diff options
Diffstat (limited to 'dts/src/arm/vf-colibri-eval-v3.dtsi')
| -rw-r--r-- | dts/src/arm/vf-colibri-eval-v3.dtsi | 152 |
1 files changed, 0 insertions, 152 deletions
diff --git a/dts/src/arm/vf-colibri-eval-v3.dtsi b/dts/src/arm/vf-colibri-eval-v3.dtsi deleted file mode 100644 index c12a1b8bc0..0000000000 --- a/dts/src/arm/vf-colibri-eval-v3.dtsi +++ /dev/null @@ -1,152 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT -/* - * Copyright 2014-2020 Toradex - */ - -/ { - chosen { - stdout-path = "serial0:115200n8"; - }; - - clk16m: clk16m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <16000000>; - }; - - panel: panel { - compatible = "edt,et057090dhu"; - backlight = <&bl>; - - port { - panel_in: endpoint { - remote-endpoint = <&dcu_out>; - }; - }; - }; - - reg_3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - reg_5v0: regulator-5v0 { - compatible = "regulator-fixed"; - regulator-name = "5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_usbh_vbus: regulator-usbh-vbus { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1_reg>; - regulator-name = "VCC_USB[1-4]"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio2 19 GPIO_ACTIVE_LOW>; /* USBH_PEN resp. USBH_P_EN */ - vin-supply = <®_5v0>; - }; -}; - -&bl { - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; - power-supply = <®_3v3>; - status = "okay"; -}; - -&dcu0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_dcu0_1>; - status = "okay"; - - port { - dcu_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; -}; - -&dspi1 { - status = "okay"; - - mcp2515can: can@0 { - compatible = "microchip,mcp2515"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can_int>; - reg = <0>; - clocks = <&clk16m>; - spi-max-frequency = <10000000>; - interrupt-parent = <&gpio1>; - interrupts = <11 IRQ_TYPE_EDGE_RISING>; - }; -}; - -&esdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc1>; - bus-width = <4>; - status = "okay"; -}; - -&fec1 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec1>; - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - /* M41T0M6 real time clock on carrier board */ - rtc: m41t0m6@68 { - compatible = "st,m41t0"; - reg = <0x68>; - }; -}; - -&pwm0 { - status = "okay"; -}; - -&pwm1 { - status = "okay"; -}; - -®_module_3v3 { - vin-supply = <®_3v3>; -}; - -&tcon0 { - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_usbh_vbus>; -}; - -&iomuxc { - vf610-colibri { - pinctrl_can_int: can_int { - fsl,pins = < - VF610_PAD_PTB21__GPIO_43 0x22ed - >; - }; - }; -}; |