDGE_BOTH>; - ti,ac-detect-gpios = <&gpio - TEGRA_GPIO(J, 0) - GPIO_ACTIVE_HIGH>; - ti,external-control; - }; - - battery: sbs-battery@b { - compatible = "sbs,sbs-battery"; - reg = <0xb>; - sbs,i2c-retry-count = <2>; - sbs,poll-retry-count = <10>; - power-supplies = <&charger>; - }; - }; - }; - }; - - spi@7000da00 { - status = "okay"; - spi-max-frequency = <25000000>; - - flash@0 { - compatible = "winbond,w25q32dw", "jedec,spi-nor"; - spi-max-frequency = <25000000>; - reg = <0>; - }; - }; - - pmc@7000e400 { - nvidia,invert-interrupt; - nvidia,suspend-mode = <0>; - nvidia,cpu-pwr-good-time = <500>; - nvidia,cpu-pwr-off-time = <300>; - nvidia,core-pwr-good-time = <641 3845>; - nvidia,core-pwr-off-time = <61036>; - nvidia,core-power-req-active-high; - nvidia,sys-clock-req-active-high; - }; - - cec@70015000 { - status = "okay"; - }; - - hda@70030000 { - status = "okay"; - }; - - usb@70090000 { - phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */ - <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */ - <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */ - <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */ - <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */ - phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1"; - - avddio-pex-supply = <&vdd_1v05_run>; - dvddio-pex-supply = <&vdd_1v05_run>; - avdd-usb-supply = <&vdd_3v3_lp0>; - avdd-pll-utmip-supply = <&vddio_1v8>; - avdd-pll-erefe-supply = <&avdd_1v05_run>; - avdd-usb-ss-pll-supply = <&vdd_1v05_run>; - hvdd-usb-ss-supply = <&vdd_3v3_lp0>; - hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>; - - status = "okay"; - }; - - padctl@7009f000 { - status = "okay"; - - avdd-pll-utmip-supply = <&vddio_1v8>; - avdd-pll-erefe-supply = <&avdd_1v05_run>; - avdd-pex-pll-supply = <&vdd_1v05_run>; - hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>; - - pads { - usb2 { - status = "okay"; - - lanes { - usb2-0 { - nvidia,function = "xusb"; - status = "okay"; - }; - - usb2-1 { - nvidia,function = "xusb"; - status = "okay"; - }; - - usb2-2 { - nvidia,function = "xusb"; - status = "okay"; - }; - }; - }; - - pcie { - status = "okay"; - - lanes { - pcie-0 { - nvidia,function = "usb3-ss"; - status = "okay"; - }; - - pcie-1 { - nvidia,function = "usb3-ss"; - status = "okay"; - }; - }; - }; - }; - - ports { - usb2-0 { - vbus-supply = <&vdd_usb1_vbus>; - status = "okay"; - mode = "otg"; - usb-role-switch; - }; - - usb2-1 { - vbus-supply = <&vdd_run_cam>; - status = "okay"; - mode = "host"; - }; - - usb2-2 { - vbus-supply = <&vdd_usb3_vbus>; - status = "okay"; - mode = "host"; - }; - - usb3-0 { - nvidia,usb2-companion = <0>; - status = "okay"; - }; - - usb3-1 { - nvidia,usb2-companion = <1>; - status = "okay"; - }; - }; - }; - - sdhci0_pwrseq: sdhci0_pwrseq { - compatible = "mmc-pwrseq-simple"; - - reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; - }; - - mmc@700b0000 { /* WiFi/BT on this bus */ - status = "okay"; - bus-width = <4>; - no-1-8-v; - non-removable; - mmc-pwrseq = <&sdhci0_pwrseq>; - vmmc-supply = <&vdd_3v3_lp0>; - vqmmc-supply = <&vddio_1v8>; - keep-power-in-suspend; - }; - - mmc@700b0400 { /* SD Card on this bus */ - status = "okay"; - cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; - power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; - bus-width = <4>; - no-1-8-v; - vqmmc-supply = <&vddio_sdmmc3>; - }; - - mmc@700b0600 { /* eMMC on this bus */ - status = "okay"; - bus-width = <8>; - no-1-8-v; - non-removable; - }; - - /* CPU DFLL clock */ - clock@70110000 { - status = "okay"; - vdd-cpu-supply = <&vdd_cpu>; - nvidia,i2c-fs-rate = <400000>; - }; - - ahub@70300000 { - i2s@70301100 { - status = "okay"; - }; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - - enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; - power-supply = <&vdd_led>; - pwms = <&pwm 1 1000000>; - - default-brightness-level = <224>; - brightness-levels = - < 0 1 2 3 4 5 6 7 - 8 9 10 11 12 13 14 15 - 16 17 18 19 20 21 22 23 - 24 25 26 27 28 29 30 31 - 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 - 48 49 50 51 52 53 54 55 - 56 57 58 59 60 61 62 63 - 64 65 66 67 68 69 70 71 - 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 - 88 89 90 91 92 93 94 95 - 96 97 98 99 100 101 102 103 - 104 105 106 107 108 109 110 111 - 112 113 114 115 116 117 118 119 - 120 121 122 123 124 125 126 127 - 128 129 130 131 132 133 134 135 - 136 137 138 139 140 141 142 143 - 144 145 146 147 148 149 150 151 - 152 153 154 155 156 157 158 159 - 160 161 162 163 164 165 166 167 - 168 169 170 171 172 173 174 175 - 176 177 178 179 180 181 182 183 - 184 185 186 187 188 189 190 191 - 192 193 194 195 196 197 198 199 - 200 201 202 203 204 205 206 207 - 208 209 210 211 212 213 214 215 - 216 217 218 219 220 221 222 223 - 224 225 226 227 228 229 230 231 - 232 233 234 235 236 237 238 239 - 240 241 242 243 244 245 246 247 - 248 249 250 251 252 253 254 255 - 256>; - }; - - clk32k_in: clock-32k { - compatible = "fixed-clock"; - clock-frequency = <32768>; - #clock-cells = <0>; - }; - - cpus { - cpu@0 { - vdd-cpu-supply = <&vdd_cpu>; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - lid { - label = "Lid"; - gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>; - linux,input-type = <5>; - linux,code = <KEY_RESERVED>; - debounce-interval = <1>; - wakeup-source; - }; - - power { - label = "Power"; - gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - debounce-interval = <30>; - wakeup-source; - }; - }; - - vdd_mux: regulator-mux { - compatible = "regulator-fixed"; - regulator-name = "+VDD_MUX"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_5v0_sys: regulator-5v0sys { - compatible = "regulator-fixed"; - regulator-name = "+5V_SYS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vdd_mux>; - }; - - vdd_3v3_sys: regulator-3v3sys { - compatible = "regulator-fixed"; - regulator-name = "+3.3V_SYS"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vdd_mux>; - }; - - vdd_3v3_run: regulator-3v3run { - compatible = "regulator-fixed"; - regulator-name = "+3.3V_RUN"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_3v3_sys>; - }; - - vdd_3v3_hdmi: regulator-3v3hdmi { - compatible = "regulator-fixed"; - regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vdd_3v3_run>; - }; - - vdd_led: regulator-led { - compatible = "regulator-fixed"; - regulator-name = "+VDD_LED"; - gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_mux>; - }; - - vdd_5v0_ts: regulator-ts { - compatible = "regulator-fixed"; - regulator-name = "+5V_VDD_TS_SW"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-boot-on; - gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_5v0_sys>; - }; - - vdd_usb1_vbus: regulator-usb1 { - compatible = "regulator-fixed"; - regulator-name = "+5V_USB_HS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; - enable-active-high; - gpio-open-drain; - vin-supply = <&vdd_5v0_sys>; - }; - - vdd_usb3_vbus: regulator-usb3 { - compatible = "regulator-fixed"; - regulator-name = "+5V_USB_SS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; - enable-active-high; - gpio-open-drain; - vin-supply = <&vdd_5v0_sys>; - }; - - vdd_3v3_panel: regulator-panel { - compatible = "regulator-fixed"; - regulator-name = "+3.3V_PANEL"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&pmic 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_3v3_run>; - }; - - vdd_3v3_lp0: regulator-lp0 { - compatible = "regulator-fixed"; - regulator-name = "+3.3V_LP0"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - /* - * TODO: find a way to wire this up with the USB EHCI - * controllers so that it can be enabled on demand. - */ - regulator-always-on; - gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_3v3_sys>; - }; - - vdd_hdmi_pll: regulator-hdmipll { - compatible = "regulator-fixed"; - regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; - vin-supply = <&vdd_1v05_run>; - }; - - vdd_5v0_hdmi: regulator-hdmicon { - compatible = "regulator-fixed"; - regulator-name = "+5V_HDMI_CON"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_5v0_sys>; - }; - - sound { - nvidia,audio-routing = - "Headphones", "HPR", - "Headphones", "HPL", - "Speakers", "SPKR", - "Speakers", "SPKL", - "Mic Jack", "MICBIAS", - "DMICL", "Int Mic", - "DMICR", "Int Mic", - "IN34", "Mic Jack"; - - nvidia,i2s-controller = <&tegra_i2s1>; - nvidia,audio-codec = <&acodec>; - - clocks = <&tegra_car TEGRA124_CLK_PLL_A>, - <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, - <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; - clock-names = "pll_a", "pll_a_out0", "mclk"; - - assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>, - <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; - - assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA124_CLK_EXTERN1>; - - nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>; - nvidia,mic-det-gpios = - <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>; - }; - - gpio-restart { - compatible = "gpio-restart"; - gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; - priority = <200>; - }; - - cpus { - cpu0: cpu@0 { - #cooling-cells = <2>; - }; - - cpu1: cpu@1 { - #cooling-cells = <2>; - }; - - cpu2: cpu@2 { - #cooling-cells = <2>; - }; - - cpu3: cpu@3 { - #cooling-cells = <2>; - }; - }; - - thermal-zones { - cpu-skin-thermal { - polling-delay-passive = <1000>; /* milliseconds */ - polling-delay = <5000>; /* milliseconds */ - - thermal-sensors = <&tmp451 0>; - - trips { - cpu_passive_trip: cpu-alert0 { - /* throttle at 70C until temperature drops to 69.8C */ - temperature = <70000>; - hysteresis = <200>; - type = "passive"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_passive_trip>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - }; -}; - -#include "cros-ec-keyboard.dtsi" |