1 files changed, 17 insertions, 28 deletions

diff --git a/dts/src/arm64/amlogic/meson-sm1-sei610.dts b/dts/src/arm64/amlogic/meson-sm1-sei610.dts
index dfb2438851..109932068d 100644
--- a/dts/src/arm64/amlogic/meson-sm1-sei610.dts
+++ b/dts/src/arm64/amlogic/meson-sm1-sei610.dts
@@ -32,7 +32,6 @@
 		compatible = "dmic-codec";
 		num-channels = <2>;
 		wakeup-delay-ms = <50>;
-		status = "okay";
 		sound-name-prefix = "MIC";
 	};
 
@@ -48,45 +47,45 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		key1 {
+		key-1 {
 			label = "A";
 			linux,code = <BTN_0>;
 			gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>;
 			interrupt-parent = <&gpio_intc>;
-			interrupts = <34 IRQ_TYPE_EDGE_BOTH>;
+			interrupts = <IRQID_GPIOH_6 IRQ_TYPE_EDGE_BOTH>;
 		};
 
-		key2 {
+		key-2 {
 			label = "B";
 			linux,code = <BTN_1>;
 			gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
 			interrupt-parent = <&gpio_intc>;
-			interrupts = <35 IRQ_TYPE_EDGE_BOTH>;
+			interrupts = <IRQID_GPIOH_7 IRQ_TYPE_EDGE_BOTH>;
 		};
 
-		key3 {
+		key-3 {
 			label = "C";
 			linux,code = <BTN_2>;
 			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
 			interrupt-parent = <&gpio_intc>;
-			interrupts = <2 IRQ_TYPE_EDGE_BOTH>;
+			interrupts = <IRQID_GPIOAO_2 IRQ_TYPE_EDGE_BOTH>;
 		};
 
-		mic_mute {
+		key-mic-mute {
 			label = "MicMute";
 			linux,code = <SW_MUTE_DEVICE>;
 			linux,input-type = <EV_SW>;
 			gpios = <&gpio_ao GPIOE_2 GPIO_ACTIVE_LOW>;
 			interrupt-parent = <&gpio_intc>;
-			interrupts = <99 IRQ_TYPE_EDGE_BOTH>;
+			interrupts = <IRQID_GPIOE_2 IRQ_TYPE_EDGE_BOTH>;
 		};
 
-		power_key {
+		key-power {
 			label = "PowerKey";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
 			interrupt-parent = <&gpio_intc>;
-			interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+			interrupts = <IRQID_GPIOAO_3 IRQ_TYPE_EDGE_BOTH>;
 		};
 	};
 
@@ -101,20 +100,20 @@
 		};
 	};
 
-	leds {
+	led-controller-1 {
 		compatible = "gpio-leds";
 
-		bluetooth {
+		led-1 {
 			label = "sei610:blue:bt";
 			gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
 			default-state = "off";
 		};
 	};
 
-	pwmleds {
+	led-controller-2 {
 		compatible = "pwm-leds";
 
-		power {
+		led-2 {
 			label = "sei610:red:power";
 			pwms = <&pwm_AO_ab 0 30518 0>;
 			max-brightness = <255>;
@@ -171,7 +170,6 @@
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vddao_3v3>;
 		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
-		enable-active-low;
 		regulator-always-on;
 	};
 
@@ -185,7 +183,7 @@
 		regulator-min-microvolt = <690000>;
 		regulator-max-microvolt = <1050000>;
 
-		vin-supply = <&dc_in>;
+		pwm-supply = <&dc_in>;
 
 		pwms = <&pwm_AO_cd 1 1500 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -203,14 +201,6 @@
 		regulator-always-on;
 	};
 
-	reserved-memory {
-		/* TEE Reserved Memory */
-		bl32_reserved: bl32@5000000 {
-			reg = <0x0 0x05300000 0x0 0x2000000>;
-			no-map;
-		};
-	};
-
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
@@ -220,7 +210,7 @@
 
 	sound {
 		compatible = "amlogic,axg-sound-card";
-		model = "SM1-SEI610";
+		model = "SEI610";
 		audio-aux-devs = <&tdmout_a>, <&tdmout_b>,
 				 <&tdmin_a>, <&tdmin_b>;
 		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
@@ -256,7 +246,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&frddr_a>;
@@ -592,7 +581,7 @@
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
 		interrupt-parent = <&gpio_intc>;
-		interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <IRQID_GPIOX_18 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "host-wakeup";
 		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
 		max-speed = <2000000>;