diff options
Diffstat (limited to 'dts/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi')
| -rw-r--r-- | dts/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi | 106 |
1 files changed, 86 insertions, 20 deletions
diff --git a/dts/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi b/dts/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi index ad4d50bd9d..43b11e3dfe 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi +++ b/dts/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi @@ -28,10 +28,10 @@ }; }; - usb_vbus: regulator-usb0-vbus { + usb_pwr: regulator-usb-pwrs { compatible = "regulator-fixed"; - regulator-name = "USB0_VBUS"; + regulator-name = "USB_PWR"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -40,20 +40,34 @@ enable-active-high; }; - vcc_3v3: regulator-vcc_3v3 { + vddio_boot: regulator-vddio_boot { compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - vcc_1v8: regulator-vcc_1v8 { + vddio_ao18: regulator-vddio_ao18 { compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; + regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + emmc_pwrseq: emmc-pwrseq { compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; @@ -66,15 +80,32 @@ pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>, - <&gpio GPIOX_20 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; clocks = <&wifi32k>; clock-names = "ext_clock"; }; }; +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + ðmac { status = "okay"; pinctrl-0 = <ð_rgmii_pins>; @@ -85,10 +116,6 @@ amlogic,tx-delay-ns = <2>; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -97,10 +124,30 @@ eth_phy0: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_15 */ + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; }; }; }; +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + &ir { status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; @@ -115,10 +162,15 @@ clock-names = "clkin0"; }; +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + /* Wireless SDIO Module */ &sd_emmc_a { status = "okay"; - pinctrl-0 = <&sdio_pins &sdio_irq_pins>; + pinctrl-0 = <&sdio_pins>; pinctrl-1 = <&sdio_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; #address-cells = <1>; @@ -126,15 +178,15 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; mmc-pwrseq = <&sdio_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vcc_1v8>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; brcmf: wifi@1 { reg = <1>; @@ -151,12 +203,13 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vcc_3v3>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vcc_3v3>; }; /* eMMC */ @@ -176,9 +229,22 @@ mmc-pwrseq = <&emmc_pwrseq>; vmmc-supply = <&vcc_3v3>; - vmmcq-sumpply = <&vcc_1v8>; + vqmmc-supply = <&vddio_boot>; +}; + +/* This is connected to the Bluetooth module: */ +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>; + }; }; +/* This UART is brought out to the DB9 connector */ &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; @@ -187,7 +253,7 @@ &usb0_phy { status = "okay"; - phy-supply = <&usb_vbus>; + phy-supply = <&usb_pwr>; }; &usb1_phy { |