summaryrefslogtreecommitdiffstats
path: root/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm64/allwinner/sun50i-a64-pinebook.dts')
-rw-r--r--dts/src/arm64/allwinner/sun50i-a64-pinebook.dts204
1 files changed, 134 insertions, 70 deletions
diff --git a/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts b/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts
index 3d894b2089..50ed2e9f10 100644
--- a/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts
+++ b/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts
@@ -15,44 +15,30 @@
/ {
model = "Pinebook";
compatible = "pine64,pinebook", "allwinner,sun50i-a64";
+ chassis-type = "laptop";
aliases {
serial0 = &uart0;
ethernet0 = &rtl8723cs;
};
- vdd_bl: regulator@0 {
- compatible = "regulator-fixed";
- regulator-name = "bl-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
- enable-active-high;
- };
-
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 50000 0>;
brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>;
default-brightness-level = <2>;
enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
- power-supply = <&vdd_bl>;
+ power-supply = <&reg_vbklt>;
};
chosen {
stdout-path = "serial0:115200n8";
-
- framebuffer-lcd {
- panel-supply = <&reg_dc1sw>;
- dvdd25-supply = <&reg_dldo2>;
- dvdd12-supply = <&reg_fldo1>;
- };
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- lid_switch {
+ lid-switch {
label = "Lid Switch";
gpios = <&r_pio 0 12 GPIO_ACTIVE_LOW>; /* PL12 */
linux,input-type = <EV_SW>;
@@ -63,11 +49,34 @@
};
};
- reg_vcc3v3: vcc3v3 {
+ panel_edp: panel-edp {
+ compatible = "neweast,wjfh116008a";
+ backlight = <&backlight>;
+ power-supply = <&reg_dc1sw>;
+
+ port {
+ panel_edp_in: endpoint {
+ remote-endpoint = <&anx6345_out_edp>;
+ };
+ };
+ };
+
+ reg_vbklt: vbklt {
compatible = "regulator-fixed";
- regulator-name = "vcc3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
+ regulator-name = "vbklt";
+ regulator-min-microvolt = <18000000>;
+ regulator-max-microvolt = <18000000>;
+ gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+ enable-active-high;
+ };
+
+ reg_vcc5v0: vcc5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&axp_gpio 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
wifi_pwrseq: wifi_pwrseq {
@@ -77,12 +86,7 @@
speaker_amp: audio-amplifier {
compatible = "simple-audio-amplifier";
- /*
- * TODO This is actually a fixed regulator controlled by
- * the GPIO line on the PMIC. This should be corrected
- * once GPIO support is added for this PMIC.
- */
- VCC-supply = <&reg_ldo_io0>;
+ VCC-supply = <&reg_vcc5v0>;
enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
sound-name-prefix = "Speaker Amp";
};
@@ -118,9 +122,11 @@
status = "okay";
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
- phys = <&usbphy 0>;
- phy-names = "usb";
status = "okay";
};
@@ -128,11 +134,15 @@
status = "okay";
};
+&mixer0 {
+ status = "okay";
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_dcdc1>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
disable-wp;
bus-width = <4>;
status = "okay";
@@ -158,6 +168,7 @@
pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
vmmc-supply = <&reg_dcdc1>;
vqmmc-supply = <&reg_eldo1>;
+ max-frequency = <200000000>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
@@ -166,8 +177,6 @@
};
&ohci0 {
- phys = <&usbphy 0>;
- phy-names = "usb";
status = "okay";
};
@@ -175,10 +184,61 @@
status = "okay";
};
+&pio {
+ vcc-pc-supply = <&reg_eldo1>;
+ vcc-pd-supply = <&reg_dcdc1>;
+ vcc-pe-supply = <&reg_aldo1>;
+ vcc-pg-supply = <&reg_eldo1>;
+};
+
&pwm {
status = "okay";
};
+&r_i2c {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_i2c_pl89_pins>;
+ status = "okay";
+
+ anx6345: anx6345@38 {
+ compatible = "analogix,anx6345";
+ reg = <0x38>;
+ reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
+ dvdd25-supply = <&reg_dldo2>;
+ dvdd12-supply = <&reg_fldo1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ anx6345_in: port@0 {
+ reg = <0>;
+ anx6345_in_tcon0: endpoint {
+ remote-endpoint = <&tcon0_out_anx6345>;
+ };
+ };
+
+ anx6345_out: port@1 {
+ reg = <1>;
+ anx6345_out_edp: endpoint {
+ remote-endpoint = <&panel_edp_in>;
+ };
+ };
+ };
+ };
+};
+
+&r_pio {
+ /*
+ * FIXME: We can't add that supply for now since it would
+ * create a circular dependency between pinctrl, the regulator
+ * and the RSB Bus.
+ *
+ * vcc-pl-supply = <&reg_aldo2>;
+ */
+};
+
&r_rsb {
status = "okay";
@@ -186,18 +246,10 @@
compatible = "x-powers,axp803";
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
};
};
-/* The ANX6345 eDP-bridge is on r_i2c */
-&r_i2c {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&r_i2c_pl89_pins>;
- status = "okay";
-};
-
#include "axp803.dtsi"
&ac_power_supply {
@@ -209,9 +261,7 @@
};
&reg_aldo1 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-name = "vcc-csi";
+ regulator-name = "vcc-pe";
};
&reg_aldo2 {
@@ -274,12 +324,6 @@
regulator-name = "vcc-edp";
};
-&reg_dldo3 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "avdd-csi";
-};
-
&reg_dldo4 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -293,12 +337,6 @@
regulator-name = "cpvdd";
};
-&reg_eldo3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vdd-1v8-csi";
-};
-
&reg_fldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
@@ -312,17 +350,16 @@
regulator-name = "vdd-cpus";
};
-&reg_ldo_io0 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc-usb";
- status = "okay";
-};
-
&reg_rtc_ldo {
regulator-name = "vcc-rtc";
};
+&simplefb_lcd {
+ panel-supply = <&reg_dc1sw>;
+ dvdd25-supply = <&reg_dldo2>;
+ dvdd12-supply = <&reg_fldo1>;
+};
+
&simplefb_hdmi {
vcc-hdmi-supply = <&reg_dldo1>;
};
@@ -335,33 +372,60 @@
"Headphone", "Headphone Jack",
"Speaker", "Internal Speaker";
simple-audio-card,routing =
- "Left DAC", "AIF1 Slot 0 Left",
- "Right DAC", "AIF1 Slot 0 Right",
+ "Left DAC", "DACL",
+ "Right DAC", "DACR",
"Speaker Amp INL", "LINEOUT",
"Speaker Amp INR", "LINEOUT",
"Internal Speaker", "Speaker Amp OUTL",
"Internal Speaker", "Speaker Amp OUTR",
"Headphone Jack", "HP",
- "AIF1 Slot 0 Left ADC", "Left ADC",
- "AIF1 Slot 0 Right ADC", "Right ADC",
+ "ADCL", "Left ADC",
+ "ADCR", "Right ADC",
"Internal Microphone Left", "MBIAS",
"MIC1", "Internal Microphone Left",
"Internal Microphone Right", "HBIAS",
"MIC2", "Internal Microphone Right";
};
+&tcon0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_rgb666_pins>;
+
+ status = "okay";
+};
+
+&tcon0_out {
+ tcon0_out_anx6345: endpoint {
+ remote-endpoint = <&anx6345_in_tcon0>;
+ };
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "realtek,rtl8723cs-bt";
+ device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+ enable-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+ host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+ };
+};
+
&usb_otg {
dr_mode = "host";
};
&usbphy {
- usb0_vbus-supply = <&reg_ldo_io0>;
- usb1_vbus-supply = <&reg_ldo_io0>;
+ usb0_vbus-supply = <&reg_vcc5v0>;
+ usb1_vbus-supply = <&reg_vcc5v0>;
status = "okay";
};
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-19 18:16:32 +0000