summaryrefslogtreecommitdiffstats
path: root/dts/src/arm64/amlogic/meson-g12-common.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm64/amlogic/meson-g12-common.dtsi')
-rw-r--r--dts/src/arm64/amlogic/meson-g12-common.dtsi210
1 files changed, 140 insertions, 70 deletions
diff --git a/dts/src/arm64/amlogic/meson-g12-common.dtsi b/dts/src/arm64/amlogic/meson-g12-common.dtsi
index 00c6f53290..ff68b911b7 100644
--- a/dts/src/arm64/amlogic/meson-g12-common.dtsi
+++ b/dts/src/arm64/amlogic/meson-g12-common.dtsi
@@ -9,6 +9,7 @@
#include <dt-bindings/clock/g12a-aoclkc.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h>
#include <dt-bindings/reset/amlogic,meson-g12a-reset.h>
#include <dt-bindings/thermal/thermal.h>
@@ -58,7 +59,7 @@
secure-monitor = <&sm>;
};
- gpu_opp_table: gpu-opp-table {
+ gpu_opp_table: opp-table-gpu {
compatible = "operating-points-v2";
opp-124999998 {
@@ -107,6 +108,12 @@
no-map;
};
+ /* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+ secmon_reserved_bl32: secmon@5300000 {
+ reg = <0x0 0x05300000 0x0 0x2000000>;
+ no-map;
+ };
+
linux,cma {
compatible = "shared-dma-pool";
reusable;
@@ -159,61 +166,6 @@
status = "disabled";
};
- thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay = <1000>;
- polling-delay-passive = <100>;
- thermal-sensors = <&cpu_temp>;
-
- trips {
- cpu_passive: cpu-passive {
- temperature = <85000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
-
- cpu_hot: cpu-hot {
- temperature = <95000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "hot";
- };
-
- cpu_critical: cpu-critical {
- temperature = <110000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "critical";
- };
- };
- };
-
- ddr_thermal: ddr-thermal {
- polling-delay = <1000>;
- polling-delay-passive = <100>;
- thermal-sensors = <&ddr_temp>;
-
- trips {
- ddr_passive: ddr-passive {
- temperature = <85000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
-
- ddr_critical: ddr-critical {
- temperature = <110000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "critical";
- };
- };
-
- cooling-maps {
- map {
- trip = <&ddr_passive>;
- cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
- };
- };
-
ethmac: ethernet@ff3f0000 {
compatible = "amlogic,meson-g12a-dwmac",
"snps,dwmac-3.70a",
@@ -894,6 +846,22 @@
};
};
+ pwm_f_z_pins: pwm-f-z {
+ mux {
+ groups = "pwm_f_z";
+ function = "pwm_f";
+ bias-disable;
+ };
+ };
+
+ pwm_f_a_pins: pwm-f-a {
+ mux {
+ groups = "pwm_f_a";
+ function = "pwm_f";
+ bias-disable;
+ };
+ };
+
pwm_f_x_pins: pwm-f-x {
mux {
groups = "pwm_f_x";
@@ -1604,15 +1572,20 @@
dmc: bus@38000 {
compatible = "simple-bus";
- reg = <0x0 0x38000 0x0 0x400>;
#address-cells = <2>;
#size-cells = <2>;
- ranges = <0x0 0x0 0x0 0x38000 0x0 0x400>;
+ ranges = <0x0 0x0 0x0 0x38000 0x0 0x2000>;
canvas: video-lut@48 {
compatible = "amlogic,canvas";
reg = <0x0 0x48 0x0 0x14>;
};
+
+ pmu: pmu@80 {
+ reg = <0x0 0x80 0x0 0x40>,
+ <0x0 0xc00 0x0 0x40>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>;
+ };
};
usb2_phy1: phy@3a000 {
@@ -1727,7 +1700,7 @@
#address-cells = <1>;
#size-cells = <0>;
- internal_ephy: ethernet_phy@8 {
+ internal_ephy: ethernet-phy@8 {
compatible = "ethernet-phy-id0180.3301",
"ethernet-phy-ieee802.3-c22";
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
@@ -1761,7 +1734,7 @@
clock-names = "xtal", "mpeg-clk";
};
- ao_pinctrl: pinctrl@14 {
+ ao_pinctrl: pinctrl {
compatible = "amlogic,meson-g12a-aobus-pinctrl";
#address-cells = <2>;
#size-cells = <2>;
@@ -1936,6 +1909,33 @@
};
};
+ uart_ao_b_2_3_pins: uart-ao-b-2-3 {
+ mux {
+ groups = "uart_ao_b_tx_2",
+ "uart_ao_b_rx_3";
+ function = "uart_ao_b";
+ bias-disable;
+ };
+ };
+
+ uart_ao_b_8_9_pins: uart-ao-b-8-9 {
+ mux {
+ groups = "uart_ao_b_tx_8",
+ "uart_ao_b_rx_9";
+ function = "uart_ao_b";
+ bias-disable;
+ };
+ };
+
+ uart_ao_b_cts_rts_pins: uart-ao-b-cts-rts {
+ mux {
+ groups = "uart_ao_b_cts",
+ "uart_ao_b_rts";
+ function = "uart_ao_b";
+ bias-disable;
+ };
+ };
+
pwm_a_e_pins: pwm-a-e {
mux {
groups = "pwm_a_e";
@@ -2046,7 +2046,8 @@
};
uart_AO: serial@3000 {
- compatible = "amlogic,meson-gx-uart",
+ compatible = "amlogic,meson-g12a-uart",
+ "amlogic,meson-gx-uart",
"amlogic,meson-ao-uart";
reg = <0x0 0x3000 0x0 0x18>;
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
@@ -2056,7 +2057,8 @@
};
uart_AO_B: serial@4000 {
- compatible = "amlogic,meson-gx-uart",
+ compatible = "amlogic,meson-g12a-uart",
+ "amlogic,meson-gx-uart",
"amlogic,meson-ao-uart";
reg = <0x0 0x4000 0x0 0x18>;
interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
@@ -2293,7 +2295,8 @@
};
uart_C: serial@22000 {
- compatible = "amlogic,meson-gx-uart";
+ compatible = "amlogic,meson-g12a-uart",
+ "amlogic,meson-gx-uart";
reg = <0x0 0x22000 0x0 0x18>;
interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
@@ -2302,7 +2305,8 @@
};
uart_B: serial@23000 {
- compatible = "amlogic,meson-gx-uart";
+ compatible = "amlogic,meson-g12a-uart",
+ "amlogic,meson-gx-uart";
reg = <0x0 0x23000 0x0 0x18>;
interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
@@ -2311,7 +2315,8 @@
};
uart_A: serial@24000 {
- compatible = "amlogic,meson-gx-uart";
+ compatible = "amlogic,meson-g12a-uart",
+ "amlogic,meson-gx-uart";
reg = <0x0 0x24000 0x0 0x18>;
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
@@ -2321,10 +2326,10 @@
};
};
- sd_emmc_a: sd@ffe03000 {
+ sd_emmc_a: mmc@ffe03000 {
compatible = "amlogic,meson-axg-mmc";
reg = <0x0 0xffe03000 0x0 0x800>;
- interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
clocks = <&clkc CLKID_SD_EMMC_A>,
<&clkc CLKID_SD_EMMC_A_CLK0>,
@@ -2333,10 +2338,10 @@
resets = <&reset RESET_SD_EMMC_A>;
};
- sd_emmc_b: sd@ffe05000 {
+ sd_emmc_b: mmc@ffe05000 {
compatible = "amlogic,meson-axg-mmc";
reg = <0x0 0xffe05000 0x0 0x800>;
- interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
clocks = <&clkc CLKID_SD_EMMC_B>,
<&clkc CLKID_SD_EMMC_B_CLK0>,
@@ -2348,7 +2353,7 @@
sd_emmc_c: mmc@ffe07000 {
compatible = "amlogic,meson-axg-mmc";
reg = <0x0 0xffe07000 0x0 0x800>;
- interrupts = <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
clocks = <&clkc CLKID_SD_EMMC_C>,
<&clkc CLKID_SD_EMMC_C_CLK0>,
@@ -2415,6 +2420,61 @@
};
};
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <100>;
+ thermal-sensors = <&cpu_temp>;
+
+ trips {
+ cpu_passive: cpu-passive {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+
+ cpu_hot: cpu-hot {
+ temperature = <95000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "hot";
+ };
+
+ cpu_critical: cpu-critical {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+ };
+
+ ddr_thermal: ddr-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <100>;
+ thermal-sensors = <&ddr_temp>;
+
+ trips {
+ ddr_passive: ddr-passive {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+
+ ddr_critical: ddr-critical {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map {
+ trip = <&ddr_passive>;
+ cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
@@ -2435,4 +2495,14 @@
#clock-cells = <0>;
};
+ npu: npu@ff100000 {
+ compatible = "vivante,gc";
+ reg = <0x0 0xff100000 0x0 0x20000>;
+ interrupts = <0 147 4>;
+ clocks = <&clkc CLKID_NNA_CORE_CLK>,
+ <&clkc CLKID_NNA_AXI_CLK>;
+ clock-names = "core", "bus";
+ resets = <&reset RESET_NNA>;
+ status = "disabled";
+ };
};
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-19 06:53:56 +0000