summaryrefslogtreecommitdiffstats
path: root/dts/src/arm64/amlogic/meson-g12-common.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm64/amlogic/meson-g12-common.dtsi')
-rw-r--r--dts/src/arm64/amlogic/meson-g12-common.dtsi443
1 files changed, 338 insertions, 105 deletions
diff --git a/dts/src/arm64/amlogic/meson-g12-common.dtsi b/dts/src/arm64/amlogic/meson-g12-common.dtsi
index abe04f4ad7..ff68b911b7 100644
--- a/dts/src/arm64/amlogic/meson-g12-common.dtsi
+++ b/dts/src/arm64/amlogic/meson-g12-common.dtsi
@@ -9,6 +9,7 @@
#include <dt-bindings/clock/g12a-aoclkc.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h>
#include <dt-bindings/reset/amlogic,meson-g12a-reset.h>
#include <dt-bindings/thermal/thermal.h>
@@ -17,6 +18,12 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ mmc0 = &sd_emmc_b; /* SD card */
+ mmc1 = &sd_emmc_c; /* eMMC */
+ mmc2 = &sd_emmc_a; /* SDIO */
+ };
+
chosen {
#address-cells = <2>;
#size-cells = <2>;
@@ -52,6 +59,39 @@
secure-monitor = <&sm>;
};
+ gpu_opp_table: opp-table-gpu {
+ compatible = "operating-points-v2";
+
+ opp-124999998 {
+ opp-hz = /bits/ 64 <124999998>;
+ opp-microvolt = <800000>;
+ };
+ opp-249999996 {
+ opp-hz = /bits/ 64 <249999996>;
+ opp-microvolt = <800000>;
+ };
+ opp-285714281 {
+ opp-hz = /bits/ 64 <285714281>;
+ opp-microvolt = <800000>;
+ };
+ opp-399999994 {
+ opp-hz = /bits/ 64 <399999994>;
+ opp-microvolt = <800000>;
+ };
+ opp-499999992 {
+ opp-hz = /bits/ 64 <499999992>;
+ opp-microvolt = <800000>;
+ };
+ opp-666666656 {
+ opp-hz = /bits/ 64 <666666656>;
+ opp-microvolt = <800000>;
+ };
+ opp-799999987 {
+ opp-hz = /bits/ 64 <799999987>;
+ opp-microvolt = <800000>;
+ };
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
@@ -68,6 +108,12 @@
no-map;
};
+ /* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+ secmon_reserved_bl32: secmon@5300000 {
+ reg = <0x0 0x05300000 0x0 0x2000000>;
+ no-map;
+ };
+
linux,cma {
compatible = "shared-dma-pool";
reusable;
@@ -89,9 +135,9 @@
pcie: pcie@fc000000 {
compatible = "amlogic,g12a-pcie", "snps,dw-pcie";
- reg = <0x0 0xfc000000 0x0 0x400000
- 0x0 0xff648000 0x0 0x2000
- 0x0 0xfc400000 0x0 0x200000>;
+ reg = <0x0 0xfc000000 0x0 0x400000>,
+ <0x0 0xff648000 0x0 0x2000>,
+ <0x0 0xfc400000 0x0 0x200000>;
reg-names = "elbi", "cfg", "config";
interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
@@ -101,8 +147,8 @@
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- ranges = <0x81000000 0 0 0x0 0xfc600000 0 0x00100000
- 0x82000000 0 0xfc700000 0x0 0xfc700000 0 0x1900000>;
+ ranges = <0x81000000 0 0 0x0 0xfc600000 0 0x00100000>,
+ <0x82000000 0 0xfc700000 0x0 0xfc700000 0 0x1900000>;
clocks = <&clkc CLKID_PCIE_PHY
&clkc CLKID_PCIE_COMB
@@ -120,63 +166,8 @@
status = "disabled";
};
- thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay = <1000>;
- polling-delay-passive = <100>;
- thermal-sensors = <&cpu_temp>;
-
- trips {
- cpu_passive: cpu-passive {
- temperature = <85000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
-
- cpu_hot: cpu-hot {
- temperature = <95000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "hot";
- };
-
- cpu_critical: cpu-critical {
- temperature = <110000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "critical";
- };
- };
- };
-
- ddr_thermal: ddr-thermal {
- polling-delay = <1000>;
- polling-delay-passive = <100>;
- thermal-sensors = <&ddr_temp>;
-
- trips {
- ddr_passive: ddr-passive {
- temperature = <85000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
-
- ddr_critical: ddr-critical {
- temperature = <110000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "critical";
- };
- };
-
- cooling-maps {
- map {
- trip = <&ddr_passive>;
- cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
- };
- };
-
ethmac: ethernet@ff3f0000 {
- compatible = "amlogic,meson-axg-dwmac",
+ compatible = "amlogic,meson-g12a-dwmac",
"snps,dwmac-3.70a",
"snps,dwmac";
reg = <0x0 0xff3f0000 0x0 0x10000>,
@@ -185,8 +176,10 @@
interrupt-names = "macirq";
clocks = <&clkc CLKID_ETH>,
<&clkc CLKID_FCLK_DIV2>,
- <&clkc CLKID_MPLL2>;
- clock-names = "stmmaceth", "clkin0", "clkin1";
+ <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "stmmaceth", "clkin0", "clkin1",
+ "timing-adjustment";
rx-fifo-depth = <4096>;
tx-fifo-depth = <2048>;
status = "disabled";
@@ -247,9 +240,22 @@
hwrng: rng@218 {
compatible = "amlogic,meson-rng";
reg = <0x0 0x218 0x0 0x4>;
+ clocks = <&clkc CLKID_RNG0>;
+ clock-names = "core";
};
};
+ acodec: audio-controller@32000 {
+ compatible = "amlogic,t9015";
+ reg = <0x0 0x32000 0x0 0x14>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "ACODEC";
+ clocks = <&clkc CLKID_AUDIO_CODEC>;
+ clock-names = "pclk";
+ resets = <&reset RESET_AUDIO_CODEC>;
+ status = "disabled";
+ };
+
periphs: bus@34400 {
compatible = "simple-bus";
reg = <0x0 0x34400 0x0 0x400>;
@@ -295,17 +301,9 @@
};
};
- emmc_pins: emmc {
+ emmc_ctrl_pins: emmc-ctrl {
mux-0 {
- groups = "emmc_nand_d0",
- "emmc_nand_d1",
- "emmc_nand_d2",
- "emmc_nand_d3",
- "emmc_nand_d4",
- "emmc_nand_d5",
- "emmc_nand_d6",
- "emmc_nand_d7",
- "emmc_cmd";
+ groups = "emmc_cmd";
function = "emmc";
bias-pull-up;
drive-strength-microamp = <4000>;
@@ -319,6 +317,34 @@
};
};
+ emmc_data_4b_pins: emmc-data-4b {
+ mux-0 {
+ groups = "emmc_nand_d0",
+ "emmc_nand_d1",
+ "emmc_nand_d2",
+ "emmc_nand_d3";
+ function = "emmc";
+ bias-pull-up;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ emmc_data_8b_pins: emmc-data-8b {
+ mux-0 {
+ groups = "emmc_nand_d0",
+ "emmc_nand_d1",
+ "emmc_nand_d2",
+ "emmc_nand_d3",
+ "emmc_nand_d4",
+ "emmc_nand_d5",
+ "emmc_nand_d6",
+ "emmc_nand_d7";
+ function = "emmc";
+ bias-pull-up;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
emmc_ds_pins: emmc-ds {
mux {
groups = "emmc_nand_ds";
@@ -573,6 +599,17 @@
};
};
+ nor_pins: nor {
+ mux {
+ groups = "nor_d",
+ "nor_q",
+ "nor_c",
+ "nor_cs";
+ function = "nor";
+ bias-disable;
+ };
+ };
+
pdm_din0_a_pins: pdm-din0-a {
mux {
groups = "pdm_din0_a";
@@ -809,6 +846,22 @@
};
};
+ pwm_f_z_pins: pwm-f-z {
+ mux {
+ groups = "pwm_f_z";
+ function = "pwm_f";
+ bias-disable;
+ };
+ };
+
+ pwm_f_a_pins: pwm-f-a {
+ mux {
+ groups = "pwm_f_a";
+ function = "pwm_f";
+ bias-disable;
+ };
+ };
+
pwm_f_x_pins: pwm-f-x {
mux {
groups = "pwm_f_x";
@@ -957,6 +1010,57 @@
};
};
+ spicc0_x_pins: spicc0-x {
+ mux {
+ groups = "spi0_mosi_x",
+ "spi0_miso_x",
+ "spi0_clk_x";
+ function = "spi0";
+ drive-strength-microamp = <4000>;
+ bias-disable;
+ };
+ };
+
+ spicc0_ss0_x_pins: spicc0-ss0-x {
+ mux {
+ groups = "spi0_ss0_x";
+ function = "spi0";
+ drive-strength-microamp = <4000>;
+ bias-disable;
+ };
+ };
+
+ spicc0_c_pins: spicc0-c {
+ mux {
+ groups = "spi0_mosi_c",
+ "spi0_miso_c",
+ "spi0_ss0_c",
+ "spi0_clk_c";
+ function = "spi0";
+ drive-strength-microamp = <4000>;
+ bias-disable;
+ };
+ };
+
+ spicc1_pins: spicc1 {
+ mux {
+ groups = "spi1_mosi",
+ "spi1_miso",
+ "spi1_clk";
+ function = "spi1";
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ spicc1_ss0_pins: spicc1-ss0 {
+ mux {
+ groups = "spi1_ss0";
+ function = "spi1";
+ drive-strength-microamp = <4000>;
+ bias-disable;
+ };
+ };
+
tdm_a_din0_pins: tdm-a-din0 {
mux {
groups = "tdm_a_din0";
@@ -1468,15 +1572,20 @@
dmc: bus@38000 {
compatible = "simple-bus";
- reg = <0x0 0x38000 0x0 0x400>;
#address-cells = <2>;
#size-cells = <2>;
- ranges = <0x0 0x0 0x0 0x38000 0x0 0x400>;
+ ranges = <0x0 0x0 0x0 0x38000 0x0 0x2000>;
canvas: video-lut@48 {
compatible = "amlogic,canvas";
reg = <0x0 0x48 0x0 0x14>;
};
+
+ pmu: pmu@80 {
+ reg = <0x0 0x80 0x0 0x40>,
+ <0x0 0xc00 0x0 0x40>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>;
+ };
};
usb2_phy1: phy@3a000 {
@@ -1591,7 +1700,7 @@
#address-cells = <1>;
#size-cells = <0>;
- internal_ephy: ethernet_phy@8 {
+ internal_ephy: ethernet-phy@8 {
compatible = "ethernet-phy-id0180.3301",
"ethernet-phy-ieee802.3-c22";
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -1625,7 +1734,7 @@
clock-names = "xtal", "mpeg-clk";
};
- ao_pinctrl: pinctrl@14 {
+ ao_pinctrl: pinctrl {
compatible = "amlogic,meson-g12a-aobus-pinctrl";
#address-cells = <2>;
#size-cells = <2>;
@@ -1800,6 +1909,33 @@
};
};
+ uart_ao_b_2_3_pins: uart-ao-b-2-3 {
+ mux {
+ groups = "uart_ao_b_tx_2",
+ "uart_ao_b_rx_3";
+ function = "uart_ao_b";
+ bias-disable;
+ };
+ };
+
+ uart_ao_b_8_9_pins: uart-ao-b-8-9 {
+ mux {
+ groups = "uart_ao_b_tx_8",
+ "uart_ao_b_rx_9";
+ function = "uart_ao_b";
+ bias-disable;
+ };
+ };
+
+ uart_ao_b_cts_rts_pins: uart-ao-b-cts-rts {
+ mux {
+ groups = "uart_ao_b_cts",
+ "uart_ao_b_rts";
+ function = "uart_ao_b";
+ bias-disable;
+ };
+ };
+
pwm_a_e_pins: pwm-a-e {
mux {
groups = "pwm_a_e";
@@ -1873,7 +2009,7 @@
};
};
- vrtc: rtc@0a8 {
+ vrtc: rtc@a8 {
compatible = "amlogic,meson-vrtc";
reg = <0x0 0x000a8 0x0 0x4>;
};
@@ -1910,7 +2046,8 @@
};
uart_AO: serial@3000 {
- compatible = "amlogic,meson-gx-uart",
+ compatible = "amlogic,meson-g12a-uart",
+ "amlogic,meson-gx-uart",
"amlogic,meson-ao-uart";
reg = <0x0 0x3000 0x0 0x18>;
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
@@ -1920,7 +2057,8 @@
};
uart_AO_B: serial@4000 {
- compatible = "amlogic,meson-gx-uart",
+ compatible = "amlogic,meson-g12a-uart",
+ "amlogic,meson-gx-uart",
"amlogic,meson-ao-uart";
reg = <0x0 0x4000 0x0 0x18>;
interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
@@ -2051,6 +2189,45 @@
amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
};
+ watchdog: watchdog@f0d0 {
+ compatible = "amlogic,meson-gxbb-wdt";
+ reg = <0x0 0xf0d0 0x0 0x10>;
+ clocks = <&xtal>;
+ };
+
+ spicc0: spi@13000 {
+ compatible = "amlogic,meson-g12a-spicc";
+ reg = <0x0 0x13000 0x0 0x44>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLKID_SPICC0>,
+ <&clkc CLKID_SPICC0_SCLK>;
+ clock-names = "core", "pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spicc1: spi@15000 {
+ compatible = "amlogic,meson-g12a-spicc";
+ reg = <0x0 0x15000 0x0 0x44>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLKID_SPICC1>,
+ <&clkc CLKID_SPICC1_SCLK>;
+ clock-names = "core", "pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spifc: spi@14000 {
+ compatible = "amlogic,meson-gxbb-spifc";
+ status = "disabled";
+ reg = <0x0 0x14000 0x0 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc CLKID_CLK81>;
+ };
+
pwm_ef: pwm@19000 {
compatible = "amlogic,meson-g12a-ee-pwm";
reg = <0x0 0x19000 0x0 0x20>;
@@ -2118,7 +2295,8 @@
};
uart_C: serial@22000 {
- compatible = "amlogic,meson-gx-uart";
+ compatible = "amlogic,meson-g12a-uart",
+ "amlogic,meson-gx-uart";
reg = <0x0 0x22000 0x0 0x18>;
interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
@@ -2127,7 +2305,8 @@
};
uart_B: serial@23000 {
- compatible = "amlogic,meson-gx-uart";
+ compatible = "amlogic,meson-g12a-uart",
+ "amlogic,meson-gx-uart";
reg = <0x0 0x23000 0x0 0x18>;
interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
@@ -2136,19 +2315,21 @@
};
uart_A: serial@24000 {
- compatible = "amlogic,meson-gx-uart";
+ compatible = "amlogic,meson-g12a-uart",
+ "amlogic,meson-gx-uart";
reg = <0x0 0x24000 0x0 0x18>;
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
status = "disabled";
+ fifo-size = <128>;
};
};
- sd_emmc_a: sd@ffe03000 {
+ sd_emmc_a: mmc@ffe03000 {
compatible = "amlogic,meson-axg-mmc";
reg = <0x0 0xffe03000 0x0 0x800>;
- interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
clocks = <&clkc CLKID_SD_EMMC_A>,
<&clkc CLKID_SD_EMMC_A_CLK0>,
@@ -2157,10 +2338,10 @@
resets = <&reset RESET_SD_EMMC_A>;
};
- sd_emmc_b: sd@ffe05000 {
+ sd_emmc_b: mmc@ffe05000 {
compatible = "amlogic,meson-axg-mmc";
reg = <0x0 0xffe05000 0x0 0x800>;
- interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
clocks = <&clkc CLKID_SD_EMMC_B>,
<&clkc CLKID_SD_EMMC_B_CLK0>,
@@ -2172,7 +2353,7 @@
sd_emmc_c: mmc@ffe07000 {
compatible = "amlogic,meson-axg-mmc";
reg = <0x0 0xffe07000 0x0 0x800>;
- interrupts = <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
clocks = <&clkc CLKID_SD_EMMC_C>,
<&clkc CLKID_SD_EMMC_C_CLK0>,
@@ -2204,7 +2385,7 @@
reg = <0x0 0xff400000 0x0 0x40000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
- clock-names = "ddr";
+ clock-names = "otg";
phys = <&usb2_phy1>;
phy-names = "usb2-phy";
dr_mode = "peripheral";
@@ -2219,7 +2400,8 @@
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
snps,dis_u2_susphy_quirk;
- snps,quirk-frame-length-adjustment;
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,parkmode-disable-ss-quirk;
};
};
@@ -2233,25 +2415,66 @@
interrupt-names = "job", "mmu", "gpu";
clocks = <&clkc CLKID_MALI>;
resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>;
-
- /*
- * Mali clocking is provided by two identical clock paths
- * MALI_0 and MALI_1 muxed to a single clock by a glitch
- * free mux to safely change frequency while running.
- */
- assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
- <&clkc CLKID_MALI_0>,
- <&clkc CLKID_MALI>; /* Glitch free mux */
- assigned-clock-parents = <&clkc CLKID_FCLK_DIV2P5>,
- <0>, /* Do Nothing */
- <&clkc CLKID_MALI_0>;
- assigned-clock-rates = <0>, /* Do Nothing */
- <800000000>,
- <0>; /* Do Nothing */
+ operating-points-v2 = <&gpu_opp_table>;
#cooling-cells = <2>;
};
};
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <100>;
+ thermal-sensors = <&cpu_temp>;
+
+ trips {
+ cpu_passive: cpu-passive {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+
+ cpu_hot: cpu-hot {
+ temperature = <95000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "hot";
+ };
+
+ cpu_critical: cpu-critical {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+ };
+
+ ddr_thermal: ddr-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <100>;
+ thermal-sensors = <&ddr_temp>;
+
+ trips {
+ ddr_passive: ddr-passive {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+
+ ddr_critical: ddr-critical {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map {
+ trip = <&ddr_passive>;
+ cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
@@ -2272,4 +2495,14 @@
#clock-cells = <0>;
};
+ npu: npu@ff100000 {
+ compatible = "vivante,gc";
+ reg = <0x0 0xff100000 0x0 0x20000>;
+ interrupts = <0 147 4>;
+ clocks = <&clkc CLKID_NNA_CORE_CLK>,
+ <&clkc CLKID_NNA_AXI_CLK>;
+ clock-names = "core", "bus";
+ resets = <&reset RESET_NNA>;
+ status = "disabled";
+ };
};