diff options
Diffstat (limited to 'dts/src/arm64/amlogic')
93 files changed, 7709 insertions, 1560 deletions
diff --git a/dts/src/arm64/amlogic/amlogic-c3-c302x-aw409.dts b/dts/src/arm64/amlogic/amlogic-c3-c302x-aw409.dts new file mode 100644 index 0000000000..edce8850b3 --- /dev/null +++ b/dts/src/arm64/amlogic/amlogic-c3-c302x-aw409.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "amlogic-c3.dtsi" + +/ { + model = "Amlogic C302 aw409 Development Board"; + compatible = "amlogic,aw409", "amlogic,c3"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart_b; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x10000000>; + }; +}; + +&uart_b { + status = "okay"; +}; diff --git a/dts/src/arm64/amlogic/amlogic-c3.dtsi b/dts/src/arm64/amlogic/amlogic-c3.dtsi new file mode 100644 index 0000000000..32a754fe79 --- /dev/null +++ b/dts/src/arm64/amlogic/amlogic-c3.dtsi @@ -0,0 +1,135 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/reset/amlogic,c3-reset.h> + +/ { + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x1>; + enable-method = "psci"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; + + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + + pwrc: power-controller { + compatible = "amlogic,c3-pwrc"; + #power-domain-cells = <1>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@fff01000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xfff01000 0 0x1000>, + <0x0 0xfff02000 0 0x2000>, + <0x0 0xfff04000 0 0x2000>, + <0x0 0xfff06000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + apb4: bus@fe000000 { + compatible = "simple-bus"; + reg = <0x0 0xfe000000 0x0 0x480000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + + reset: reset-controller@2000 { + compatible = "amlogic,c3-reset"; + reg = <0x0 0x2000 0x0 0x98>; + #reset-cells = <1>; + }; + + watchdog@2100 { + compatible = "amlogic,c3-wdt", "amlogic,t7-wdt"; + reg = <0x0 0x2100 0x0 0x10>; + clocks = <&xtal>; + }; + + periphs_pinctrl: pinctrl@4000 { + compatible = "amlogic,c3-periphs-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio: bank@4000 { + reg = <0x0 0x4000 0x0 0x004c>, + <0x0 0x4100 0x0 0x01de>; + reg-names = "mux", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 0 55>; + }; + }; + + gpio_intc: interrupt-controller@4080 { + compatible = "amlogic,meson-gpio-intc", + "amlogic,c3-gpio-intc"; + reg = <0x0 0x4080 0x0 0x0020>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = + <10 11 12 13 14 15 16 17 18 19 20 21>; + }; + + uart_b: serial@7a000 { + compatible = "amlogic,meson-s4-uart", + "amlogic,meson-ao-uart"; + reg = <0x0 0x7a000 0x0 0x18>; + interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&xtal>, <&xtal>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + }; + + }; + }; +}; diff --git a/dts/src/arm64/amlogic/amlogic-t7-a311d2-an400.dts b/dts/src/arm64/amlogic/amlogic-t7-a311d2-an400.dts new file mode 100644 index 0000000000..c05edebb90 --- /dev/null +++ b/dts/src/arm64/amlogic/amlogic-t7-a311d2-an400.dts @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Amlogic, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "amlogic-t7.dtsi" + +/ { + model = "Amlogic A311D2 AN400 Development Board"; + compatible = "amlogic,an400", "amlogic,a311d2", "amlogic,t7"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart_a; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0xE0000000 + 0x00000001 0x00000000 0x00000000 0x20000000>; + }; + + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; +}; + +&uart_a { + clocks = <&xtal>, <&xtal>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "okay"; +}; diff --git a/dts/src/arm64/amlogic/amlogic-t7-a311d2-khadas-vim4.dts b/dts/src/arm64/amlogic/amlogic-t7-a311d2-khadas-vim4.dts new file mode 100644 index 0000000000..fffdab96b1 --- /dev/null +++ b/dts/src/arm64/amlogic/amlogic-t7-a311d2-khadas-vim4.dts @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Wesion, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "amlogic-t7.dtsi" + +/ { + model = "Khadas vim4"; + compatible = "khadas,vim4", "amlogic,a311d2", "amlogic,t7"; + + aliases { + serial0 = &uart_a; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x2 0x0>; /* 8 GB */ + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 3 MiB reserved for ARM Trusted Firmware (BL31) */ + secmon_reserved: secmon@5000000 { + reg = <0x0 0x05000000 0x0 0x300000>; + no-map; + }; + + /* 32 MiB reserved for ARM Trusted Firmware (BL32) */ + secmon_reserved_bl32: secmon@5300000 { + reg = <0x0 0x05300000 0x0 0x2000000>; + no-map; + }; + }; + + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; + +}; + +&uart_a { + status = "okay"; + clocks = <&xtal>, <&xtal>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; +}; diff --git a/dts/src/arm64/amlogic/amlogic-t7.dtsi b/dts/src/arm64/amlogic/amlogic-t7.dtsi new file mode 100644 index 0000000000..5248bdf824 --- /dev/null +++ b/dts/src/arm64/amlogic/amlogic-t7.dtsi @@ -0,0 +1,193 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/amlogic,t7-pwrc.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <0x2>; + #size-cells = <0x0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu100>; + }; + core1 { + cpu = <&cpu101>; + }; + core2 { + cpu = <&cpu102>; + }; + core3 { + cpu = <&cpu103>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + }; + + cpu100: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x100>; + enable-method = "psci"; + }; + + cpu101: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x101>; + enable-method = "psci"; + }; + + cpu102: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x102>; + enable-method = "psci"; + }; + + cpu103: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x103>; + enable-method = "psci"; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0 0x1>; + enable-method = "psci"; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0 0x2>; + enable-method = "psci"; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0 0x3>; + enable-method = "psci"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + + pwrc: power-controller { + compatible = "amlogic,t7-pwrc"; + #power-domain-cells = <1>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@fff01000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xfff01000 0 0x1000>, + <0x0 0xfff02000 0 0x0100>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + apb4: bus@fe000000 { + compatible = "simple-bus"; + reg = <0x0 0xfe000000 0x0 0x480000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + + watchdog@2100 { + compatible = "amlogic,t7-wdt"; + reg = <0x0 0x2100 0x0 0x10>; + clocks = <&xtal>; + }; + + periphs_pinctrl: pinctrl@4000 { + compatible = "amlogic,t7-periphs-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio: bank@4000 { + reg = <0x0 0x4000 0x0 0x0064>, + <0x0 0x40c0 0x0 0x0220>; + reg-names = "mux", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 0 157>; + }; + }; + + gpio_intc: interrupt-controller@4080 { + compatible = "amlogic,t7-gpio-intc", + "amlogic,meson-gpio-intc"; + reg = <0x0 0x4080 0x0 0x20>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = + <10 11 12 13 14 15 16 17 18 19 20 21>; + }; + + uart_a: serial@78000 { + compatible = "amlogic,t7-uart", "amlogic,meson-s4-uart"; + reg = <0x0 0x78000 0x0 0x18>; + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + }; + + }; +}; diff --git a/dts/src/arm64/amlogic/meson-a1-ad402.dts b/dts/src/arm64/amlogic/meson-a1-ad402.dts new file mode 100644 index 0000000000..4bc30af058 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-a1-ad402.dts @@ -0,0 +1,147 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 SberDevices + * Author: Dmitry Rokosov <ddrokosov@sberdevices.ru> + */ + +/dts-v1/; + +#include "meson-a1.dtsi" + +/ { + compatible = "amlogic,ad402", "amlogic,a1"; + model = "Amlogic Meson A1 AD402 Development Board"; + + aliases { + serial0 = &uart_AO_B; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x8000000>; + }; + + reserved-memory { + /* 3 MiB reserved for Amlogic Trust OS (BL32) */ + secos_reserved: secos@3d00000 { + reg = <0x0 0x03d00000 0x0 0x300000>; + no-map; + }; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + battery_4v2: regulator-battery-4v2 { + compatible = "regulator-fixed"; + regulator-name = "4V2"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + }; + + vddq_1v35: regulator-vddq-1v35 { + compatible = "regulator-fixed"; + regulator-name = "VDDQ_1V35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + vin-supply = <&battery_4v2>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&battery_4v2>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddio_1v8: regulator-vddio-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; +}; + +/* Bluetooth HCI H4 */ +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; +}; + +&uart_AO_B { + status = "okay"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_1v8>; +}; + +&spifc { + status = "okay"; + pinctrl-0 = <&spifc_pins>; + pinctrl-names = "default"; + + flash@0 { + compatible = "spi-nand"; + status = "okay"; + reg = <0>; + spi-max-frequency = <96000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; +}; + +&usb2_phy1 { + phy-supply = <&vcc_3v3>; +}; + +&usb { + status = "okay"; + dr_mode = "peripheral"; +}; + +&sd_emmc { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr104; + max-frequency = <200000000>; + non-removable; + disable-wp; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_1v8>; +}; diff --git a/dts/src/arm64/amlogic/meson-a1.dtsi b/dts/src/arm64/amlogic/meson-a1.dtsi index b4000cf65a..c03e207ea6 100644 --- a/dts/src/arm64/amlogic/meson-a1.dtsi +++ b/dts/src/arm64/amlogic/meson-a1.dtsi @@ -3,9 +3,13 @@ * Copyright (c) 2019 Amlogic, Inc. All rights reserved. */ -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/amlogic,a1-pll-clkc.h> +#include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h> #include <dt-bindings/gpio/meson-a1-gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/power/meson-a1-power.h> +#include <dt-bindings/reset/amlogic,meson-a1-reset.h> / { compatible = "amlogic,a1"; @@ -36,9 +40,20 @@ l2: l2-cache0 { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; + efuse: efuse { + compatible = "amlogic,meson-gxbb-efuse"; + clocks = <&clkc_periphs CLKID_OTP>; + #address-cells = <1>; + #size-cells = <1>; + secure-monitor = <&sm>; + power-domains = <&pwrc PWRC_OTP_ID>; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -64,7 +79,6 @@ pwrc: power-controller { compatible = "amlogic,meson-a1-pwrc"; #power-domain-cells = <1>; - status = "okay"; }; }; @@ -74,6 +88,16 @@ #size-cells = <2>; ranges; + spifc: spi@fd000400 { + compatible = "amlogic,a1-spifc"; + reg = <0x0 0xfd000400 0x0 0x290>; + clocks = <&clkc_periphs CLKID_SPIFC>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&pwrc PWRC_SPIFC_ID>; + status = "disabled"; + }; + apb: bus@fe000000 { compatible = "simple-bus"; reg = <0x0 0xfe000000 0x0 0x1000000>; @@ -81,7 +105,6 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>; - reset: reset-controller@0 { compatible = "amlogic,meson-a1-reset"; reg = <0x0 0x0 0x0 0x8c>; @@ -103,10 +126,200 @@ gpio-ranges = <&periphs_pinctrl 0 0 62>; }; + i2c0_f11_pins: i2c0-f11 { + mux { + groups = "i2c0_sck_f11", + "i2c0_sda_f12"; + function = "i2c0"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_f9_pins: i2c0-f9 { + mux { + groups = "i2c0_sck_f9", + "i2c0_sda_f10"; + function = "i2c0"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_x_pins: i2c1-x { + mux { + groups = "i2c1_sck_x", + "i2c1_sda_x"; + function = "i2c1"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_a_pins: i2c1-a { + mux { + groups = "i2c1_sck_a", + "i2c1_sda_a"; + function = "i2c1"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_x0_pins: i2c2-x0 { + mux { + groups = "i2c2_sck_x0", + "i2c2_sda_x1"; + function = "i2c2"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_x15_pins: i2c2-x15 { + mux { + groups = "i2c2_sck_x15", + "i2c2_sda_x16"; + function = "i2c2"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_a4_pins: i2c2-a4 { + mux { + groups = "i2c2_sck_a4", + "i2c2_sda_a5"; + function = "i2c2"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_a8_pins: i2c2-a8 { + mux { + groups = "i2c2_sck_a8", + "i2c2_sda_a9"; + function = "i2c2"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_x_pins: i2c3-x { + mux { + groups = "i2c3_sck_x", + "i2c3_sda_x"; + function = "i2c3"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_f_pins: i2c3-f { + mux { + groups = "i2c3_sck_f", + "i2c3_sda_f"; + function = "i2c3"; + bias-pull-up; + drive-strength-microamp = <3000>; + }; + }; + + uart_a_pins: uart-a { + mux { + groups = "uart_a_tx", + "uart_a_rx"; + function = "uart_a"; + }; + }; + + uart_a_cts_rts_pins: uart-a-cts-rts { + mux { + groups = "uart_a_cts", + "uart_a_rts"; + function = "uart_a"; + bias-pull-down; + }; + }; + + sdio_pins: sdio { + mux0 { + groups = "sdcard_d0_x", + "sdcard_d1_x", + "sdcard_d2_x", + "sdcard_d3_x", + "sdcard_cmd_x"; + function = "sdcard"; + bias-pull-up; + }; + + mux1 { + groups = "sdcard_clk_x"; + function = "sdcard"; + bias-disable; + }; + }; + + sdio_clk_gate_pins: sdio-clk-gate { + mux { + groups = "sdcard_clk_x"; + function = "sdcard"; + bias-pull-down; + }; + }; + + spifc_pins: spifc { + mux { + groups = "spif_mo", + "spif_mi", + "spif_clk", + "spif_cs", + "spif_hold_n", + "spif_wp_n"; + function = "spif"; + }; + }; + }; + + gpio_intc: interrupt-controller@440 { + compatible = "amlogic,meson-a1-gpio-intc", + "amlogic,meson-gpio-intc"; + reg = <0x0 0x0440 0x0 0x14>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = + <49 50 51 52 53 54 55 56>; + }; + + clkc_periphs: clock-controller@800 { + compatible = "amlogic,a1-peripherals-clkc"; + reg = <0 0x800 0 0x104>; + #clock-cells = <1>; + clocks = <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_FCLK_DIV3>, + <&clkc_pll CLKID_FCLK_DIV5>, + <&clkc_pll CLKID_FCLK_DIV7>, + <&clkc_pll CLKID_HIFI_PLL>, + <&xtal>; + clock-names = "fclk_div2", "fclk_div3", + "fclk_div5", "fclk_div7", + "hifi_pll", "xtal"; + }; + + i2c0: i2c@1400 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1400 0x0 0x20>; + interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_I2C_M_A>; + power-domains = <&pwrc PWRC_I2C_ID>; }; uart_AO: serial@1c00 { - compatible = "amlogic,meson-gx-uart", + compatible = "amlogic,meson-a1-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x1c00 0x0 0x18>; interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; @@ -116,7 +329,7 @@ }; uart_AO_B: serial@2000 { - compatible = "amlogic,meson-gx-uart", + compatible = "amlogic,meson-a1-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x2000 0x0 0x18>; interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; @@ -124,6 +337,152 @@ clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; + + saradc: adc@2c00 { + compatible = "amlogic,meson-g12a-saradc", + "amlogic,meson-saradc"; + reg = <0x0 0x2c00 0x0 0x48>; + #io-channel-cells = <1>; + power-domains = <&pwrc PWRC_I2C_ID>; + interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, + <&clkc_periphs CLKID_SARADC_EN>, + <&clkc_periphs CLKID_SARADC>, + <&clkc_periphs CLKID_SARADC_SEL>; + clock-names = "clkin", "core", + "adc_clk", "adc_sel"; + status = "disabled"; + }; + + i2c1: i2c@5c00 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x5c00 0x0 0x20>; + interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_I2C_M_B>; + power-domains = <&pwrc PWRC_I2C_ID>; + }; + + i2c2: i2c@6800 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x6800 0x0 0x20>; + interrupts = <GIC_SPI 76 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_I2C_M_C>; + power-domains = <&pwrc PWRC_I2C_ID>; + }; + + i2c3: i2c@6c00 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x6c00 0x0 0x20>; + interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_I2C_M_D>; + power-domains = <&pwrc PWRC_I2C_ID>; + }; + + usb2_phy1: phy@4000 { + compatible = "amlogic,a1-usb2-phy"; + clocks = <&clkc_periphs CLKID_USB_PHY_IN>; + clock-names = "xtal"; + reg = <0x0 0x4000 0x0 0x60>; + resets = <&reset RESET_USBPHY>; + reset-names = "phy"; + #phy-cells = <0>; + power-domains = <&pwrc PWRC_USB_ID>; + }; + + hwrng: rng@5118 { + compatible = "amlogic,meson-rng"; + reg = <0x0 0x5118 0x0 0x4>; + power-domains = <&pwrc PWRC_OTP_ID>; + }; + + sec_AO: ao-secure@5a20 { + compatible = "amlogic,meson-gx-ao-secure", "syscon"; + reg = <0x0 0x5a20 0x0 0x140>; + amlogic,has-chip-id; + }; + + clkc_pll: pll-clock-controller@7c80 { + compatible = "amlogic,a1-pll-clkc"; + reg = <0 0x7c80 0 0x18c>; + #clock-cells = <1>; + clocks = <&clkc_periphs CLKID_FIXPLL_IN>, + <&clkc_periphs CLKID_HIFIPLL_IN>; + clock-names = "fixpll_in", "hifipll_in"; + }; + + sd_emmc: sd@10000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0x10000 0x0 0x800>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc_periphs CLKID_SD_EMMC_A>, + <&clkc_periphs CLKID_SD_EMMC>, + <&clkc_pll CLKID_FCLK_DIV2>; + clock-names = "core", + "clkin0", + "clkin1"; + assigned-clocks = <&clkc_periphs CLKID_SD_EMMC_SEL2>; + assigned-clock-parents = <&xtal>; + resets = <&reset RESET_SD_EMMC_A>; + power-domains = <&pwrc PWRC_SD_EMMC_ID>; + status = "disabled"; + }; + }; + + usb: usb@fe004400 { + status = "disabled"; + compatible = "amlogic,meson-a1-usb-ctrl"; + reg = <0x0 0xfe004400 0x0 0xa0>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&clkc_periphs CLKID_USB_CTRL>, + <&clkc_periphs CLKID_USB_BUS>, + <&clkc_periphs CLKID_USB_CTRL_IN>; + clock-names = "usb_ctrl", "usb_bus", "xtal_usb_ctrl"; + assigned-clocks = <&clkc_periphs CLKID_USB_BUS>; + assigned-clock-rates = <64000000>; + resets = <&reset RESET_USBCTRL>; + reset-name = "usb_ctrl"; + + dr_mode = "otg"; + + phys = <&usb2_phy1>; + phy-names = "usb2-phy1"; + + dwc3: usb@ff400000 { + compatible = "snps,dwc3"; + reg = <0x0 0xff400000 0x0 0x100000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,dis_u2_susphy_quirk; + snps,quirk-frame-length-adjustment = <0x20>; + snps,parkmode-disable-ss-quirk; + }; + + dwc2: usb@ff500000 { + compatible = "amlogic,meson-a1-usb", "snps,dwc2"; + reg = <0x0 0xff500000 0x0 0x40000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_phy1>; + phy-names = "usb2-phy"; + clocks = <&clkc_periphs CLKID_USB_PHY>; + clock-names = "otg"; + dr_mode = "peripheral"; + g-rx-fifo-size = <192>; + g-np-tx-fifo-size = <128>; + g-tx-fifo-size = <128 128 16 16 16>; + }; }; gic: interrupt-controller@ff901000 { diff --git a/dts/src/arm64/amlogic/meson-axg-jethome-jethub-j100.dts b/dts/src/arm64/amlogic/meson-axg-jethome-jethub-j100.dts index 8b0d586aa8..b2d6ba6609 100644 --- a/dts/src/arm64/amlogic/meson-axg-jethome-jethub-j100.dts +++ b/dts/src/arm64/amlogic/meson-axg-jethome-jethub-j100.dts @@ -1,270 +1,29 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Copyright (c) 2021 Vyacheslav Bocharov <adeep@lexina.in> - * Copyright (c) 2020 JetHome - * Author: Aleksandr Kazantsev <ak@tvip.ru> - * Author: Alexey Shevelkin <ash@tvip.ru> + * Copyright (c) 2022 Vyacheslav Bocharov <adeep@lexina.in> + * Copyright (c) 2022 JetHome * Author: Vyacheslav Bocharov <adeep@lexina.in> */ /dts-v1/; -#include "meson-axg.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/thermal/thermal.h> +#include "meson-axg-jethome-jethub-j1xx.dtsi" / { compatible = "jethome,jethub-j100", "amlogic,a113d", "amlogic,meson-axg"; - model = "JetHome JetHub J100"; - aliases { - serial0 = &uart_AO; /* Console */ - serial2 = &uart_AO_B; /* External UART (Wireless Module) */ - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; + model = "JetHome JetHub D1 (J100)"; /* 1024MB RAM */ memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x40000000>; }; - - reserved-memory { - linux,cma { - size = <0x0 0x400000>; - }; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vcc_5v: regulator-vcc_5v { - compatible = "regulator-fixed"; - regulator-name = "VCC5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_5v>; - regulator-always-on; - }; - - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddio_boot: regulator-vddio_boot { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_BOOT"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vccq_1v8: regulator-vccq_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCCQ_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - usb_pwr: regulator-usb_pwr { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - regulator-always-on; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */ - }; - - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&scpi_sensors 0>; - trips { - cpu_passive: cpu-passive { - temperature = <70000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - - cpu_hot: cpu-hot { - temperature = <80000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "hot"; - }; - - cpu_critical: cpu-critical { - temperature = <100000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; - }; - - cpu_cooling_maps: cooling-maps { - map0 { - trip = <&cpu_passive>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - - map1 { - trip = <&cpu_hot>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - }; - - onewire { - compatible = "w1-gpio"; - gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>; - #gpio-cells = <1>; - }; -}; - -&efuse { - sn: sn@32 { - reg = <0x32 0x20>; - }; - - eth_mac: eth_mac@0 { - reg = <0x0 0x6>; - }; - - bt_mac: bt_mac@6 { - reg = <0x6 0x6>; - }; - - wifi_mac: wifi_mac@c { - reg = <0xc 0x6>; - }; - - bid: bid@12 { - reg = <0x12 0x20>; - }; -}; - -ðmac { - status = "okay"; - pinctrl-0 = <ð_rmii_x_pins>; - pinctrl-names = "default"; - phy-handle = <ð_phy0>; - phy-mode = "rmii"; - - mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - /* ICPlus IP101A/G Ethernet PHY (vendor_id=0x0243, model_id=0x0c54) */ - eth_phy0: ethernet-phy@0 { - /* compatible = "ethernet-phy-id0243.0c54";*/ - max-speed = <100>; - reg = <0>; - - reset-assert-us = <10000>; - reset-deassert-us = <10000>; - reset-gpios = <&gpio GPIOZ_5 GPIO_ACTIVE_LOW>; - }; - }; -}; - -/* Internal I2C bus (on CPU module) */ -&i2c1 { - status = "okay"; - pinctrl-0 = <&i2c1_z_pins>; - pinctrl-names = "default"; - - /* RTC */ - pcf8563: pcf8563@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - status = "okay"; - }; }; -/* Peripheral I2C bus (on motherboard) */ -&i2c_AO { - status = "okay"; - pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>; - pinctrl-names = "default"; -}; - -&pwm_ab { - status = "okay"; - pinctrl-0 = <&pwm_a_x20_pins>; - pinctrl-names = "default"; -}; /* wifi module */ &sd_emmc_b { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; non-removable; - disable-wp; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_boot>; brcmf: wifi@1 { reg = <1>; @@ -272,99 +31,10 @@ }; }; -/* emmc storage */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - max-frequency = <200000000>; - non-removable; - disable-wp; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - - mmc-pwrseq = <&emmc_pwrseq>; - - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vccq_1v8>; -}; - /* UART Bluetooth */ &uart_B { - status = "okay"; - pinctrl-0 = <&uart_b_z_pins>, <&uart_b_z_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - bluetooth { compatible = "brcm,bcm43438-bt"; shutdown-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>; }; }; - -/* UART Console */ -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -/* UART Wireless module */ -&uart_AO_B { - status = "okay"; - pinctrl-0 = <&uart_ao_b_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - phy-supply = <&usb_pwr>; -}; - -&spicc1 { - status = "okay"; - pinctrl-0 = <&spi1_x_pins>, <&spi1_ss0_x_pins>; - pinctrl-names = "default"; -}; - -&gpio { - gpio-line-names = - "", "", "", "", "", // 0 - 4 - "", "", "", "", "", // 5 - 9 - "UserButton", "", "", "", "", // 10 - 14 - "", "", "", "", "", // 15 - 19 - "", "", "", "", "", // 20 - 24 - "", "LedRed", "LedGreen", "Output3", "Output2", // 25 - 29 - "Output1", "", "", "", "", // 30 - 34 - "", "ZigBeeBOOT", "", "", "", // 35 - 39 - "1Wire", "ZigBeeRESET", "", "Input4", "Input3", // 40 - 44 - "Input2", "Input1", "", "", "", // 45 - 49 - "", "", "", "", "", // 50 - 54 - "", "", "", "", "", // 55 - 59 - "", "", "", "", "", // 60 - 64 - "", "", "", "", "", // 65 - 69 - "", "", "", "", "", // 70 - 74 - "", "", "", "", "", // 75 - 79 - "", "", "", "", "", // 80 - 84 - "", ""; // 85-86 -}; - -&cpu0 { - #cooling-cells = <2>; -}; - -&cpu1 { - #cooling-cells = <2>; -}; - -&cpu2 { - #cooling-cells = <2>; -}; - -&cpu3 { - #cooling-cells = <2>; -}; diff --git a/dts/src/arm64/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts b/dts/src/arm64/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts new file mode 100644 index 0000000000..8a18ce9484 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts @@ -0,0 +1,49 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Vyacheslav Bocharov <adeep@lexina.in> + * Copyright (c) 2022 JetHome + * Author: Vyacheslav Bocharov <adeep@lexina.in> + */ + +/dts-v1/; + +#include "meson-axg-jethome-jethub-j1xx.dtsi" + +/ { + compatible = "jethome,jethub-j110", "amlogic,a113d", "amlogic,meson-axg"; + model = "JetHome JetHub D1p (J110) HW rev.2"; + + /* 2GiB or 4GiB RAM */ + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + + +/* wifi module */ +&sd_emmc_b { + broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/ +}; + +/* UART Bluetooth */ +&uart_B { + bluetooth { + compatible = "realtek,rtl8822cs-bt"; + enable-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio GPIOZ_8 GPIO_ACTIVE_HIGH>; + device-wake-gpios = <&gpio GPIOZ_6 GPIO_ACTIVE_HIGH>; + }; +}; + +&i2c_AO { + /* EEPROM on base board */ + eeprompd: eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + pagesize = <0x20>; + label = "eeprompd"; + address-width = <0x10>; + vcc-supply = <&vddao_3v3>; + }; +}; diff --git a/dts/src/arm64/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts b/dts/src/arm64/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts new file mode 100644 index 0000000000..c356bd2cc6 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Vyacheslav Bocharov <adeep@lexina.in> + * Copyright (c) 2022 JetHome + * Author: Vyacheslav Bocharov <adeep@lexina.in> + */ + +/dts-v1/; + +#include "meson-axg-jethome-jethub-j1xx.dtsi" + +/ { + compatible = "jethome,jethub-j110", "amlogic,a113d", "amlogic,meson-axg"; + model = "JetHome JetHub D1p (J110) Hw rev.3"; + + /* 2GiB or 4GiB RAM */ + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + + +/* wifi module */ +&sd_emmc_b { + broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/ +}; + +&i2c_AO { + /* EEPROM on base board */ + eeprompd: eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + pagesize = <0x20>; + label = "eeprompd"; + address-width = <0x10>; + vcc-supply = <&vddao_3v3>; + }; +}; diff --git a/dts/src/arm64/amlogic/meson-axg-jethome-jethub-j1xx.dtsi b/dts/src/arm64/amlogic/meson-axg-jethome-jethub-j1xx.dtsi new file mode 100644 index 0000000000..9b65ae818e --- /dev/null +++ b/dts/src/arm64/amlogic/meson-axg-jethome-jethub-j1xx.dtsi @@ -0,0 +1,334 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Vyacheslav Bocharov <adeep@lexina.in> + * Copyright (c) 2022 JetHome + * Author: Vyacheslav Bocharov <adeep@lexina.in> + * Author: Aleksandr Kazantsev <ak@tvip.ru> + * Author: Alexey Shevelkin <ash@tvip.ru> + */ + +/dts-v1/; + +#include "meson-axg.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + aliases { + serial0 = &uart_AO; /* Console */ + serial2 = &uart_AO_B; /* External UART (Wireless Module) */ + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + linux,cma { + size = <0x0 0x400000>; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vcc_5v: regulator-vcc-5v { + compatible = "regulator-fixed"; + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_5v>; + regulator-always-on; + }; + + vddio_ao18: regulator-vddio-ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddio_boot: regulator-vddio-boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vccq_1v8: regulator-vccq-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCCQ_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + usb_pwr: regulator-usb-pwr { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + regulator-always-on; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */ + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&scpi_sensors 0>; + trips { + cpu_passive: cpu-passive { + temperature = <70000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + cpu_hot: cpu-hot { + temperature = <80000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "hot"; + }; + + cpu_critical: cpu-critical { + temperature = <100000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cpu_cooling_maps: cooling-maps { + map0 { + trip = <&cpu_passive>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&cpu_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + onewire { + compatible = "w1-gpio"; + gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>; + }; +}; + +&efuse { + sn: sn@32 { + reg = <0x32 0x20>; + }; + + eth_mac: eth-mac@0 { + reg = <0x0 0x6>; + }; + + bt_mac: bt-mac@6 { + reg = <0x6 0x6>; + }; + + wifi_mac: wifi-mac@c { + reg = <0xc 0x6>; + }; + + bid: bid@12 { + reg = <0x12 0x20>; + }; +}; + +ðmac { + status = "okay"; + pinctrl-0 = <ð_rmii_x_pins>; + pinctrl-names = "default"; + phy-handle = <ð_phy0>; + phy-mode = "rmii"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + /* ICPlus IP101A/G Ethernet PHY (vendor_id=0x0243, model_id=0x0c54) */ + eth_phy0: ethernet-phy@0 { + /* compatible = "ethernet-phy-id0243.0c54";*/ + max-speed = <100>; + reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + reset-gpios = <&gpio GPIOZ_5 GPIO_ACTIVE_LOW>; + }; + }; +}; + +/* Internal I2C bus (on CPU module) */ +&i2c1 { + status = "okay"; + pinctrl-0 = <&i2c1_z_pins>; + pinctrl-names = "default"; + + /* RTC */ + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + status = "okay"; + }; +}; + +/* Peripheral I2C bus (on motherboard) */ +&i2c_AO { + status = "okay"; + pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>; + pinctrl-names = "default"; +}; + +&pwm_ab { + status = "okay"; + pinctrl-0 = <&pwm_a_x20_pins>; + pinctrl-names = "default"; +}; + +/* wifi module */ +&sd_emmc_b { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* emmc storage */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vccq_1v8>; +}; + +/* UART Bluetooth */ +&uart_B { + status = "okay"; + pinctrl-0 = <&uart_b_z_pins>, <&uart_b_z_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; +}; + +/* UART Console */ +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +/* UART Wireless module */ +&uart_AO_B { + status = "okay"; + pinctrl-0 = <&uart_ao_b_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + vbus-supply = <&usb_pwr>; +}; + +&spicc1 { + status = "okay"; + pinctrl-0 = <&spi1_x_pins>, <&spi1_ss0_x_pins>; + pinctrl-names = "default"; +}; + +&gpio { + gpio-line-names = + "", "", "", "", "", // 0 - 4 + "", "", "", "", "", // 5 - 9 + "UserButton", "", "", "", "", // 10 - 14 + "", "", "", "", "", // 15 - 19 + "", "", "", "", "", // 20 - 24 + "", "LedRed", "LedGreen", "Output3", "Output2", // 25 - 29 + "Output1", "", "", "", "", // 30 - 34 + "", "ZigBeeBOOT", "", "", "", // 35 - 39 + "1Wire", "ZigBeeRESET", "", "Input4", "Input3", // 40 - 44 + "Input2", "Input1", "", "", "", // 45 - 49 + "", "", "", "", "", // 50 - 54 + "", "", "", "", "", // 55 - 59 + "", "", "", "", "", // 60 - 64 + "", "", "", "", "", // 65 - 69 + "", "", "", "", "", // 70 - 74 + "", "", "", "", "", // 75 - 79 + "", "", "", "", "", // 80 - 84 + "", ""; // 85-86 +}; diff --git a/dts/src/arm64/amlogic/meson-axg-s400.dts b/dts/src/arm64/amlogic/meson-axg-s400.dts index 359589d1df..7ed526f451 100644 --- a/dts/src/arm64/amlogic/meson-axg-s400.dts +++ b/dts/src/arm64/amlogic/meson-axg-s400.dts @@ -12,7 +12,7 @@ compatible = "amlogic,s400", "amlogic,a113d", "amlogic,meson-axg"; model = "Amlogic Meson AXG S400 Development Board"; - adc_keys { + keys { compatible = "adc-keys"; io-channels = <&saradc 0>; io-channel-names = "buttons"; @@ -66,7 +66,6 @@ VDDA-supply = <&vcc_3v3>; VDDP-supply = <&vcc_3v3>; VDDD-supply = <&vcc_3v3>; - status = "okay"; sound-name-prefix = "Linein"; }; @@ -75,14 +74,12 @@ compatible = "everest,es7154"; VDD-supply = <&vcc_3v3>; PVDD-supply = <&vcc_5v>; - status = "okay"; sound-name-prefix = "Lineout"; }; spdif_dit: audio-codec-2 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; @@ -91,14 +88,12 @@ compatible = "dmic-codec"; num-channels = <7>; wakeup-delay-ms = <50>; - status = "okay"; sound-name-prefix = "MIC"; }; spdif_dir: audio-codec-4 { #sound-dai-cells = <0>; compatible = "linux,spdif-dir"; - status = "okay"; sound-name-prefix = "DIR"; }; @@ -116,7 +111,7 @@ reg = <0x0 0x0 0x0 0x40000000>; }; - main_12v: regulator-main_12v { + main_12v: regulator-main-12v { compatible = "regulator-fixed"; regulator-name = "12V"; regulator-min-microvolt = <12000000>; @@ -124,7 +119,7 @@ regulator-always-on; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; @@ -133,7 +128,7 @@ regulator-always-on; }; - vcc_5v: regulator-vcc_5v { + vcc_5v: regulator-vcc-5v { compatible = "regulator-fixed"; regulator-name = "VCC5V"; regulator-min-microvolt = <5000000>; @@ -144,7 +139,7 @@ enable-active-high; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; @@ -153,7 +148,7 @@ regulator-always-on; }; - vddio_ao18: regulator-vddio_ao18 { + vddio_ao18: regulator-vddio-ao18 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; @@ -162,7 +157,7 @@ regulator-always-on; }; - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; @@ -171,7 +166,7 @@ regulator-always-on; }; - usb_pwr: regulator-usb_pwr { + usb_pwr: regulator-usb-pwr { compatible = "regulator-fixed"; regulator-name = "USB_PWR"; regulator-min-microvolt = <5000000>; @@ -280,7 +275,6 @@ assigned-clock-rates = <589824000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&frddr_a>; diff --git a/dts/src/arm64/amlogic/meson-axg.dtsi b/dts/src/arm64/amlogic/meson-axg.dtsi index 04f797b5a0..6d12b760b9 100644 --- a/dts/src/arm64/amlogic/meson-axg.dtsi +++ b/dts/src/arm64/amlogic/meson-axg.dtsi @@ -74,6 +74,8 @@ enable-method = "psci"; next-level-cache = <&l2>; clocks = <&scpi_dvfs 0>; + dynamic-power-coefficient = <140>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -83,6 +85,8 @@ enable-method = "psci"; next-level-cache = <&l2>; clocks = <&scpi_dvfs 0>; + dynamic-power-coefficient = <140>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -92,6 +96,8 @@ enable-method = "psci"; next-level-cache = <&l2>; clocks = <&scpi_dvfs 0>; + dynamic-power-coefficient = <140>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -101,10 +107,14 @@ enable-method = "psci"; next-level-cache = <&l2>; clocks = <&scpi_dvfs 0>; + dynamic-power-coefficient = <140>; + #cooling-cells = <2>; }; l2: l2-cache0 { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; @@ -152,7 +162,7 @@ scpi_clocks: clocks { compatible = "arm,scpi-clocks"; - scpi_dvfs: clock-controller { + scpi_dvfs: clocks-0 { compatible = "arm,scpi-dvfs-clocks"; #clock-cells = <1>; clock-indices = <0>; @@ -161,7 +171,7 @@ }; scpi_sensors: sensors { - compatible = "amlogic,meson-gxbb-scpi-sensors"; + compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors"; #thermal-sensor-cells = <1>; }; }; @@ -430,6 +440,27 @@ }; }; + nand_all_pins: nand-all-pins { + mux { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7", + "nand_ce0", + "nand_ale", + "nand_cle", + "nand_wen_clk", + "nand_ren_wr"; + function = "nand"; + input-enable; + bias-pull-up; + }; + }; + emmc_ds_pins: emmc_ds { mux { groups = "emmc_ds"; @@ -1882,10 +1913,10 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>; - sd_emmc_b: sd@5000 { + sd_emmc_b: mmc@5000 { compatible = "amlogic,meson-axg-mmc"; reg = <0x0 0x5000 0x0 0x800>; - interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_B>, <&clkc CLKID_SD_EMMC_B_CLK0>, @@ -1897,7 +1928,7 @@ sd_emmc_c: mmc@7000 { compatible = "amlogic,meson-axg-mmc"; reg = <0x0 0x7000 0x0 0x800>; - interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_C>, <&clkc CLKID_SD_EMMC_C_CLK0>, @@ -1906,6 +1937,21 @@ resets = <&reset RESET_SD_EMMC_C>; }; + nfc: nand-controller@7800 { + compatible = "amlogic,meson-axg-nfc"; + reg = <0x0 0x7800 0x0 0x100>, + <0x0 0x7000 0x0 0x800>; + reg-names = "nfc", "emmc"; + pinctrl-0 = <&nand_all_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_SD_EMMC_C>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "device"; + }; + usb2_phy1: phy@9020 { compatible = "amlogic,meson-gxl-usb2-phy"; #phy-cells = <0>; diff --git a/dts/src/arm64/amlogic/meson-g12-common.dtsi b/dts/src/arm64/amlogic/meson-g12-common.dtsi index 45947c1031..9d5eab6595 100644 --- a/dts/src/arm64/amlogic/meson-g12-common.dtsi +++ b/dts/src/arm64/amlogic/meson-g12-common.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/clock/g12a-aoclkc.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h> #include <dt-bindings/reset/amlogic,meson-g12a-reset.h> #include <dt-bindings/thermal/thermal.h> @@ -1571,15 +1572,20 @@ dmc: bus@38000 { compatible = "simple-bus"; - reg = <0x0 0x38000 0x0 0x400>; #address-cells = <2>; #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x38000 0x0 0x400>; + ranges = <0x0 0x0 0x0 0x38000 0x0 0x2000>; canvas: video-lut@48 { compatible = "amlogic,canvas"; reg = <0x0 0x48 0x0 0x14>; }; + + pmu: pmu@80 { + reg = <0x0 0x80 0x0 0x40>, + <0x0 0xc00 0x0 0x40>; + interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>; + }; }; usb2_phy1: phy@3a000 { @@ -1694,7 +1700,7 @@ #address-cells = <1>; #size-cells = <0>; - internal_ephy: ethernet_phy@8 { + internal_ephy: ethernet-phy@8 { compatible = "ethernet-phy-id0180.3301", "ethernet-phy-ieee802.3-c22"; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; @@ -1728,7 +1734,7 @@ clock-names = "xtal", "mpeg-clk"; }; - ao_pinctrl: pinctrl@14 { + ao_pinctrl: pinctrl { compatible = "amlogic,meson-g12a-aobus-pinctrl"; #address-cells = <2>; #size-cells = <2>; @@ -2040,7 +2046,8 @@ }; uart_AO: serial@3000 { - compatible = "amlogic,meson-gx-uart", + compatible = "amlogic,meson-g12a-uart", + "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x3000 0x0 0x18>; interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; @@ -2050,7 +2057,8 @@ }; uart_AO_B: serial@4000 { - compatible = "amlogic,meson-gx-uart", + compatible = "amlogic,meson-g12a-uart", + "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x4000 0x0 0x18>; interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; @@ -2287,7 +2295,8 @@ }; uart_C: serial@22000 { - compatible = "amlogic,meson-gx-uart"; + compatible = "amlogic,meson-g12a-uart", + "amlogic,meson-gx-uart"; reg = <0x0 0x22000 0x0 0x18>; interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>; @@ -2296,7 +2305,8 @@ }; uart_B: serial@23000 { - compatible = "amlogic,meson-gx-uart"; + compatible = "amlogic,meson-g12a-uart", + "amlogic,meson-gx-uart"; reg = <0x0 0x23000 0x0 0x18>; interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; @@ -2305,7 +2315,8 @@ }; uart_A: serial@24000 { - compatible = "amlogic,meson-gx-uart"; + compatible = "amlogic,meson-g12a-uart", + "amlogic,meson-gx-uart"; reg = <0x0 0x24000 0x0 0x18>; interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; @@ -2315,10 +2326,10 @@ }; }; - sd_emmc_a: sd@ffe03000 { + sd_emmc_a: mmc@ffe03000 { compatible = "amlogic,meson-axg-mmc"; reg = <0x0 0xffe03000 0x0 0x800>; - interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_A>, <&clkc CLKID_SD_EMMC_A_CLK0>, @@ -2327,10 +2338,10 @@ resets = <&reset RESET_SD_EMMC_A>; }; - sd_emmc_b: sd@ffe05000 { + sd_emmc_b: mmc@ffe05000 { compatible = "amlogic,meson-axg-mmc"; reg = <0x0 0xffe05000 0x0 0x800>; - interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_B>, <&clkc CLKID_SD_EMMC_B_CLK0>, @@ -2342,7 +2353,7 @@ sd_emmc_c: mmc@ffe07000 { compatible = "amlogic,meson-axg-mmc"; reg = <0x0 0xffe07000 0x0 0x800>; - interrupts = <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_C>, <&clkc CLKID_SD_EMMC_C_CLK0>, @@ -2484,4 +2495,17 @@ #clock-cells = <0>; }; + npu: npu@ff100000 { + compatible = "vivante,gc"; + reg = <0x0 0xff100000 0x0 0x20000>; + interrupts = <0 147 4>; + clocks = <&clkc CLKID_NNA_CORE_CLK>, + <&clkc CLKID_NNA_AXI_CLK>; + clock-names = "core", "bus"; + assigned-clocks = <&clkc CLKID_NNA_CORE_CLK>, + <&clkc CLKID_NNA_AXI_CLK>; + assigned-clock-rates = <800000000>, <800000000>; + resets = <&reset RESET_NNA>; + status = "disabled"; + }; }; diff --git a/dts/src/arm64/amlogic/meson-g12.dtsi b/dts/src/arm64/amlogic/meson-g12.dtsi index 6a1f4dcf64..e732df3f31 100644 --- a/dts/src/arm64/amlogic/meson-g12.dtsi +++ b/dts/src/arm64/amlogic/meson-g12.dtsi @@ -15,10 +15,10 @@ compatible = "amlogic,axg-tdm-iface"; #sound-dai-cells = <0>; sound-name-prefix = "TDM_A"; - clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, - <&clkc_audio AUD_CLKID_MST_A_SCLK>, - <&clkc_audio AUD_CLKID_MST_A_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; + clocks = <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>, + <&clkc_audio AUD_CLKID_MST_A_MCLK>; + clock-names = "sclk", "lrclk", "mclk"; status = "disabled"; }; @@ -26,10 +26,10 @@ compatible = "amlogic,axg-tdm-iface"; #sound-dai-cells = <0>; sound-name-prefix = "TDM_B"; - clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, - <&clkc_audio AUD_CLKID_MST_B_SCLK>, - <&clkc_audio AUD_CLKID_MST_B_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; + clocks = <&clkc_audio AUD_CLKID_MST_B_SCLK>, + <&clkc_audio AUD_CLKID_MST_B_LRCLK>, + <&clkc_audio AUD_CLKID_MST_B_MCLK>; + clock-names = "sclk", "lrclk", "mclk"; status = "disabled"; }; @@ -37,10 +37,10 @@ compatible = "amlogic,axg-tdm-iface"; #sound-dai-cells = <0>; sound-name-prefix = "TDM_C"; - clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, - <&clkc_audio AUD_CLKID_MST_C_SCLK>, - <&clkc_audio AUD_CLKID_MST_C_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; + clocks = <&clkc_audio AUD_CLKID_MST_C_SCLK>, + <&clkc_audio AUD_CLKID_MST_C_LRCLK>, + <&clkc_audio AUD_CLKID_MST_C_MCLK>; + clock-names = "sclk", "lrclk", "mclk"; status = "disabled"; }; }; @@ -195,8 +195,7 @@ }; tdmin_a: audio-controller@300 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; + compatible = "amlogic,g12a-tdmin"; reg = <0x0 0x300 0x0 0x40>; sound-name-prefix = "TDMIN_A"; resets = <&clkc_audio AUD_RESET_TDMIN_A>; @@ -211,8 +210,7 @@ }; tdmin_b: audio-controller@340 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; + compatible = "amlogic,g12a-tdmin"; reg = <0x0 0x340 0x0 0x40>; sound-name-prefix = "TDMIN_B"; resets = <&clkc_audio AUD_RESET_TDMIN_B>; @@ -227,8 +225,7 @@ }; tdmin_c: audio-controller@380 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; + compatible = "amlogic,g12a-tdmin"; reg = <0x0 0x380 0x0 0x40>; sound-name-prefix = "TDMIN_C"; resets = <&clkc_audio AUD_RESET_TDMIN_C>; @@ -243,8 +240,7 @@ }; tdmin_lb: audio-controller@3c0 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; + compatible = "amlogic,g12a-tdmin"; reg = <0x0 0x3c0 0x0 0x40>; sound-name-prefix = "TDMIN_LB"; resets = <&clkc_audio AUD_RESET_TDMIN_LB>; @@ -272,12 +268,12 @@ status = "disabled"; }; - spdifout: audio-controller@480 { + spdifout_a: audio-controller@480 { compatible = "amlogic,g12a-spdifout", "amlogic,axg-spdifout"; reg = <0x0 0x480 0x0 0x50>; #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFOUT"; + sound-name-prefix = "SPDIFOUT_A"; clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; clock-names = "pclk", "mclk"; diff --git a/dts/src/arm64/amlogic/meson-g12a-fbx8am-brcm.dtso b/dts/src/arm64/amlogic/meson-g12a-fbx8am-brcm.dtso new file mode 100644 index 0000000000..9591fdc31e --- /dev/null +++ b/dts/src/arm64/amlogic/meson-g12a-fbx8am-brcm.dtso @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2024 Freebox SAS + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> + +&uart_A { + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + vbat-supply = <&vddao_3v3>; + vddio-supply = <&vddio_ao1v8>; + }; +}; + +&sd_emmc_a { + /* Per mmc-controller.yaml */ + #address-cells = <1>; + #size-cells = <0>; + /* NB: may be either AP6398S or AP6398SR3 wifi module */ + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; diff --git a/dts/src/arm64/amlogic/meson-g12a-fbx8am-realtek.dtso b/dts/src/arm64/amlogic/meson-g12a-fbx8am-realtek.dtso new file mode 100644 index 0000000000..55fff35b09 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-g12a-fbx8am-realtek.dtso @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2024 Freebox SAS + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> + +&uart_A { + bluetooth { + compatible = "realtek,rtl8822cs-bt"; + enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>; + device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>; + }; +}; + +&sd_emmc_a { + /* No explicit compatible for rtl8822cs sdio */ +}; diff --git a/dts/src/arm64/amlogic/meson-g12a-fbx8am.dts b/dts/src/arm64/amlogic/meson-g12a-fbx8am.dts new file mode 100644 index 0000000000..af211d8f39 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-g12a-fbx8am.dts @@ -0,0 +1,462 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2024 Freebox SAS + +/* + * SEI codename: SEI530FB (based on SEI510) + * Freebox codename: fbx8am + * Commercial names: Freebox Pop, Player TV Free 4K + */ + +/dts-v1/; + +#include "meson-g12a.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "freebox,fbx8am", "amlogic,g12a"; + model = "Freebox Player Pop"; + chassis-type = "embedded"; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + /* Physical user-accessible reset button near USB port */ + power-button { + label = "Reset"; + linux,code = <BTN_MISC>; + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; + }; + }; + + spdif_dit: audio-codec-2 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + status = "okay"; + sound-name-prefix = "DIT"; + }; + + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + ao_5v: regulator-ao-5v { + compatible = "regulator-fixed"; + regulator-name = "AO_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + dc_in: regulator-dc-in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + emmc_1v8: regulator-emmc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "EMMC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&ao_5v>; + regulator-always-on; + }; + + vddao_3v3_t: regulator-vddao-3v3-t { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3_T"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; + }; + + vddcpu: regulator-vddcpu { + /* + * SY8120B1ABC DC/DC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + pwm-supply = <&ao_5v>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddio_ao1v8: regulator-vddio-ao1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <10>; /* required for 43752 */ + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "fbx8am"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "SPDIFOUT_A IN 0", "FRDDR_A OUT 3", + "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", + "SPDIFOUT_A IN 2", "FRDDR_C OUT 3"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* spdif hdmi or toslink interface */ + dai-link-4 { + sound-dai = <&spdifout_a>; + + codec-0 { + sound-dai = <&spdif_dit>; + }; + + codec-1 { + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>; + }; + }; + + /* spdif hdmi interface */ + dai-link-5 { + sound-dai = <&spdifout_b>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-6 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&clkc_audio { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +ðmac { + status = "okay"; + phy-handle = <&internal_ephy>; + phy-mode = "rmii"; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&spdifout_a { + pinctrl-0 = <&spdif_out_h_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&spdifout_b { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&i2c3 { + status = "okay"; + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; +}; + +&pdm { + pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_din1_z_pins>, + <&pdm_din2_z_pins>, <&pdm_din3_z_pins>, + <&pdm_dclk_z_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao1v8>; +}; + +/* SDIO */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr50; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_ao1v8>; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&emmc_1v8>; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + dr_mode = "host"; +}; diff --git a/dts/src/arm64/amlogic/meson-g12a-radxa-zero.dts b/dts/src/arm64/amlogic/meson-g12a-radxa-zero.dts index e3bb6df42f..15b9bc2807 100644 --- a/dts/src/arm64/amlogic/meson-g12a-radxa-zero.dts +++ b/dts/src/arm64/amlogic/meson-g12a-radxa-zero.dts @@ -60,7 +60,7 @@ clock-names = "ext_clock"; }; - ao_5v: regulator-ao_5v { + ao_5v: regulator-ao-5v { compatible = "regulator-fixed"; regulator-name = "AO_5V"; regulator-min-microvolt = <5000000>; @@ -68,7 +68,7 @@ regulator-always-on; }; - vcc_1v8: regulator-vcc_1v8 { + vcc_1v8: regulator-vcc-1v8 { compatible = "regulator-fixed"; regulator-name = "VCC_1V8"; regulator-min-microvolt = <1800000>; @@ -77,7 +77,7 @@ regulator-always-on; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; @@ -86,7 +86,7 @@ regulator-always-on; }; - hdmi_pw: regulator-hdmi_pw { + hdmi_pw: regulator-hdmi-pw { compatible = "regulator-fixed"; regulator-name = "HDMI_PW"; regulator-min-microvolt = <5000000>; @@ -95,7 +95,7 @@ regulator-always-on; }; - vddao_1v8: regulator-vddao_1v8 { + vddao_1v8: regulator-vddao-1v8 { compatible = "regulator-fixed"; regulator-name = "VDDAO_1V8"; regulator-min-microvolt = <1800000>; @@ -104,7 +104,7 @@ regulator-always-on; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; @@ -145,7 +145,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&frddr_a>; @@ -401,5 +400,4 @@ &usb { status = "okay"; - dr_mode = "host"; }; diff --git a/dts/src/arm64/amlogic/meson-g12a-sei510.dts b/dts/src/arm64/amlogic/meson-g12a-sei510.dts index 4fb31c2ba3..61cb8135a3 100644 --- a/dts/src/arm64/amlogic/meson-g12a-sei510.dts +++ b/dts/src/arm64/amlogic/meson-g12a-sei510.dts @@ -15,7 +15,7 @@ compatible = "seirobotics,sei510", "amlogic,g12a"; model = "SEI Robotics SEI510"; - adc_keys { + keys { compatible = "adc-keys"; io-channels = <&saradc 0>; io-channel-names = "buttons"; @@ -45,7 +45,6 @@ compatible = "dmic-codec"; num-channels = <2>; wakeup-delay-ms = <50>; - status = "okay"; sound-name-prefix = "MIC"; }; @@ -84,7 +83,7 @@ reg = <0x0 0x0 0x0 0x40000000>; }; - ao_5v: regulator-ao_5v { + ao_5v: regulator-ao-5v { compatible = "regulator-fixed"; regulator-name = "AO_5V"; regulator-min-microvolt = <5000000>; @@ -93,7 +92,7 @@ regulator-always-on; }; - dc_in: regulator-dc_in { + dc_in: regulator-dc-in { compatible = "regulator-fixed"; regulator-name = "DC_IN"; regulator-min-microvolt = <5000000>; @@ -101,7 +100,7 @@ regulator-always-on; }; - emmc_1v8: regulator-emmc_1v8 { + emmc_1v8: regulator-emmc-1v8 { compatible = "regulator-fixed"; regulator-name = "EMMC_1V8"; regulator-min-microvolt = <1800000>; @@ -110,7 +109,7 @@ regulator-always-on; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; @@ -119,7 +118,7 @@ regulator-always-on; }; - vddao_3v3_t: regultor-vddao_3v3_t { + vddao_3v3_t: regulator-vddao-3v3-t { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3_T"; regulator-min-microvolt = <3300000>; @@ -148,7 +147,7 @@ regulator-always-on; }; - vddio_ao1v8: regulator-vddio_ao1v8 { + vddio_ao1v8: regulator-vddio-ao1v8 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO1V8"; regulator-min-microvolt = <1800000>; @@ -209,7 +208,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&frddr_a>; diff --git a/dts/src/arm64/amlogic/meson-g12a-u200.dts b/dts/src/arm64/amlogic/meson-g12a-u200.dts index 4b5d11e563..3da7922d83 100644 --- a/dts/src/arm64/amlogic/meson-g12a-u200.dts +++ b/dts/src/arm64/amlogic/meson-g12a-u200.dts @@ -8,6 +8,8 @@ #include "meson-g12a.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> +#include <dt-bindings/sound/meson-g12a-toacodec.h> / { compatible = "amlogic,u200", "amlogic,g12a"; @@ -18,6 +20,26 @@ ethernet0 = ðmac; }; + dioo2133: audio-amplifier-0 { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; + VCC-supply = <&vcc_5v>; + #sound-dai-cells = <0>; + sound-name-prefix = "10U2"; + }; + + spdif_dir: audio-codec-0 { + compatible = "linux,spdif-dir"; + #sound-dai-cells = <0>; + sound-name-prefix = "DIR"; + }; + + spdif_dit: audio-codec-1 { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + sound-name-prefix = "DIT"; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -53,7 +75,7 @@ reg = <0x0 0x0 0x0 0x40000000>; }; - flash_1v8: regulator-flash_1v8 { + flash_1v8: regulator-flash-1v8 { compatible = "regulator-fixed"; regulator-name = "FLASH_1V8"; regulator-min-microvolt = <1800000>; @@ -62,7 +84,7 @@ regulator-always-on; }; - main_12v: regulator-main_12v { + main_12v: regulator-main-12v { compatible = "regulator-fixed"; regulator-name = "12V"; regulator-min-microvolt = <12000000>; @@ -70,7 +92,7 @@ regulator-always-on; }; - usb_pwr_en: regulator-usb_pwr_en { + usb_pwr_en: regulator-usb-pwr-en { compatible = "regulator-fixed"; regulator-name = "USB_PWR_EN"; regulator-min-microvolt = <5000000>; @@ -81,7 +103,7 @@ enable-active-high; }; - vcc_1v8: regulator-vcc_1v8 { + vcc_1v8: regulator-vcc-1v8 { compatible = "regulator-fixed"; regulator-name = "VCC_1V8"; regulator-min-microvolt = <1800000>; @@ -90,7 +112,7 @@ regulator-always-on; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; @@ -100,7 +122,7 @@ /* FIXME: actually controlled by VDDCPU_B_EN */ }; - vcc_5v: regulator-vcc_5v { + vcc_5v: regulator-vcc-5v { compatible = "regulator-fixed"; regulator-name = "VCC_5V"; regulator-min-microvolt = <5000000>; @@ -111,7 +133,7 @@ enable-active-high; }; - vddao_1v8: regulator-vddao_1v8 { + vddao_1v8: regulator-vddao-1v8 { compatible = "regulator-fixed"; regulator-name = "VDDAO_1V8"; regulator-min-microvolt = <1800000>; @@ -120,7 +142,7 @@ regulator-always-on; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; @@ -147,6 +169,216 @@ regulator-boot-on; regulator-always-on; }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "U200"; + audio-widgets = "Line", "Lineout"; + audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmout_c>, + <&tdmin_a>, <&tdmin_b>, <&tdmin_c>, + <&tdmin_lb>, <&dioo2133>; + audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", + "TDMOUT_A IN 1", "FRDDR_B OUT 0", + "TDMOUT_A IN 2", "FRDDR_C OUT 0", + "TDM_A Playback", "TDMOUT_A OUT", + "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "TDMOUT_C IN 0", "FRDDR_A OUT 2", + "TDMOUT_C IN 1", "FRDDR_B OUT 2", + "TDMOUT_C IN 2", "FRDDR_C OUT 2", + "TDM_C Playback", "TDMOUT_C OUT", + "SPDIFOUT_A IN 0", "FRDDR_A OUT 3", + "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", + "SPDIFOUT_A IN 2", "FRDDR_C OUT 3", + "SPDIFOUT_B IN 0", "FRDDR_A OUT 4", + "SPDIFOUT_B IN 1", "FRDDR_B OUT 4", + "SPDIFOUT_B IN 2", "FRDDR_C OUT 4", + "TDMIN_A IN 0", "TDM_A Capture", + "TDMIN_A IN 1", "TDM_B Capture", + "TDMIN_A IN 2", "TDM_C Capture", + "TDMIN_A IN 3", "TDM_A Loopback", + "TDMIN_A IN 4", "TDM_B Loopback", + "TDMIN_A IN 5", "TDM_C Loopback", + "TDMIN_B IN 0", "TDM_A Capture", + "TDMIN_B IN 1", "TDM_B Capture", + "TDMIN_B IN 2", "TDM_C Capture", + "TDMIN_B IN 3", "TDM_A Loopback", + "TDMIN_B IN 4", "TDM_B Loopback", + "TDMIN_B IN 5", "TDM_C Loopback", + "TDMIN_C IN 0", "TDM_A Capture", + "TDMIN_C IN 1", "TDM_B Capture", + "TDMIN_C IN 2", "TDM_C Capture", + "TDMIN_C IN 3", "TDM_A Loopback", + "TDMIN_C IN 4", "TDM_B Loopback", + "TDMIN_C IN 5", "TDM_C Loopback", + "TDMIN_LB IN 3", "TDM_A Capture", + "TDMIN_LB IN 4", "TDM_B Capture", + "TDMIN_LB IN 5", "TDM_C Capture", + "TDMIN_LB IN 0", "TDM_A Loopback", + "TDMIN_LB IN 1", "TDM_B Loopback", + "TDMIN_LB IN 2", "TDM_C Loopback", + "TODDR_A IN 0", "TDMIN_A OUT", + "TODDR_B IN 0", "TDMIN_A OUT", + "TODDR_C IN 0", "TDMIN_A OUT", + "TODDR_A IN 1", "TDMIN_B OUT", + "TODDR_B IN 1", "TDMIN_B OUT", + "TODDR_C IN 1", "TDMIN_B OUT", + "TODDR_A IN 2", "TDMIN_C OUT", + "TODDR_B IN 2", "TDMIN_C OUT", + "TODDR_C IN 2", "TDMIN_C OUT", + "TODDR_A IN 3", "SPDIFIN Capture", + "TODDR_B IN 3", "SPDIFIN Capture", + "TODDR_C IN 3", "SPDIFIN Capture", + "TODDR_A IN 6", "TDMIN_LB OUT", + "TODDR_B IN 6", "TDMIN_LB OUT", + "TODDR_C IN 6", "TDMIN_LB OUT", + "10U2 INL", "ACODEC LOLP", + "10U2 INR", "ACODEC LORP", + "Lineout", "10U2 OUTL", + "Lineout", "10U2 OUTR"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + dai-link-3 { + sound-dai = <&toddr_a>; + }; + + dai-link-4 { + sound-dai = <&toddr_b>; + }; + + dai-link-5 { + sound-dai = <&toddr_c>; + }; + + /* Connected to the WIFI/BT chip */ + dai-link-6 { + sound-dai = <&tdmif_a>; + dai-format = "dsp_a"; + dai-tdm-slot-tx-mask-0 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&toacodec TOACODEC_IN_A>; + }; + + codec-1 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; + }; + }; + + /* Connected to the onboard AD82584F DAC */ + dai-link-7 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&toacodec TOACODEC_IN_B>; + }; + + codec-1 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* 8ch HDMI interface */ + dai-link-8 { + sound-dai = <&tdmif_c>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&toacodec TOACODEC_IN_C>; + }; + + codec-1 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>; + }; + }; + + /* spdif hdmi and coax output */ + dai-link-9 { + sound-dai = <&spdifout_a>; + + codec-0 { + sound-dai = <&spdif_dit>; + }; + + codec-1 { + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>; + }; + }; + + /* spdif hdmi interface */ + dai-link-10 { + sound-dai = <&spdifout_b>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-11 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + + /* internal codec glue */ + dai-link-12 { + sound-dai = <&toacodec TOACODEC_OUT>; + + codec { + sound-dai = <&acodec>; + }; + }; + + /* spdif coax input */ + dai-link-13 { + sound-dai = <&spdifin>; + + codec { + sound-dai = <&spdif_dir>; + }; + }; + }; +}; + +&acodec { + status = "okay"; +}; + +&arb { + status = "okay"; }; &cec_AO { @@ -163,6 +395,10 @@ hdmi-phandle = <&hdmi_tx>; }; +&clkc_audio { + status = "okay"; +}; + &cpu0 { cpu-supply = <&vddcpu>; operating-points-v2 = <&cpu_opp_table>; @@ -191,6 +427,10 @@ clock-latency = <50000>; }; +&clkc_audio { + status = "okay"; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; @@ -203,6 +443,18 @@ phy-mode = "rmii"; }; +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; @@ -288,6 +540,95 @@ vqmmc-supply = <&flash_1v8>; }; +&spdifin { + pinctrl-0 = <&spdif_in_h_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&spdifout_a { + pinctrl-0 = <&spdif_ao_out_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&spdifout_b { + status = "okay"; +}; + +&tdmif_a { + pinctrl-0 = <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>, <&tdm_a_dout0_pins> ; + pinctrl-names = "default"; + status = "okay"; +}; + +&tdmif_b { + pinctrl-0 = <&mclk0_a_pins>, <&tdm_b_fs_pins>, <&tdm_b_sclk_pins>, + <&tdm_b_dout0_pins>; + pinctrl-names = "default"; + status = "okay"; + + assigned-clocks = <&clkc_audio AUD_CLKID_TDM_MCLK_PAD0>, + <&clkc_audio AUD_CLKID_TDM_SCLK_PAD1>, + <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD1>; + assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_B_MCLK>, + <&clkc_audio AUD_CLKID_MST_B_SCLK>, + <&clkc_audio AUD_CLKID_MST_B_LRCLK>; + assigned-clock-rates = <0>, <0>, <0>; +}; + +&tdmif_c { + status = "okay"; +}; + +&tdmin_a { + status = "okay"; +}; + +&tdmin_b { + status = "okay"; +}; + +&tdmin_c { + status = "okay"; +}; + +&tdmin_lb { + status = "okay"; +}; + +&tdmout_a { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tdmout_c { + status = "okay"; +}; + +&toacodec { + status = "okay"; +}; + +&toddr_a { + status = "okay"; +}; + +&toddr_b { + status = "okay"; +}; + +&toddr_c { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; diff --git a/dts/src/arm64/amlogic/meson-g12a-x96-max.dts b/dts/src/arm64/amlogic/meson-g12a-x96-max.dts index b4e86196e3..05c7a1e3f1 100644 --- a/dts/src/arm64/amlogic/meson-g12a-x96-max.dts +++ b/dts/src/arm64/amlogic/meson-g12a-x96-max.dts @@ -22,7 +22,6 @@ spdif_dit: audio-codec-1 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; @@ -67,7 +66,7 @@ clock-names = "ext_clock"; }; - flash_1v8: regulator-flash_1v8 { + flash_1v8: regulator-flash-1v8 { compatible = "regulator-fixed"; regulator-name = "FLASH_1V8"; regulator-min-microvolt = <1800000>; @@ -76,7 +75,7 @@ regulator-always-on; }; - dc_in: regulator-dc_in { + dc_in: regulator-dc-in { compatible = "regulator-fixed"; regulator-name = "DC_IN"; regulator-min-microvolt = <5000000>; @@ -84,7 +83,7 @@ regulator-always-on; }; - vcc_1v8: regulator-vcc_1v8 { + vcc_1v8: regulator-vcc-1v8 { compatible = "regulator-fixed"; regulator-name = "VCC_1V8"; regulator-min-microvolt = <1800000>; @@ -93,7 +92,7 @@ regulator-always-on; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; @@ -103,7 +102,7 @@ /* FIXME: actually controlled by VDDCPU_B_EN */ }; - vcc_5v: regulator-vcc_5v { + vcc_5v: regulator-vcc-5v { compatible = "regulator-fixed"; regulator-name = "VCC_5V"; regulator-min-microvolt = <5000000>; @@ -111,10 +110,9 @@ vin-supply = <&dc_in>; gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-low; }; - vddao_1v8: regulator-vddao_1v8 { + vddao_1v8: regulator-vddao-1v8 { compatible = "regulator-fixed"; regulator-name = "VDDAO_1V8"; regulator-min-microvolt = <1800000>; @@ -123,7 +121,7 @@ regulator-always-on; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; @@ -156,9 +154,9 @@ "TDMOUT_B IN 1", "FRDDR_B OUT 1", "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT", - "SPDIFOUT IN 0", "FRDDR_A OUT 3", - "SPDIFOUT IN 1", "FRDDR_B OUT 3", - "SPDIFOUT IN 2", "FRDDR_C OUT 3"; + "SPDIFOUT_A IN 0", "FRDDR_A OUT 3", + "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", + "SPDIFOUT_A IN 2", "FRDDR_C OUT 3"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, @@ -167,7 +165,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&frddr_a>; @@ -198,7 +195,7 @@ /* spdif hdmi or toslink interface */ dai-link-4 { - sound-dai = <&spdifout>; + sound-dai = <&spdifout_a>; codec-0 { sound-dai = <&spdif_dit>; @@ -345,7 +342,7 @@ interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -458,7 +455,7 @@ vqmmc-supply = <&flash_1v8>; }; -&spdifout { +&spdifout_a { pinctrl-0 = <&spdif_out_h_pins>; pinctrl-names = "default"; status = "okay"; diff --git a/dts/src/arm64/amlogic/meson-g12a.dtsi b/dts/src/arm64/amlogic/meson-g12a.dtsi index fb0ab27d1f..543e70669d 100644 --- a/dts/src/arm64/amlogic/meson-g12a.dtsi +++ b/dts/src/arm64/amlogic/meson-g12a.dtsi @@ -50,6 +50,8 @@ l2: l2-cache0 { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; @@ -57,26 +59,6 @@ compatible = "operating-points-v2"; opp-shared; - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <731000>; - }; - - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <731000>; - }; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <731000>; - }; - - opp-667000000 { - opp-hz = /bits/ 64 <666666666>; - opp-microvolt = <731000>; - }; - opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <731000>; @@ -133,3 +115,7 @@ }; }; }; + +&pmu { + compatible = "amlogic,g12a-ddr-pmu"; +}; diff --git a/dts/src/arm64/amlogic/meson-g12b-a311d-bananapi-m2s.dts b/dts/src/arm64/amlogic/meson-g12b-a311d-bananapi-m2s.dts new file mode 100644 index 0000000000..ac6f7ae1d1 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-g12b-a311d-bananapi-m2s.dts @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-g12b-a311d.dtsi" +#include "meson-g12b-bananapi.dtsi" + +/ { + compatible = "bananapi,bpi-m2s", "amlogic,a311d", "amlogic,g12b"; + model = "BananaPi M2S"; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c3; + }; +}; + +/* Camera (CSI) bus */ +&i2c1 { + status = "okay"; + pinctrl-0 = <&i2c1_sda_h6_pins>, <&i2c1_sck_h7_pins>; + pinctrl-names = "default"; +}; + +/* Display (DSI) bus */ +&i2c3 { + status = "okay"; + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; +}; + +&npu { + status = "okay"; +}; diff --git a/dts/src/arm64/amlogic/meson-g12b-a311d-libretech-cc.dts b/dts/src/arm64/amlogic/meson-g12b-a311d-libretech-cc.dts new file mode 100644 index 0000000000..65b963d794 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-g12b-a311d-libretech-cc.dts @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 BayLibre, SAS. + * Author: Jerome Brunet <jbrunet@baylibre.com> + */ + +/dts-v1/; + +#include <dt-bindings/clock/g12a-clkc.h> +#include "meson-g12b-a311d.dtsi" +#include "meson-libretech-cottonwood.dtsi" + +/ { + compatible = "libretech,aml-a311d-cc", "amlogic,a311d", "amlogic,g12b"; + model = "Libre Computer AML-A311D-CC Alta"; + + vddcpu_a: regulator-vddcpu-a { + compatible = "pwm-regulator"; + regulator-name = "VDDCPU_A"; + regulator-min-microvolt = <730000>; + regulator-max-microvolt = <1011000>; + regulator-boot-on; + regulator-always-on; + pwm-supply = <&dc_in>; + pwms = <&pwm_ab 0 1250 0>; + pwm-dutycycle-range = <100 0>; + }; + + sound { + model = "LC-ALTA"; + audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", + "TDMOUT_A IN 1", "FRDDR_B OUT 0", + "TDMOUT_A IN 2", "FRDDR_C OUT 0", + "TDM_A Playback", "TDMOUT_A OUT", + "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "TDMOUT_C IN 0", "FRDDR_A OUT 2", + "TDMOUT_C IN 1", "FRDDR_B OUT 2", + "TDMOUT_C IN 2", "FRDDR_C OUT 2", + "TDM_C Playback", "TDMOUT_C OUT", + "TDMIN_A IN 0", "TDM_A Capture", + "TDMIN_B IN 0", "TDM_A Capture", + "TDMIN_C IN 0", "TDM_A Capture", + "TDMIN_A IN 3", "TDM_A Loopback", + "TDMIN_B IN 3", "TDM_A Loopback", + "TDMIN_C IN 3", "TDM_A Loopback", + "TDMIN_A IN 1", "TDM_B Capture", + "TDMIN_B IN 1", "TDM_B Capture", + "TDMIN_C IN 1", "TDM_B Capture", + "TDMIN_A IN 4", "TDM_B Loopback", + "TDMIN_B IN 4", "TDM_B Loopback", + "TDMIN_C IN 4", "TDM_B Loopback", + "TDMIN_A IN 2", "TDM_C Capture", + "TDMIN_B IN 2", "TDM_C Capture", + "TDMIN_C IN 2", "TDM_C Capture", + "TDMIN_A IN 5", "TDM_C Loopback", + "TDMIN_B IN 5", "TDM_C Loopback", + "TDMIN_C IN 5", "TDM_C Loopback", + "TODDR_A IN 0", "TDMIN_A OUT", + "TODDR_B IN 0", "TDMIN_A OUT", + "TODDR_C IN 0", "TDMIN_A OUT", + "TODDR_A IN 1", "TDMIN_B OUT", + "TODDR_B IN 1", "TDMIN_B OUT", + "TODDR_C IN 1", "TDMIN_B OUT", + "TODDR_A IN 2", "TDMIN_C OUT", + "TODDR_B IN 2", "TDMIN_C OUT", + "TODDR_C IN 2", "TDMIN_C OUT", + "Lineout", "ACODEC LOLP", + "Lineout", "ACODEC LORP"; + }; +}; + +&cpu0 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu100 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu101 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu102 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu103 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&pwm_ab { + pinctrl-0 = <&pwm_a_e_pins>, <&pwm_b_x7_pins>; + clocks = <&xtal>, <&xtal>; + clock-names = "clkin0", "clkin1"; +}; diff --git a/dts/src/arm64/amlogic/meson-g12b-bananapi-cm4-cm4io.dts b/dts/src/arm64/amlogic/meson-g12b-bananapi-cm4-cm4io.dts new file mode 100644 index 0000000000..13d478f9c8 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-g12b-bananapi-cm4-cm4io.dts @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org> + */ + +/dts-v1/; + +#include "meson-g12b-bananapi-cm4.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "bananapi,bpi-cm4io", "bananapi,bpi-cm4", "amlogic,a311d", "amlogic,g12b"; + model = "BananaPi BPI-CM4IO Baseboard with BPI-CM4 Module"; + + aliases { + ethernet0 = ðmac; + i2c0 = &i2c1; + i2c1 = &i2c3; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 2>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "Function"; + linux,code = <KEY_FN>; + press-threshold-microvolt = <10000>; + }; + }; + + hdmi_connector: hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-blue { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led-green { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; + }; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "BPI-CM4IO"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&cecb_AO { + status = "okay"; +}; + +ðmac { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +/* CSI port */ +&i2c1 { + status = "okay"; +}; + +/* DSI port for touchscreen */ +&i2c3 { + status = "okay"; +}; + +/* miniPCIe port with USB + SIM slot */ +&pcie { + status = "okay"; +}; + +&sd_emmc_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +/* Peripheral Only USB-C port */ +&usb { + dr_mode = "peripheral"; + + status = "okay"; +}; diff --git a/dts/src/arm64/amlogic/meson-g12b-bananapi-cm4.dtsi b/dts/src/arm64/amlogic/meson-g12b-bananapi-cm4.dtsi new file mode 100644 index 0000000000..08c33ec7e9 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-g12b-bananapi-cm4.dtsi @@ -0,0 +1,388 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org> + */ + +#include "meson-g12b-a311d.dtsi" +#include <dt-bindings/gpio/meson-g12a-gpio.h> + +/ { + aliases { + serial0 = &uart_AO; + rtc1 = &vrtc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOAO_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + emmc_1v8: regulator-emmc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "EMMC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + dc_in: regulator-dc-in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vddio_c: regulator-vddio-c { + compatible = "regulator-gpio"; + regulator-name = "VDDIO_C"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + enable-gpios = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>; + enable-active-high; + regulator-always-on; + + gpios = <&gpio_ao GPIOAO_9 GPIO_OPEN_DRAIN>; + gpios-states = <1>; + + states = <1800000 0>, + <3300000 1>; + }; + + vddao_1v8: regulator-vddao-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + vddcpu_a: regulator-vddcpu-a { + /* + * MP8756GD DC/DC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_A"; + regulator-min-microvolt = <680000>; + regulator-max-microvolt = <1040000>; + + pwm-supply = <&dc_in>; + + pwms = <&pwm_ab 0 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddcpu_b: regulator-vddcpu-b { + /* + * SY8120B1ABC DC/DC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_B"; + regulator-min-microvolt = <680000>; + regulator-max-microvolt = <1040000>; + + pwm-supply = <&dc_in>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cpu0 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu100 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu101 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu102 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu103 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +/* Ethernet to be enabled in baseboard DT */ +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + phy-mode = "rgmii-txid"; + phy-handle = <&external_phy>; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +/* HDMI to be enabled in baseboard DT */ +&hdmi_tx { + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&dc_in>; +}; + +/* "Camera" I2C bus */ +&i2c1 { + pinctrl-0 = <&i2c1_sda_h6_pins>, <&i2c1_sck_h7_pins>; + pinctrl-names = "default"; +}; + +/* Main I2C bus */ +&i2c2 { + pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>; + pinctrl-names = "default"; +}; + +/* "ID" I2C bus */ +&i2c3 { + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; +}; + +&pcie { + reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>; +}; + +&pwm_ab { + pinctrl-0 = <&pwm_a_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; + + status = "okay"; +}; + +&pwm_ef { + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + + status = "okay"; +}; + +&saradc { + vref-supply = <&vddao_1v8>; + + status = "okay"; +}; + +/* on-module SDIO WiFi */ +&sd_emmc_a { + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + sd-uhs-sdr104; + max-frequency = <50000000>; + + non-removable; + disable-wp; + + /* WiFi firmware requires power in suspend */ + keep-power-in-suspend; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; + + status = "okay"; + + rtl8822cs: wifi@1 { + reg = <1>; + }; +}; + +/* SD card to be enabled in baseboard DT */ +&sd_emmc_b { + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_c>; +}; + +/* on-module eMMC */ +&sd_emmc_c { + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_1v8>; + + status = "okay"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +/* on-module UART BT */ +&uart_A { + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8822cs-bt"; + enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>; + device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>; + }; +}; + +&uart_AO { + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&usb { + phys = <&usb2_phy0>, <&usb2_phy1>; + phy-names = "usb2-phy0", "usb2-phy1"; +}; diff --git a/dts/src/arm64/amlogic/meson-g12b-bananapi.dtsi b/dts/src/arm64/amlogic/meson-g12b-bananapi.dtsi new file mode 100644 index 0000000000..4b8db872bb --- /dev/null +++ b/dts/src/arm64/amlogic/meson-g12b-bananapi.dtsi @@ -0,0 +1,519 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + * Copyright (c) 2023 Christian Hewitt <christianshewitt@gmail.com> + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + rtc1 = &vrtc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 4 GiB */ + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 2>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "RST"; + linux,code = <KEY_POWER>; + press-threshold-microvolt = <10000>; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + fan0: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + cooling-levels = <0 120 170 220>; + pwms = <&pwm_cd 1 40000 0>; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + dc_in: regulator-dc-in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vcc_5v: regulator-vcc-5v { + compatible = "regulator-fixed"; + regulator-name = "VCC_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_in>; + + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; + }; + + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vsys_3v3>; + regulator-always-on; + }; + + vcc_1v8: regulator-vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vddao_1v8: regulator-vddao-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vsys_3v3>; + regulator-always-on; + }; + + vddcpu_a: regulator-vddcpu-a { + compatible = "pwm-regulator"; + regulator-name = "VDDCPU_A"; + regulator-min-microvolt = <690000>; + regulator-max-microvolt = <1050000>; + pwm-supply = <&dc_in>; + pwms = <&pwm_ab 0 1250 0>; + pwm-dutycycle-range = <100 0>; + regulator-boot-on; + regulator-always-on; + }; + + vddcpu_b: regulator-vddcpu-b { + compatible = "pwm-regulator"; + regulator-name = "VDDCPU_B"; + regulator-min-microvolt = <690000>; + regulator-max-microvolt = <1050000>; + pwm-supply = <&vsys_3v3>; + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + regulator-boot-on; + regulator-always-on; + }; + + vsys_3v3: regulator-vsys-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VSYS_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + emmc_1v8: regulator-emmc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "EMMC_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + usb_pwr: regulator-usb-pwr { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + gpio = <&gpio GPIOA_6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "BPI-M2S"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cpu0 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu100 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu101 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu102 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu103 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +/* Main i2c bus */ +&i2c2 { + status = "okay"; + pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>; + pinctrl-names = "default"; +}; + +&pcie { + status = "okay"; + reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>; +}; + +&pwm_ab { + status = "okay"; + pinctrl-0 = <&pwm_a_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; +}; + +&pwm_cd { + status = "okay"; + pinctrl-0 = <&pwm_d_x6_pins>; + pinctrl-names = "default"; + pwm-gpios = <&gpio GPIOAO_10 GPIO_ACTIVE_HIGH>; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddao_1v8>; +}; + +/* SDIO */ +&sd_emmc_a { + /* enable if WiFi/BT board connected */ + status = "disabled"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + sd-uhs-sdr104; + max-frequency = <50000000>; + + non-removable; + disable-wp; + + /* WiFi firmware requires power in suspend */ + keep-power-in-suspend; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vsys_3v3>; + vqmmc-supply = <&vddao_1v8>; + + rtl8822cs: wifi@1 { + reg = <1>; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vsys_3v3>; + vqmmc-supply = <&vsys_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&emmc_1v8>; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_A { + /* enable if WiFi/BT board connected */ + status = "disabled"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "realtek,rtl8822cs-bt"; + enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>; + device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb2_phy0 { + phy-supply = <&dc_in>; +}; + +&usb2_phy1 { + phy-supply = <&usb_pwr>; +}; + +&usb3_pcie_phy { + phy-supply = <&usb_pwr>; +}; + +&usb { + status = "okay"; + dr_mode = "peripheral"; + phys = <&usb2_phy0>, <&usb2_phy1>; + phy-names = "usb2-phy0", "usb2-phy1"; +}; diff --git a/dts/src/arm64/amlogic/meson-g12b-gsking-x.dts b/dts/src/arm64/amlogic/meson-g12b-gsking-x.dts index 1fa6e75abd..bb73e10b5e 100644 --- a/dts/src/arm64/amlogic/meson-g12b-gsking-x.dts +++ b/dts/src/arm64/amlogic/meson-g12b-gsking-x.dts @@ -55,7 +55,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&frddr_a>; diff --git a/dts/src/arm64/amlogic/meson-g12b-gtking-pro.dts b/dts/src/arm64/amlogic/meson-g12b-gtking-pro.dts index afe375fa83..6eeedd54ab 100644 --- a/dts/src/arm64/amlogic/meson-g12b-gtking-pro.dts +++ b/dts/src/arm64/amlogic/meson-g12b-gtking-pro.dts @@ -56,7 +56,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&frddr_a>; diff --git a/dts/src/arm64/amlogic/meson-g12b-gtking.dts b/dts/src/arm64/amlogic/meson-g12b-gtking.dts index 5d96c14490..0da386cabe 100644 --- a/dts/src/arm64/amlogic/meson-g12b-gtking.dts +++ b/dts/src/arm64/amlogic/meson-g12b-gtking.dts @@ -22,7 +22,6 @@ spdif_dit: audio-codec-1 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; @@ -34,9 +33,9 @@ "TDMOUT_B IN 1", "FRDDR_B OUT 1", "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT", - "SPDIFOUT IN 0", "FRDDR_A OUT 3", - "SPDIFOUT IN 1", "FRDDR_B OUT 3", - "SPDIFOUT IN 2", "FRDDR_C OUT 3"; + "SPDIFOUT_A IN 0", "FRDDR_A OUT 3", + "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", + "SPDIFOUT_A IN 2", "FRDDR_C OUT 3"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, @@ -45,7 +44,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&frddr_a>; @@ -76,7 +74,7 @@ /* spdif hdmi or toslink interface */ dai-link-4 { - sound-dai = <&spdifout>; + sound-dai = <&spdifout_a>; codec-0 { sound-dai = <&spdif_dit>; @@ -140,7 +138,7 @@ }; }; -&spdifout { +&spdifout_a { pinctrl-0 = <&spdif_out_h_pins>; pinctrl-names = "default"; status = "okay"; diff --git a/dts/src/arm64/amlogic/meson-g12b-odroid-go-ultra.dts b/dts/src/arm64/amlogic/meson-g12b-odroid-go-ultra.dts new file mode 100644 index 0000000000..eed2a23047 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-g12b-odroid-go-ultra.dts @@ -0,0 +1,722 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Neil Armstrong <neil.armstrong@linaro.org> + */ + +/dts-v1/; + +#include "meson-g12b-s922x.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-toacodec.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "hardkernel,odroid-go-ultra", "amlogic,s922x", "amlogic,g12b"; + model = "Hardkernel ODROID-GO-Ultra"; + + aliases { + serial0 = &uart_AO; + rtc0 = &vrtc; + }; + + adc-joystick-left { + compatible = "adc-joystick"; + io-channels = <&saradc 2>, <&saradc 3>; + poll-interval = <10>; + #address-cells = <1>; + #size-cells = <0>; + + axis@0 { + reg = <0>; + linux,code = <ABS_Y>; + abs-range = <3150 950>; + abs-fuzz = <32>; + abs-flat = <64>; + }; + axis@1 { + reg = <1>; + linux,code = <ABS_X>; + abs-range = <700 2900>; + abs-fuzz = <32>; + abs-flat = <64>; + }; + }; + + adc-joystick-right { + compatible = "adc-joystick"; + io-channels = <&saradc 0>, <&saradc 1>; + poll-interval = <10>; + #address-cells = <1>; + #size-cells = <0>; + + axis@0 { + reg = <0>; + linux,code = <ABS_RY>; + abs-range = <3150 950>; + abs-fuzz = <32>; + abs-flat = <64>; + }; + axis@1 { + reg = <1>; + linux,code = <ABS_RX>; + abs-range = <800 3000>; + abs-fuzz = <32>; + abs-flat = <64>; + }; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + codec_clk: codec-clk { + compatible = "fixed-clock"; + clock-frequency = <12288000>; + clock-output-names = "codec_clk"; + #clock-cells = <0>; + }; + + gpio-keys { + compatible = "gpio-keys-polled"; + poll-interval = <10>; + pinctrl-0 = <&keypad_gpio_pins>; + pinctrl-names = "default"; + + volume-up-button { + label = "VOLUME-UP"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&gpio GPIOX_8 GPIO_ACTIVE_LOW>; + }; + volume-down-button { + label = "VOLUME-DOWN"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&gpio GPIOX_9 GPIO_ACTIVE_LOW>; + }; + dpad-up-button { + label = "DPAD-UP"; + linux,code = <BTN_DPAD_UP>; + gpios = <&gpio GPIOX_0 GPIO_ACTIVE_LOW>; + }; + dpad-down-button { + label = "DPAD-DOWN"; + linux,code = <BTN_DPAD_DOWN>; + gpios = <&gpio GPIOX_1 GPIO_ACTIVE_LOW>; + }; + dpad-left-button { + label = "DPAD-LEFT"; + linux,code = <BTN_DPAD_LEFT>; + gpios = <&gpio GPIOX_2 GPIO_ACTIVE_LOW>; + }; + dpad-right-button { + label = "DPAD-RIGHT"; + linux,code = <BTN_DPAD_RIGHT>; + gpios = <&gpio GPIOX_3 GPIO_ACTIVE_LOW>; + }; + a-button { + label = "A"; + linux,code = <BTN_EAST>; + gpios = <&gpio GPIOX_4 GPIO_ACTIVE_LOW>; + }; + b-button { + label = "B"; + linux,code = <BTN_SOUTH>; + gpios = <&gpio GPIOX_5 GPIO_ACTIVE_LOW>; + }; + y-button { + label = "Y"; + linux,code = <BTN_WEST>; + gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + }; + x-button { + label = "X"; + linux,code = <BTN_NORTH>; + gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>; + }; + f1-button { + label = "F1"; + linux,code = <BTN_TRIGGER_HAPPY1>; + gpios = <&gpio GPIOX_17 GPIO_ACTIVE_LOW>; + }; + f2-button { + label = "F2"; + linux,code = <BTN_TRIGGER_HAPPY2>; + gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>; + }; + f3-button { + label = "F3"; + linux,code = <BTN_TRIGGER_HAPPY3>; + gpios = <&gpio GPIOX_11 GPIO_ACTIVE_LOW>; + }; + f4-button { + label = "F4"; + linux,code = <BTN_TRIGGER_HAPPY4>; + gpios = <&gpio GPIOX_12 GPIO_ACTIVE_LOW>; + }; + f5-button { + label = "F5"; + linux,code = <BTN_TRIGGER_HAPPY5>; + gpios = <&gpio GPIOX_13 GPIO_ACTIVE_LOW>; + }; + f6-button { + label = "F6"; + linux,code = <BTN_TRIGGER_HAPPY6>; + gpios = <&gpio GPIOX_16 GPIO_ACTIVE_LOW>; + }; + top-left-button { + label = "TOP Left"; + linux,code = <BTN_TL>; + gpios = <&gpio GPIOX_14 GPIO_ACTIVE_LOW>; + }; + top-left2-button { + label = "TOP Left 2"; + linux,code = <BTN_TL2>; + gpios = <&gpio GPIOX_19 GPIO_ACTIVE_LOW>; + }; + top-right-button { + label = "TOP Right"; + linux,code = <BTN_TR>; + gpios = <&gpio GPIOX_15 GPIO_ACTIVE_LOW>; + }; + top-right2-button { + label = "TOP Right 2"; + linux,code = <BTN_TR2>; + gpios = <&gpio GPIOX_18 GPIO_ACTIVE_LOW>; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + leds { + compatible = "gpio-leds"; + + led-blue { + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + vdd_sys: regulator-vdd-sys { + compatible = "regulator-fixed"; + regulator-name = "VDD_SYS"; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + regulator-always-on; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "Odroid GO Ultra"; + audio-widgets = "Microphone", "Mic Jack", + "Headphone", "Headphones", + "Speaker", "Internal Speakers"; + audio-aux-devs = <&tdmout_b>, <&tdmin_b>, <&speaker_amp>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "TDMIN_B IN 1", "TDM_B Capture", + "TDMIN_B IN 4", "TDM_B Loopback", + "TODDR_A IN 1", "TDMIN_B OUT", + "MICL", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR", + "Speaker Amplifier INL", "HPOL", + "Speaker Amplifier INR", "HPOR", + "Internal Speakers", "Speaker Amplifier OUTL", + "Internal Speakers", "Speaker Amplifier OUTR"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&toddr_a>; + }; + + dai-link-2 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&rk817>; + }; + }; + }; + + speaker_amp: speaker-amplifier { + compatible = "simple-audio-amplifier"; + sound-name-prefix = "Speaker Amplifier"; + VCC-supply = <&hp_5v>; + }; +}; + +&arb { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu100 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu101 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu102 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu103 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +/* RK817 only supports 12.5mV steps, round up the values */ +&cpu_opp_table_0 { + opp-1000000000 { + opp-microvolt = <737500>; + }; + opp-1200000000 { + opp-microvolt = <737500>; + }; + opp-1398000000 { + opp-microvolt = <762500>; + }; + opp-1512000000 { + opp-microvolt = <800000>; + }; + opp-1608000000 { + opp-microvolt = <837500>; + }; + opp-1704000000 { + opp-microvolt = <862500>; + }; + opp-1896000000 { + opp-microvolt = <987500>; + }; + opp-1992000000 { + opp-microvolt = <1012500>; + }; +}; + +/* RK818 only supports 12.5mV steps, round up the values */ +&cpub_opp_table_1 { + opp-1000000000 { + opp-microvolt = <775000>; + }; + opp-1200000000 { + opp-microvolt = <775000>; + }; + opp-1398000000 { + opp-microvolt = <800000>; + }; + opp-1512000000 { + opp-microvolt = <825000>; + }; + opp-1608000000 { + opp-microvolt = <862500>; + }; + opp-1704000000 { + opp-microvolt = <900000>; + }; + opp-1800000000 { + opp-microvolt = <987500>; + }; + opp-1908000000 { + opp-microvolt = <1025000>; + }; +}; + +&i2c_AO { + status = "okay"; + pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>; + pinctrl-names = "default"; + + rk818: pmic@1c { + compatible = "rockchip,rk818"; + reg = <0x1c>; + interrupt-parent = <&gpio_intc>; + interrupts = <IRQID_GPIOAO_7 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_7 */ + #clock-cells = <1>; + + vcc1-supply = <&vdd_sys>; + vcc2-supply = <&vdd_sys>; + vcc3-supply = <&vdd_sys>; + vcc4-supply = <&vdd_sys>; + vcc6-supply = <&vdd_sys>; + vcc7-supply = <&vcc_2v3>; + vcc8-supply = <&vcc_2v3>; + vcc9-supply = <&vddao_3v3>; + boost-supply = <&vdd_sys>; + + regulators { + vddcpu_a: DCDC_REG1 { + regulator-name = "vddcpu_a"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <775000>; + regulator-max-microvolt = <1025000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <775000>; + }; + }; + + vdd_ee: DCDC_REG2 { + regulator-name = "vdd_ee"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <875000>; + regulator-max-microvolt = <1250000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <875000>; + }; + }; + + vddq_1v1: DCDC_REG3 { + regulator-name = "vddq_1v1"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vddao_3v3: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vddao_3v3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + hp_5v: DCDC_BOOST { + regulator-always-on; + regulator-boot-on; + regulator-name = "hp_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vddio_ao1v8: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vddio_ao1v8"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vddq_1v8: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vddq_1v8"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vddio_c: LDO_REG9 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vddio_c"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_sd: SWITCH_REG { + regulator-name = "vcc_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + OTG_SWITCH { + regulator-name = "otg_switch"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2c3 { + status = "okay"; + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; + + rk817: pmic@20 { + compatible = "rockchip,rk817"; + reg = <0x20>; + interrupt-parent = <&gpio_intc>; + + interrupts = <IRQID_GPIOAO_5 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_5 */ + + vcc1-supply = <&vdd_sys>; + vcc2-supply = <&vdd_sys>; + vcc3-supply = <&vdd_sys>; + vcc4-supply = <&vdd_sys>; + vcc5-supply = <&vdd_sys>; + vcc6-supply = <&vdd_sys>; + vcc7-supply = <&vdd_sys>; + vcc8-supply = <&vdd_sys>; + vcc9-supply = <&rk817_boost>; + + #sound-dai-cells = <0>; + clocks = <&codec_clk>; + clock-names = "mclk"; + + #clock-cells = <1>; + + regulators { + vddcpu_b: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <737500>; + regulator-max-microvolt = <1012500>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vddcpu_b"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_2v3: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2300000>; + regulator-max-microvolt = <2400000>; + regulator-initial-mode = <0x2>; + regulator-name = "vcc_2v3"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vdd_codec"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_lcd: LDO_REG8 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_lcd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk817_boost: BOOST { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5400000>; + regulator-name = "rk817_boost"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + usb_host: OTG_SWITCH { + regulator-name = "usb_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&clkc_audio { + status = "okay"; +}; + +ð_phy { + status = "disabled"; +}; + +&frddr_a { + status = "okay"; +}; + +&periphs_pinctrl { + keypad_gpio_pins: keypad-gpio-state { + mux { + groups = "GPIOX_0", "GPIOX_1", "GPIOX_2", "GPIOX_3", + "GPIOX_4", "GPIOX_5", "GPIOX_6", "GPIOX_7", + "GPIOX_8", "GPIOX_9", "GPIOX_10", "GPIOX_11", + "GPIOX_12", "GPIOX_13", "GPIOX_14", "GPIOX_15", + "GPIOX_16", "GPIOX_17", "GPIOX_18", "GPIOX_19"; + function = "gpio_periphs"; + bias-pull-up; + output-disable; + }; + }; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao1v8>; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vddio_c>; + +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vddio_ao1v8>; +}; + + +&tdmif_b { + pinctrl-0 = <&tdm_b_dout0_pins>, <&tdm_b_fs_pins>, <&tdm_b_sclk_pins>, <&tdm_b_din1_pins>; + pinctrl-names = "default"; + status = "okay"; + + assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD1>, + <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD1>; + assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_B_SCLK>, + <&clkc_audio AUD_CLKID_MST_B_LRCLK>; + assigned-clock-rates = <0>, <0>; +}; + +&tdmin_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&toddr_a { + status = "okay"; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + dr_mode = "peripheral"; +}; + +&usb2_phy0 { + status = "okay"; +}; + +&usb2_phy1 { + status = "okay"; + phy-supply = <&usb_host>; +}; diff --git a/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi b/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi index fd3fa82e4c..d80dd9a3da 100644 --- a/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi +++ b/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dtsi @@ -4,17 +4,11 @@ * Author: Neil Armstrong <narmstrong@baylibre.com> */ -#include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/meson-g12a-gpio.h> -#include <dt-bindings/sound/meson-g12a-toacodec.h> -#include <dt-bindings/sound/meson-g12a-tohdmitx.h> +#include "meson-g12b-odroid.dtsi" / { aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; rtc0 = &rtc; - rtc1 = &vrtc; }; dio2133: audio-amplifier-0 { @@ -25,142 +19,7 @@ status = "okay"; }; - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - leds { - compatible = "gpio-leds"; - - led-blue { - label = "n2:blue"; - gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; - - tflash_vdd: regulator-tflash_vdd { - compatible = "regulator-fixed"; - - regulator-name = "TFLASH_VDD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; - - tf_io: gpio-regulator-tf_io { - compatible = "regulator-gpio"; - - regulator-name = "TF_IO"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; - gpios-states = <0>; - - states = <3300000 0>, - <1800000 1>; - }; - - flash_1v8: regulator-flash_1v8 { - compatible = "regulator-fixed"; - regulator-name = "FLASH_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - main_12v: regulator-main_12v { - compatible = "regulator-fixed"; - regulator-name = "12V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - }; - - vcc_5v: regulator-vcc_5v { - compatible = "regulator-fixed"; - regulator-name = "5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - vin-supply = <&main_12v>; - gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-high; - }; - - vcc_1v8: regulator-vcc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - /* FIXME: actually controlled by VDDCPU_B_EN */ - }; - - vddcpu_a: regulator-vddcpu-a { - /* - * MP8756GD Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU_A"; - regulator-min-microvolt = <721000>; - regulator-max-microvolt = <1022000>; - - pwm-supply = <&main_12v>; - - pwms = <&pwm_ab 0 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - vddcpu_b: regulator-vddcpu-b { - /* - * Silergy SY8120B1ABC Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU_B"; - regulator-min-microvolt = <721000>; - regulator-max-microvolt = <1022000>; - - pwm-supply = <&main_12v>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - hub_5v: regulator-hub_5v { + hub_5v: regulator-hub-5v { compatible = "regulator-fixed"; regulator-name = "HUB_5V"; regulator-min-microvolt = <5000000>; @@ -172,47 +31,6 @@ enable-active-high; }; - usb_pwr_en: regulator-usb_pwr_en { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR_EN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - /* Connected to the microUSB port power enable */ - gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vddao_1v8: regulator-vddao_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&main_12v>; - regulator-always-on; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - sound { compatible = "amlogic,axg-sound-card"; model = "ODROID-N2"; @@ -260,7 +78,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&frddr_a>; @@ -346,68 +163,13 @@ status = "okay"; }; -&arb { - status = "okay"; -}; - -&cec_AO { - pinctrl-0 = <&cec_ao_a_h_pins>; - pinctrl-names = "default"; - status = "disabled"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cecb_AO { - pinctrl-0 = <&cec_ao_b_h_pins>; +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; pinctrl-names = "default"; status = "okay"; - hdmi-phandle = <&hdmi_tx>; -}; - -&clkc_audio { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu100 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu101 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu102 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; -}; - -&cpu103 { - cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; - clock-latency = <50000>; + phy-mode = "rgmii"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; }; &ext_mdio { @@ -422,31 +184,10 @@ interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>; }; }; -ðmac { - pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-mode = "rgmii"; - phy-handle = <&external_phy>; - amlogic,tx-delay-ns = <2>; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - &gpio { gpio-line-names = /* GPIOZ */ @@ -499,7 +240,7 @@ * This signal should be handled by a USB specific power sequence * in order to reset the Hub when USB bus is powered down. */ - hog-0 { + usb-hub-hog { gpio-hog; gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>; output-high; @@ -507,26 +248,6 @@ }; }; -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; - hdmi-supply = <&vcc_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; - linux,rc-map-name = "rc-odroid"; -}; - &i2c3 { status = "okay"; pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; @@ -539,62 +260,11 @@ }; }; -&pwm_ab { - pinctrl-0 = <&pwm_a_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin0"; +&ir { status = "okay"; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-0 = <&remote_input_ao_pins>; pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddao_1v8>; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&tflash_vdd>; - vqmmc-supply = <&tf_io>; - -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&flash_1v8>; + linux,rc-map-name = "rc-odroid"; }; /* @@ -618,73 +288,14 @@ }; }; -&tdmif_b { - status = "okay"; -}; - -&tdmif_c { - status = "okay"; -}; - -&tdmin_a { - status = "okay"; -}; - -&tdmin_b { - status = "okay"; -}; - -&tdmin_c { - status = "okay"; -}; - -&tdmin_lb { - status = "okay"; -}; - -&tdmout_b { - status = "okay"; -}; - -&tdmout_c { - status = "okay"; -}; - &toacodec { status = "okay"; }; -&tohdmitx { - status = "okay"; -}; - -&toddr_a { - status = "okay"; -}; - -&toddr_b { - status = "okay"; -}; - -&toddr_c { - status = "okay"; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - &usb { - status = "okay"; vbus-supply = <&usb_pwr_en>; }; -&usb2_phy0 { - phy-supply = <&vcc_5v>; -}; - &usb2_phy1 { /* Enable the hub which is connected to this port */ phy-supply = <&hub_5v>; diff --git a/dts/src/arm64/amlogic/meson-g12b-odroid-n2l.dts b/dts/src/arm64/amlogic/meson-g12b-odroid-n2l.dts new file mode 100644 index 0000000000..e26f3e3258 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-g12b-odroid-n2l.dts @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Dongjin Kim <tobetter@gmail.com> + */ + +/dts-v1/; + +/* The Amlogic S922X Rev. C supports the same OPPs as the A311D variant */ +#include "meson-g12b-a311d.dtsi" +#include "meson-g12b-odroid.dtsi" + +/ { + compatible = "hardkernel,odroid-n2l", "amlogic,s922x", "amlogic,g12b"; + model = "Hardkernel ODROID-N2L"; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "ODROID-N2L"; + audio-aux-devs = <&tdmout_b>, <&tdmin_a>, <&tdmin_b>, + <&tdmin_c>, <&tdmin_lb>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "TDMIN_A IN 4", "TDM_B Loopback", + "TDMIN_B IN 4", "TDM_B Loopback", + "TDMIN_C IN 4", "TDM_B Loopback", + "TDMIN_LB IN 1", "TDM_B Loopback", + "TODDR_A IN 0", "TDMIN_A OUT", + "TODDR_B IN 0", "TDMIN_A OUT", + "TODDR_C IN 0", "TDMIN_A OUT", + "TODDR_A IN 1", "TDMIN_B OUT", + "TODDR_B IN 1", "TDMIN_B OUT", + "TODDR_C IN 1", "TDMIN_B OUT", + "TODDR_A IN 2", "TDMIN_C OUT", + "TODDR_B IN 2", "TDMIN_C OUT", + "TODDR_C IN 2", "TDMIN_C OUT", + "TODDR_A IN 6", "TDMIN_LB OUT", + "TODDR_B IN 6", "TDMIN_LB OUT", + "TODDR_C IN 6", "TDMIN_LB OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + dai-link-3 { + sound-dai = <&toddr_a>; + }; + + dai-link-4 { + sound-dai = <&toddr_b>; + }; + + dai-link-5 { + sound-dai = <&toddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-6 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-7 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +ð_phy { + status = "disabled"; +}; + +&vddcpu_a { + regulator-min-microvolt = <680000>; + regulator-max-microvolt = <1040000>; + + pwms = <&pwm_ab 0 1500 0>; +}; + +&vddcpu_b { + regulator-min-microvolt = <680000>; + regulator-max-microvolt = <1040000>; + + pwms = <&pwm_AO_cd 1 1500 0>; +}; + +&usb2_phy0 { + phy-supply = <&usb_pwr_en>; +}; + +&usb2_phy1 { + phy-supply = <&usb_pwr_en>; +}; diff --git a/dts/src/arm64/amlogic/meson-g12b-odroid.dtsi b/dts/src/arm64/amlogic/meson-g12b-odroid.dtsi new file mode 100644 index 0000000000..09d959aefb --- /dev/null +++ b/dts/src/arm64/amlogic/meson-g12b-odroid.dtsi @@ -0,0 +1,445 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-toacodec.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + rtc1 = &vrtc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + fan: gpio-fan { + compatible = "gpio-fan"; + gpios = <&gpio_ao GPIOAO_10 GPIO_ACTIVE_HIGH>; + /* Using Dummy Speed */ + gpio-fan,speed-map = <0 0>, <1 1>; + #cooling-cells = <2>; + }; + + leds { + compatible = "gpio-leds"; + + led-blue { + label = "n2:blue"; + gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + tflash_vdd: regulator-tflash-vdd { + compatible = "regulator-fixed"; + + regulator-name = "TFLASH_VDD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + tf_io: gpio-regulator-tf-io { + compatible = "regulator-gpio"; + + regulator-name = "TF_IO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + + states = <3300000 0>, + <1800000 1>; + }; + + flash_1v8: regulator-flash-1v8 { + compatible = "regulator-fixed"; + regulator-name = "FLASH_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + main_12v: regulator-main-12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + usb_pwr_en: regulator-usb-pwr-en { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR_EN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + /* Connected to the microUSB port power enable */ + gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vcc_5v: regulator-vcc-5v { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&main_12v>; + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; + }; + + vcc_1v8: regulator-vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + /* FIXME: actually controlled by VDDCPU_B_EN */ + }; + + vddcpu_a: regulator-vddcpu-a { + /* + * MP8756GD Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_A"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + pwm-supply = <&main_12v>; + + pwms = <&pwm_ab 0 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddcpu_b: regulator-vddcpu-b { + /* + * Silergy SY8120B1ABC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_B"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + pwm-supply = <&main_12v>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddao_1v8: regulator-vddao-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-always-on; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&clkc_audio { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu100 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu101 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu102 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu103 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu_thermal { + trips { + cpu_active: cpu-active { + temperature = <60000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; + }; + + cooling-maps { + map { + trip = <&cpu_active>; + cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&ddr_thermal { + trips { + ddr_active: ddr-active { + temperature = <60000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; + }; + + cooling-maps { + map { + trip = <&ddr_active>; + cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&pwm_ab { + pinctrl-0 = <&pwm_a_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; + status = "okay"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddao_1v8>; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&tflash_vdd>; + vqmmc-supply = <&tf_io>; + +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&flash_1v8>; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmif_c { + status = "okay"; +}; + +&tdmin_a { + status = "okay"; +}; + +&tdmin_b { + status = "okay"; +}; + +&tdmin_c { + status = "okay"; +}; + +&tdmin_lb { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tdmout_c { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&toddr_a { + status = "okay"; +}; + +&toddr_b { + status = "okay"; +}; + +&toddr_c { + status = "okay"; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; +}; + +&usb2_phy0 { + phy-supply = <&vcc_5v>; +}; diff --git a/dts/src/arm64/amlogic/meson-g12b-radxa-zero2.dts b/dts/src/arm64/amlogic/meson-g12b-radxa-zero2.dts new file mode 100644 index 0000000000..890f5bfebb --- /dev/null +++ b/dts/src/arm64/amlogic/meson-g12b-radxa-zero2.dts @@ -0,0 +1,489 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> + * Copyright (c) 2022 Radxa Limited + * Author: Yuntian Zhang <yt@radxa.com> + */ + +/dts-v1/; + +#include "meson-g12b-a311d.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "radxa,zero2", "amlogic,a311d", "amlogic,g12b"; + model = "Radxa Zero2"; + + aliases { + serial0 = &uart_AO; + serial2 = &uart_A; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + power-button { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-green { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio GPIOA_12 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + ao_5v: regulator-ao-5v { + compatible = "regulator-fixed"; + regulator-name = "AO_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vcc_1v8: regulator-vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + /* FIXME: actually controlled by VDDCPU_B_EN */ + }; + + vddao_1v8: regulator-vddao-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&ao_5v>; + regulator-always-on; + }; + + vddcpu_a: regulator-vddcpu-a { + /* + * MP8756GD Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_A"; + regulator-min-microvolt = <730000>; + regulator-max-microvolt = <1022000>; + + pwm-supply = <&ao_5v>; + + pwms = <&pwm_ab 0 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddcpu_b: regulator-vddcpu-b { + /* + * Silergy SY8120B1ABC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_B"; + regulator-min-microvolt = <730000>; + regulator-max-microvolt = <1022000>; + + pwm-supply = <&ao_5v>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "RADXA-ZERO2"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; + + wifi32k: clock-0 { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; +}; + +&arb { + status = "okay"; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&clkc_audio { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu100 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu101 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu102 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu103 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&gpio { + gpio-line-names = + /* GPIOZ */ + "PIN_27", "PIN_28", "PIN_7", "PIN_11", "PIN_13", "PIN_15", "PIN_18", "PIN_40", + "", "", "", "", "", "", "", "", + /* GPIOH */ + "", "", "", "", "PIN_19", "PIN_21", "PIN_24", "PIN_23", + "", + /* BOOT */ + "", "", "", "", "", "", "", "", + "", "", "", "", "EMMC_PWRSEQ", "", "", "", + /* GPIOC */ + "", "", "", "", "", "", "SD_CD", "PIN_36", + /* GPIOA */ + "PIN_32", "PIN_12", "PIN_35", "", "", "PIN_38", "", "", + "", "", "", "", "LED_GREEN", "PIN_31", "PIN_3", "PIN_5", + /* GPIOX */ + "", "", "", "", "", "", "SDIO_PWRSEQ", "", + "", "", "", "", "", "", "", "", + "", "BT_SHUTDOWN", "", ""; +}; + +&gpio_ao { + gpio-line-names = + /* GPIOAO */ + "PIN_8", "PIN_10", "", "BTN_POWER", "", "", "", "PIN_29", + "PIN_33", "PIN_37", "FAN", "", + /* GPIOE */ + "", "", ""; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&ao_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + status = "disabled"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&pwm_ab { + pinctrl-0 = <&pwm_a_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; + status = "okay"; +}; + +&pwm_ef { + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; + status = "okay"; +}; + +&pwm_AO_ab { + pinctrl-0 = <&pwm_ao_a_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; + status = "okay"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddao_1v8>; +}; + +/* SDIO */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_1v8>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; +}; diff --git a/dts/src/arm64/amlogic/meson-g12b-s922x-bananapi-m2s.dts b/dts/src/arm64/amlogic/meson-g12b-s922x-bananapi-m2s.dts new file mode 100644 index 0000000000..7f66f263a2 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-g12b-s922x-bananapi-m2s.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-g12b-s922x.dtsi" +#include "meson-g12b-bananapi.dtsi" + +/ { + compatible = "bananapi,bpi-m2s", "amlogic,s922x", "amlogic,g12b"; + model = "BananaPi M2S"; +}; diff --git a/dts/src/arm64/amlogic/meson-g12b-ugoos-am6.dts b/dts/src/arm64/amlogic/meson-g12b-ugoos-am6.dts index 0c7892600d..6396f190d7 100644 --- a/dts/src/arm64/amlogic/meson-g12b-ugoos-am6.dts +++ b/dts/src/arm64/amlogic/meson-g12b-ugoos-am6.dts @@ -17,7 +17,6 @@ spdif_dit: audio-codec-1 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; @@ -29,9 +28,9 @@ "TDMOUT_B IN 1", "FRDDR_B OUT 1", "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT", - "SPDIFOUT IN 0", "FRDDR_A OUT 3", - "SPDIFOUT IN 1", "FRDDR_B OUT 3", - "SPDIFOUT IN 2", "FRDDR_C OUT 3"; + "SPDIFOUT_A IN 0", "FRDDR_A OUT 3", + "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", + "SPDIFOUT_A IN 2", "FRDDR_C OUT 3"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, @@ -40,7 +39,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&frddr_a>; @@ -71,7 +69,7 @@ /* spdif hdmi or toslink interface */ dai-link-4 { - sound-dai = <&spdifout>; + sound-dai = <&spdifout_a>; codec-0 { sound-dai = <&spdif_dit>; @@ -126,7 +124,7 @@ linux,rc-map-name = "rc-khadas"; }; -&spdifout { +&spdifout_a { pinctrl-0 = <&spdif_out_h_pins>; pinctrl-names = "default"; status = "okay"; diff --git a/dts/src/arm64/amlogic/meson-g12b-w400.dtsi b/dts/src/arm64/amlogic/meson-g12b-w400.dtsi index b40d2c1002..4cb6930ffb 100644 --- a/dts/src/arm64/amlogic/meson-g12b-w400.dtsi +++ b/dts/src/arm64/amlogic/meson-g12b-w400.dtsi @@ -39,7 +39,7 @@ clock-names = "ext_clock"; }; - flash_1v8: regulator-flash_1v8 { + flash_1v8: regulator-flash-1v8 { compatible = "regulator-fixed"; regulator-name = "FLASH_1V8"; regulator-min-microvolt = <1800000>; @@ -48,7 +48,7 @@ regulator-always-on; }; - main_12v: regulator-main_12v { + main_12v: regulator-main-12v { compatible = "regulator-fixed"; regulator-name = "12V"; regulator-min-microvolt = <12000000>; @@ -56,7 +56,7 @@ regulator-always-on; }; - vcc_5v: regulator-vcc_5v { + vcc_5v: regulator-vcc-5v { compatible = "regulator-fixed"; regulator-name = "VCC_5V"; regulator-min-microvolt = <5000000>; @@ -67,7 +67,7 @@ enable-active-high; }; - vcc_1v8: regulator-vcc_1v8 { + vcc_1v8: regulator-vcc-1v8 { compatible = "regulator-fixed"; regulator-name = "VCC_1V8"; regulator-min-microvolt = <1800000>; @@ -76,7 +76,7 @@ regulator-always-on; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; @@ -269,7 +269,7 @@ interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/dts/src/arm64/amlogic/meson-g12b.dtsi b/dts/src/arm64/amlogic/meson-g12b.dtsi index ee8fcae9f9..86e6ceb31d 100644 --- a/dts/src/arm64/amlogic/meson-g12b.dtsi +++ b/dts/src/arm64/amlogic/meson-g12b.dtsi @@ -105,6 +105,8 @@ l2: l2-cache0 { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; }; @@ -139,3 +141,11 @@ &mali { dma-coherent; }; + +&pmu { + compatible = "amlogic,g12b-ddr-pmu"; +}; + +&npu { + power-domains = <&pwrc PWRC_G12A_NNA_ID>; +}; diff --git a/dts/src/arm64/amlogic/meson-gx-libretech-pc.dtsi b/dts/src/arm64/amlogic/meson-gx-libretech-pc.dtsi index bcdf55f48a..efd662a452 100644 --- a/dts/src/arm64/amlogic/meson-gx-libretech-pc.dtsi +++ b/dts/src/arm64/amlogic/meson-gx-libretech-pc.dtsi @@ -17,7 +17,7 @@ io-channel-names = "buttons"; keyup-threshold-microvolt = <1800000>; - update-button { + button-update { label = "update"; linux,code = <KEY_VENDOR>; press-threshold-microvolt = <1300000>; @@ -84,7 +84,7 @@ reg = <0x0 0x0 0x0 0x80000000>; }; - ao_5v: regulator-ao_5v { + ao_5v: regulator-ao-5v { compatible = "regulator-fixed"; regulator-name = "AO_5V"; regulator-min-microvolt = <5000000>; @@ -93,7 +93,7 @@ regulator-always-on; }; - dc_in: regulator-dc_in { + dc_in: regulator-dc-in { compatible = "regulator-fixed"; regulator-name = "DC_IN"; regulator-min-microvolt = <5000000>; @@ -120,7 +120,7 @@ }; }; - vcc_card: regulator-vcc_card { + vcc_card: regulator-vcc-card { compatible = "regulator-fixed"; regulator-name = "VCC_CARD"; regulator-min-microvolt = <3300000>; @@ -141,7 +141,7 @@ gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>; }; - vddio_ao18: regulator-vddio_ao18 { + vddio_ao18: regulator-vddio-ao18 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; @@ -150,7 +150,7 @@ regulator-always-on; }; - vddio_ao3v3: regulator-vddio_ao3v3 { + vddio_ao3v3: regulator-vddio-ao3v3 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO3V3"; regulator-min-microvolt = <3300000>; @@ -159,7 +159,7 @@ regulator-always-on; }; - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; @@ -201,7 +201,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; diff --git a/dts/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi b/dts/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi index dafc841f7c..08d6b69ba4 100644 --- a/dts/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi +++ b/dts/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi @@ -26,7 +26,6 @@ spdif_dit: audio-codec-0 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; @@ -51,28 +50,28 @@ regulator-always-on; }; - vddio_ao18: regulator-vddio_ao18 { + vddio_ao18: regulator-vddio-ao18 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; @@ -137,8 +136,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; - dai-link-0 { sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; }; diff --git a/dts/src/arm64/amlogic/meson-gx.dtsi b/dts/src/arm64/amlogic/meson-gx.dtsi index 023a520054..2673f0dbaf 100644 --- a/dts/src/arm64/amlogic/meson-gx.dtsi +++ b/dts/src/arm64/amlogic/meson-gx.dtsi @@ -132,6 +132,8 @@ l2: l2-cache0 { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; @@ -232,7 +234,7 @@ reg = <0x14 0x10>; }; - eth_mac: eth_mac@34 { + eth_mac: eth-mac@34 { reg = <0x34 0x10>; }; @@ -249,7 +251,7 @@ scpi_clocks: clocks { compatible = "arm,scpi-clocks"; - scpi_dvfs: scpi_clocks@0 { + scpi_dvfs: clocks-0 { compatible = "arm,scpi-dvfs-clocks"; #clock-cells = <1>; clock-indices = <0>; @@ -531,7 +533,7 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>; - hwrng: rng { + hwrng: rng@0 { compatible = "amlogic,meson-rng"; reg = <0x0 0x0 0x0 0x4>; }; @@ -602,21 +604,21 @@ sd_emmc_a: mmc@70000 { compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; reg = <0x0 0x70000 0x0 0x800>; - interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; sd_emmc_b: mmc@72000 { compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; reg = <0x0 0x72000 0x0 0x800>; - interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; sd_emmc_c: mmc@74000 { compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; reg = <0x0 0x74000 0x0 0x800>; - interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; }; diff --git a/dts/src/arm64/amlogic/meson-gxbb-kii-pro.dts b/dts/src/arm64/amlogic/meson-gxbb-kii-pro.dts index 6d8cc00fed..f28452b9f0 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-kii-pro.dts +++ b/dts/src/arm64/amlogic/meson-gxbb-kii-pro.dts @@ -6,21 +6,28 @@ /dts-v1/; #include "meson-gxbb-p20x.dtsi" - #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> +#include <dt-bindings/sound/meson-aiu.h> + / { compatible = "videostrong,kii-pro", "amlogic,meson-gxbb"; model = "Videostrong KII Pro"; + spdif_dit: audio-codec-0 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + sound-name-prefix = "DIT"; + }; + leds { compatible = "gpio-leds"; - status { + led { gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>; - default-state = "off"; color = <LED_COLOR_ID_RED>; function = LED_FUNCTION_STATUS; + default-state = "off"; }; }; @@ -35,22 +42,58 @@ }; }; -}; + sound { + compatible = "amlogic,gx-sound-card"; + model = "KII-PRO"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>; + }; + dai-link-2 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; -&uart_A { - status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; - bluetooth { - compatible = "brcm,bcm4335a0"; + dai-link-3 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>; + + codec-0 { + sound-dai = <&spdif_dit>; + }; + }; + + dai-link-4 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; }; }; - +&aiu { + status = "okay"; + pinctrl-0 = <&spdif_out_y_pins>; + pinctrl-names = "default"; +}; ðmac { status = "okay"; @@ -78,3 +121,19 @@ &ir { linux,rc-map-name = "rc-videostrong-kii-pro"; }; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm4335a0"; + shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; diff --git a/dts/src/arm64/amlogic/meson-gxbb-nanopi-k2.dts b/dts/src/arm64/amlogic/meson-gxbb-nanopi-k2.dts index 7d94160f58..1fd2e56e6b 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-nanopi-k2.dts +++ b/dts/src/arm64/amlogic/meson-gxbb-nanopi-k2.dts @@ -142,7 +142,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; diff --git a/dts/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts b/dts/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts index 63137ce3cb..cca129ce2c 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/dts/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts @@ -78,21 +78,21 @@ <3300000 1>; }; - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; @@ -149,7 +149,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; diff --git a/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts b/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts index 201596247f..c431986e6a 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts +++ b/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts @@ -67,7 +67,7 @@ regulator-always-on; }; - hdmi_p5v0: regulator-hdmi_p5v0 { + hdmi_p5v0: regulator-hdmi-p5v0 { compatible = "regulator-fixed"; regulator-name = "HDMI_P5V0"; regulator-min-microvolt = <5000000>; @@ -76,7 +76,7 @@ vin-supply = <&p5v0>; }; - tflash_vdd: regulator-tflash_vdd { + tflash_vdd: regulator-tflash-vdd { compatible = "regulator-fixed"; regulator-name = "TFLASH_VDD"; @@ -92,7 +92,7 @@ vin-supply = <&vddio_ao3v3>; }; - tf_io: gpio-regulator-tf_io { + tf_io: gpio-regulator-tf-io { compatible = "regulator-gpio"; regulator-name = "TF_IO"; @@ -148,7 +148,7 @@ vin-supply = <&p5v0>; }; - ddr3_1v5: regulator-ddr3_1v5 { + ddr3_1v5: regulator-ddr3-1v5 { compatible = "regulator-fixed"; regulator-name = "DDR3_1V5"; regulator-min-microvolt = <1500000>; @@ -184,7 +184,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; @@ -250,21 +249,6 @@ }; }; -&gpio_ao { - /* - * WARNING: The USB Hub on the Odroid-C2 needs a reset signal - * to be turned high in order to be detected by the USB Controller - * This signal should be handled by a USB specific power sequence - * in order to reset the Hub when USB bus is powered down. - */ - hog-0 { - gpio-hog; - gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "usb-hub-reset"; - }; -}; - &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; @@ -414,5 +398,16 @@ }; &usb1 { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; + + hub@1 { + /* Genesys Logic GL852G USB 2.0 hub */ + compatible = "usb5e3,610"; + reg = <1>; + vdd-supply = <&p5v0>; + reset-gpio = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>; + }; }; diff --git a/dts/src/arm64/amlogic/meson-gxbb-p200.dts b/dts/src/arm64/amlogic/meson-gxbb-p200.dts index 3c93d1898b..7f94716876 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-p200.dts +++ b/dts/src/arm64/amlogic/meson-gxbb-p200.dts @@ -9,19 +9,26 @@ #include "meson-gxbb-p20x.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/sound/meson-aiu.h> / { compatible = "amlogic,p200", "amlogic,meson-gxbb"; model = "Amlogic Meson GXBB P200 Development Board"; - avdd18_usb_adc: regulator-avdd18_usb_adc { + spdif_dit: audio-codec-0 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + sound-name-prefix = "DIT"; + }; + + avdd18_usb_adc: regulator-avdd18-usb-adc { compatible = "regulator-fixed"; regulator-name = "AVDD18_USB_ADC"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - adc_keys { + keys { compatible = "adc-keys"; io-channels = <&saradc 0>; io-channel-names = "buttons"; @@ -57,6 +64,58 @@ press-threshold-microvolt = <0>; /* 0% */ }; }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "P200"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; + + dai-link-3 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>; + + codec-0 { + sound-dai = <&spdif_dit>; + }; + }; + + dai-link-4 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&aiu { + status = "okay"; + pinctrl-0 = <&spdif_out_y_pins>; + pinctrl-names = "default"; }; ðmac { diff --git a/dts/src/arm64/amlogic/meson-gxbb-p201.dts b/dts/src/arm64/amlogic/meson-gxbb-p201.dts index 150a82f3b2..6f81eed83b 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-p201.dts +++ b/dts/src/arm64/amlogic/meson-gxbb-p201.dts @@ -8,10 +8,49 @@ /dts-v1/; #include "meson-gxbb-p20x.dtsi" +#include <dt-bindings/sound/meson-aiu.h> / { compatible = "amlogic,p201", "amlogic,meson-gxbb"; model = "Amlogic Meson GXBB P201 Development Board"; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "P201"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&aiu { + status = "okay"; }; ðmac { diff --git a/dts/src/arm64/amlogic/meson-gxbb-p20x.dtsi b/dts/src/arm64/amlogic/meson-gxbb-p20x.dtsi index e803a466fe..52d57773a7 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-p20x.dtsi +++ b/dts/src/arm64/amlogic/meson-gxbb-p20x.dtsi @@ -53,21 +53,21 @@ regulator-settling-time-down-us = <150000>; }; - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; diff --git a/dts/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi b/dts/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi index 66daf3af34..255e93a0b3 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi +++ b/dts/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi @@ -21,7 +21,6 @@ spdif_dit: audio-codec-0 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; @@ -48,28 +47,28 @@ enable-active-high; }; - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - vddio_ao18: regulator-vddio_ao18 { + vddio_ao18: regulator-vddio-ao18 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; @@ -116,7 +115,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; diff --git a/dts/src/arm64/amlogic/meson-gxbb-wetek-hub.dts b/dts/src/arm64/amlogic/meson-gxbb-wetek-hub.dts index 58733017ed..af9ea32a28 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-wetek-hub.dts +++ b/dts/src/arm64/amlogic/meson-gxbb-wetek-hub.dts @@ -23,7 +23,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; diff --git a/dts/src/arm64/amlogic/meson-gxbb-wetek-play2.dts b/dts/src/arm64/amlogic/meson-gxbb-wetek-play2.dts index 505ffcd8eb..376760d867 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-wetek-play2.dts +++ b/dts/src/arm64/amlogic/meson-gxbb-wetek-play2.dts @@ -17,7 +17,6 @@ spdif_dit: audio-codec-0 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; @@ -56,7 +55,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; diff --git a/dts/src/arm64/amlogic/meson-gxbb-wetek.dtsi b/dts/src/arm64/amlogic/meson-gxbb-wetek.dtsi index 94dafb9553..deb2952271 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-wetek.dtsi +++ b/dts/src/arm64/amlogic/meson-gxbb-wetek.dtsi @@ -49,21 +49,21 @@ enable-active-high; }; - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - vddio_ao18: regulator-vddio_ao18 { + vddio_ao18: regulator-vddio-ao18 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; @@ -71,7 +71,7 @@ regulator-always-on; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; diff --git a/dts/src/arm64/amlogic/meson-gxbb.dtsi b/dts/src/arm64/amlogic/meson-gxbb.dtsi index 7c029f552a..12ef6e81c8 100644 --- a/dts/src/arm64/amlogic/meson-gxbb.dtsi +++ b/dts/src/arm64/amlogic/meson-gxbb.dtsi @@ -300,8 +300,8 @@ }; &gpio_intc { - compatible = "amlogic,meson-gpio-intc", - "amlogic,meson-gxbb-gpio-intc"; + compatible = "amlogic,meson-gxbb-gpio-intc", + "amlogic,meson-gpio-intc"; status = "okay"; }; @@ -427,6 +427,20 @@ }; }; + spi_idle_high_pins: spi-idle-high-pins { + mux { + groups = "spi_sclk"; + bias-pull-up; + }; + }; + + spi_idle_low_pins: spi-idle-low-pins { + mux { + groups = "spi_sclk"; + bias-pull-down; + }; + }; + spi_ss0_pins: spi-ss0 { mux { groups = "spi_ss0"; diff --git a/dts/src/arm64/amlogic/meson-gxl-s805x-libretech-ac.dts b/dts/src/arm64/amlogic/meson-gxl-s805x-libretech-ac.dts index 213a0705eb..90ef9c17d8 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s805x-libretech-ac.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s805x-libretech-ac.dts @@ -42,7 +42,7 @@ }; }; - dc_5v: regulator-dc_5v { + dc_5v: regulator-dc-5v { compatible = "regulator-fixed"; regulator-name = "DC_5V"; regulator-min-microvolt = <5000000>; @@ -89,7 +89,7 @@ regulator-always-on; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; @@ -98,7 +98,7 @@ regulator-always-on; }; - vddio_ao18: regulator-vddio_ao18 { + vddio_ao18: regulator-vddio-ao18 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; @@ -107,7 +107,7 @@ regulator-always-on; }; - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; @@ -130,7 +130,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; diff --git a/dts/src/arm64/amlogic/meson-gxl-s805x-p241.dts b/dts/src/arm64/amlogic/meson-gxl-s805x-p241.dts index ff906becd2..08a4718219 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s805x-p241.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s805x-p241.dts @@ -64,28 +64,28 @@ reg = <0x0 0x0 0x0 0x20000000>; }; - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - vddio_ao18: regulator-vddio_ao18 { + vddio_ao18: regulator-vddio-ao18 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; @@ -135,7 +135,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905d-phicomm-n1.dts b/dts/src/arm64/amlogic/meson-gxl-s905d-phicomm-n1.dts index 9ef210f17b..393d3cb33b 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905d-phicomm-n1.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s905d-phicomm-n1.dts @@ -18,7 +18,7 @@ leds { compatible = "gpio-leds"; - status { + led { label = "n1:white:status"; gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905d-sml5442tw.dts b/dts/src/arm64/amlogic/meson-gxl-s905d-sml5442tw.dts index b331a01357..c490dbbf06 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905d-sml5442tw.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s905d-sml5442tw.dts @@ -79,6 +79,5 @@ enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; max-speed = <2000000>; clocks = <&wifi32k>; - clock-names = "lpo"; }; }; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/dts/src/arm64/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts index 6831137c5c..2b94b6e528 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts @@ -37,28 +37,28 @@ stdout-path = "serial0:115200n8"; }; - vddio_ao18: regulator-vddio_ao18 { + vddio_ao18: regulator-vddio-ao18 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; @@ -86,11 +86,11 @@ }; &efuse { - bt_mac: bt_mac@6 { + bt_mac: bt-mac@6 { reg = <0x6 0x6>; }; - wifi_mac: wifi_mac@C { + wifi_mac: wifi-mac@c { reg = <0xc 0x6>; }; }; @@ -239,7 +239,7 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c_b_pins>; - pcf8563: pcf8563@51 { + pcf8563: rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; status = "okay"; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905x-hwacom-amazetv.dts b/dts/src/arm64/amlogic/meson-gxl-s905x-hwacom-amazetv.dts index c8d74e61de..89fe5110f7 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905x-hwacom-amazetv.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s905x-hwacom-amazetv.dts @@ -42,21 +42,21 @@ <3300000 1>; }; - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905x-khadas-vim.dts b/dts/src/arm64/amlogic/meson-gxl-s905x-khadas-vim.dts index 6ab1cc125b..fea65f2052 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -74,7 +74,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; @@ -140,7 +139,6 @@ compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; - clock-frequency = <32768>; clock-output-names = "xin32k"; }; }; @@ -219,21 +217,6 @@ &sd_emmc_a { max-frequency = <100000000>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - -&uart_A { - bluetooth { - compatible = "brcm,bcm43438-bt"; - shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - max-speed = <2000000>; - clocks = <&wifi32k>; - clock-names = "lpo"; - }; }; /* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */ diff --git a/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc-v2.dts b/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc-v2.dts index 874f91c348..63b2086006 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc-v2.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc-v2.dts @@ -67,7 +67,7 @@ reg = <0x0 0x0 0x0 0x80000000>; }; - ao_5v: regulator-ao_5v { + ao_5v: regulator-ao-5v { compatible = "regulator-fixed"; regulator-name = "AO_5V"; regulator-min-microvolt = <5000000>; @@ -76,7 +76,7 @@ regulator-always-on; }; - dc_in: regulator-dc_in { + dc_in: regulator-dc-in { compatible = "regulator-fixed"; regulator-name = "DC_IN"; regulator-min-microvolt = <5000000>; @@ -93,7 +93,7 @@ regulator-always-on; }; - vcc_card: regulator-vcc_card { + vcc_card: regulator-vcc-card { compatible = "regulator-fixed"; regulator-name = "VCC_CARD"; regulator-min-microvolt = <3300000>; @@ -114,7 +114,7 @@ gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>; }; - vddio_ao3v3: regulator-vddio_ao3v3 { + vddio_ao3v3: regulator-vddio-ao3v3 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO3V3"; regulator-min-microvolt = <3300000>; @@ -139,7 +139,7 @@ regulator-settling-time-down-us = <50000>; }; - vddio_ao18: regulator-vddio_ao18 { + vddio_ao18: regulator-vddio-ao18 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; @@ -148,7 +148,7 @@ regulator-always-on; }; - vcc_1v8: regulator-vcc_1v8 { + vcc_1v8: regulator-vcc-1v8 { compatible = "regulator-fixed"; regulator-name = "VCC 1V8"; regulator-min-microvolt = <1800000>; @@ -167,7 +167,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; @@ -305,7 +304,6 @@ }; &usb2_phy0 { - pinctrl-names = "default"; phy-supply = <&vcc5v>; }; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts b/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts index 82bfabfbd3..8b26c9661b 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -93,7 +93,7 @@ regulator-always-on; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; @@ -117,7 +117,7 @@ regulator-settling-time-down-us = <50000>; }; - vddio_ao18: regulator-vddio_ao18 { + vddio_ao18: regulator-vddio-ao18 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; @@ -125,7 +125,7 @@ }; /* This is provided by LDOs on the eMMC daugther card */ - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; @@ -149,7 +149,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/dts/src/arm64/amlogic/meson-gxl-s905x-nexbox-a95x.dts index f1acca5c44..c79f9f2099 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905x-nexbox-a95x.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s905x-nexbox-a95x.dts @@ -42,21 +42,21 @@ <3300000 1>; }; - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905x-p212.dts b/dts/src/arm64/amlogic/meson-gxl-s905x-p212.dts index 2602940c20..9b4ea6a493 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905x-p212.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s905x-p212.dts @@ -7,11 +7,19 @@ /dts-v1/; #include "meson-gxl-s905x-p212.dtsi" +#include <dt-bindings/sound/meson-aiu.h> / { compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl"; model = "Amlogic Meson GXL (S905X) P212 Development Board"; + dio2133: analog-amplifier { + compatible = "simple-audio-amplifier"; + sound-name-prefix = "AU2"; + VCC-supply = <&hdmi_5v>; + enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>; + }; + cvbs-connector { compatible = "composite-video-connector"; @@ -32,6 +40,66 @@ }; }; }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "S905X-P212"; + audio-aux-devs = <&dio2133>; + audio-widgets = "Line", "Lineout"; + audio-routing = "AU2 INL", "ACODEC LOLN", + "AU2 INR", "ACODEC LORN", + "Lineout", "AU2 OUTL", + "Lineout", "AU2 OUTR"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + + codec-1 { + sound-dai = <&aiu AIU_ACODEC CTRL_I2S>; + }; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + + dai-link-3 { + sound-dai = <&aiu AIU_ACODEC CTRL_OUT>; + + codec-0 { + sound-dai = <&acodec>; + }; + }; + }; +}; + +&acodec { + AVDD-supply = <&vddio_ao18>; + status = "okay"; +}; + +&aiu { + status = "okay"; }; &cec_AO { diff --git a/dts/src/arm64/amlogic/meson-gxl-s905x-p212.dtsi b/dts/src/arm64/amlogic/meson-gxl-s905x-p212.dtsi index 05cb2f5e5c..7e7dc87ede 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905x-p212.dtsi +++ b/dts/src/arm64/amlogic/meson-gxl-s905x-p212.dtsi @@ -39,28 +39,28 @@ regulator-always-on; }; - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - vddio_ao18: regulator-vddio_ao18 { + vddio_ao18: regulator-vddio-ao18 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; @@ -97,6 +97,14 @@ pinctrl-names = "default"; }; +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + &saradc { status = "okay"; vref-supply = <&vddio_ao18>; @@ -125,6 +133,11 @@ vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; }; /* SD card */ @@ -165,14 +178,6 @@ vqmmc-supply = <&vddio_boot>; }; -&pwm_ef { - status = "okay"; - pinctrl-0 = <&pwm_e_pins>; - pinctrl-names = "default"; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "clkin0"; -}; - /* This is connected to the Bluetooth module: */ &uart_A { status = "okay"; diff --git a/dts/src/arm64/amlogic/meson-gxl.dtsi b/dts/src/arm64/amlogic/meson-gxl.dtsi index c3ac531c4f..17bcfa4702 100644 --- a/dts/src/arm64/amlogic/meson-gxl.dtsi +++ b/dts/src/arm64/amlogic/meson-gxl.dtsi @@ -312,8 +312,8 @@ }; &gpio_intc { - compatible = "amlogic,meson-gpio-intc", - "amlogic,meson-gxl-gpio-intc"; + compatible = "amlogic,meson-gxl-gpio-intc", + "amlogic,meson-gpio-intc"; status = "okay"; }; @@ -429,6 +429,20 @@ }; }; + spi_idle_high_pins: spi-idle-high-pins { + mux { + groups = "spi_sclk"; + bias-pull-up; + }; + }; + + spi_idle_low_pins: spi-idle-low-pins { + mux { + groups = "spi_sclk"; + bias-pull-down; + }; + }; + spi_ss0_pins: spi-ss0 { mux { groups = "spi_ss0"; @@ -759,16 +773,23 @@ }; }; - eth-phy-mux { - compatible = "mdio-mux-mmioreg", "mdio-mux"; + eth_phy_mux: mdio@558 { + reg = <0x0 0x558 0x0 0xc>; + compatible = "amlogic,gxl-mdio-mux"; #address-cells = <1>; #size-cells = <0>; - reg = <0x0 0x55c 0x0 0x4>; - mux-mask = <0xffffffff>; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "ref"; mdio-parent-bus = <&mdio0>; - internal_mdio: mdio@e40908ff { - reg = <0xe40908ff>; + external_mdio: mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + internal_mdio: mdio@1 { + reg = <0x1>; #address-cells = <1>; #size-cells = <0>; @@ -779,12 +800,6 @@ max-speed = <100>; }; }; - - external_mdio: mdio@2009087f { - reg = <0x2009087f>; - #address-cells = <1>; - #size-cells = <0>; - }; }; }; diff --git a/dts/src/arm64/amlogic/meson-gxm-gt1-ultimate.dts b/dts/src/arm64/amlogic/meson-gxm-gt1-ultimate.dts new file mode 100644 index 0000000000..2c267884cc --- /dev/null +++ b/dts/src/arm64/amlogic/meson-gxm-gt1-ultimate.dts @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-gxm.dtsi" +#include "meson-gx-p23x-q20x.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + compatible = "azw,gt1-ultimate", "amlogic,s912", "amlogic,meson-gxm"; + model = "Beelink GT1 Ultimate"; + + leds { + compatible = "gpio-leds"; + + led-white { + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_POWER; + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; + default-state = "on"; + panic-indicator; + }; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "update"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <10000>; + }; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>; + pinctrl-names = "default"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; + phy-mode = "rgmii"; +}; + +&external_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_15 */ + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&ir { + linux,rc-map-name = "rc-beelink-gs1"; +}; + +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; diff --git a/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts b/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts index f43c45daf7..07e7c3bede 100644 --- a/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts +++ b/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts @@ -52,10 +52,11 @@ gpios = <&gpio GPIODV_14 GPIO_ACTIVE_HIGH &gpio GPIODV_15 GPIO_ACTIVE_HIGH>; /* Dummy RPM values since fan is optional */ - gpio-fan,speed-map = <0 0 - 1 1 - 2 2 - 3 3>; + gpio-fan,speed-map = + <0 0>, + <1 1>, + <2 2>, + <3 3>; #cooling-cells = <2>; }; @@ -111,28 +112,28 @@ regulator-always-on; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - vddio_ao18: regulator-vddio_ao18 { + vddio_ao18: regulator-vddio-ao18 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vddio_boot: regulator-vddio_boot { + vddio_boot: regulator-vddio-boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; @@ -156,7 +157,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; @@ -270,7 +270,6 @@ compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; - clock-frequency = <32768>; clock-output-names = "xin32k"; }; }; diff --git a/dts/src/arm64/amlogic/meson-gxm-minix-neo-u9h.dts b/dts/src/arm64/amlogic/meson-gxm-minix-neo-u9h.dts index b8ef3bd8b8..1703da3235 100644 --- a/dts/src/arm64/amlogic/meson-gxm-minix-neo-u9h.dts +++ b/dts/src/arm64/amlogic/meson-gxm-minix-neo-u9h.dts @@ -89,7 +89,6 @@ compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; - clock-frequency = <32768>; clock-output-names = "xin32k"; wakeup-source; }; diff --git a/dts/src/arm64/amlogic/meson-gxm-nexbox-a1.dts b/dts/src/arm64/amlogic/meson-gxm-nexbox-a1.dts index 236c0a1441..ad2dd4ad0a 100644 --- a/dts/src/arm64/amlogic/meson-gxm-nexbox-a1.dts +++ b/dts/src/arm64/amlogic/meson-gxm-nexbox-a1.dts @@ -28,7 +28,6 @@ spdif_dit: audio-codec-0 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; @@ -94,7 +93,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; diff --git a/dts/src/arm64/amlogic/meson-gxm-rbox-pro.dts b/dts/src/arm64/amlogic/meson-gxm-rbox-pro.dts index 50137aafab..d05dde8da5 100644 --- a/dts/src/arm64/amlogic/meson-gxm-rbox-pro.dts +++ b/dts/src/arm64/amlogic/meson-gxm-rbox-pro.dts @@ -37,7 +37,6 @@ spdif_dit: audio-codec-0 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; @@ -109,7 +108,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; diff --git a/dts/src/arm64/amlogic/meson-gxm-s912-libretech-pc.dts b/dts/src/arm64/amlogic/meson-gxm-s912-libretech-pc.dts index 444c249863..a66f19851a 100644 --- a/dts/src/arm64/amlogic/meson-gxm-s912-libretech-pc.dts +++ b/dts/src/arm64/amlogic/meson-gxm-s912-libretech-pc.dts @@ -14,7 +14,7 @@ "amlogic,meson-gxm"; model = "Libre Computer AML-S912-PC"; - typec2_vbus: regulator-typec2_vbus { + typec2_vbus: regulator-typec2-vbus { compatible = "regulator-fixed"; regulator-name = "TYPEC2_VBUS"; regulator-min-microvolt = <5000000>; @@ -54,6 +54,10 @@ vbus-supply = <&typec2_vbus>; status = "okay"; + + connector { + compatible = "usb-c-connector"; + }; }; }; diff --git a/dts/src/arm64/amlogic/meson-khadas-vim3.dtsi b/dts/src/arm64/amlogic/meson-khadas-vim3.dtsi index c9705941e4..e78cc9b577 100644 --- a/dts/src/arm64/amlogic/meson-khadas-vim3.dtsi +++ b/dts/src/arm64/amlogic/meson-khadas-vim3.dtsi @@ -80,7 +80,7 @@ clock-names = "ext_clock"; }; - dc_in: regulator-dc_in { + dc_in: regulator-dc-in { compatible = "regulator-fixed"; regulator-name = "DC_IN"; regulator-min-microvolt = <5000000>; @@ -88,7 +88,7 @@ regulator-always-on; }; - vcc_5v: regulator-vcc_5v { + vcc_5v: regulator-vcc-5v { compatible = "regulator-fixed"; regulator-name = "VCC_5V"; regulator-min-microvolt = <5000000>; @@ -99,7 +99,7 @@ enable-active-high; }; - vcc_1v8: regulator-vcc_1v8 { + vcc_1v8: regulator-vcc-1v8 { compatible = "regulator-fixed"; regulator-name = "VCC_1V8"; regulator-min-microvolt = <1800000>; @@ -108,7 +108,7 @@ regulator-always-on; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; @@ -118,7 +118,7 @@ /* FIXME: actually controlled by VDDCPU_B_EN */ }; - vddao_1v8: regulator-vddao_1v8 { + vddao_1v8: regulator-vddao-1v8 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO1V8"; regulator-min-microvolt = <1800000>; @@ -127,7 +127,7 @@ regulator-always-on; }; - emmc_1v8: regulator-emmc_1v8 { + emmc_1v8: regulator-emmc-1v8 { compatible = "regulator-fixed"; regulator-name = "EMMC_AO1V8"; regulator-min-microvolt = <1800000>; @@ -136,7 +136,7 @@ regulator-always-on; }; - vsys_3v3: regulator-vsys_3v3 { + vsys_3v3: regulator-vsys-3v3 { compatible = "regulator-fixed"; regulator-name = "VSYS_3V3"; regulator-min-microvolt = <3300000>; @@ -145,7 +145,7 @@ regulator-always-on; }; - usb_pwr: regulator-usb_pwr { + usb_pwr: regulator-usb-pwr { compatible = "regulator-fixed"; regulator-name = "USB_PWR"; regulator-min-microvolt = <5000000>; @@ -189,7 +189,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&frddr_a>; diff --git a/dts/src/arm64/amlogic/meson-libretech-cottonwood.dtsi b/dts/src/arm64/amlogic/meson-libretech-cottonwood.dtsi new file mode 100644 index 0000000000..082b72703c --- /dev/null +++ b/dts/src/arm64/amlogic/meson-libretech-cottonwood.dtsi @@ -0,0 +1,614 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 BayLibre, SAS. + * Author: Jerome Brunet <jbrunet@baylibre.com> + */ + +#include <dt-bindings/clock/g12a-clkc.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-toacodec.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + spi0 = &spifc; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + dioo2133: audio-amplifier-0 { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio GPIOX_0 GPIO_ACTIVE_HIGH>; + VCC-supply = <&vcc_5v>; + sound-name-prefix = "10U2"; + }; + + /* TOFIX: handle CVBS_DET on SARADC channel 0 */ + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + led-blue { + compatible = "pwm-leds"; + + led { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_ACTIVITY; + linux,default-trigger = "heartbeat"; + max-brightness = <255>; + pwms = <&pwm_ab 1 1250 0>; + active-low; + }; + }; + + led-green { + compatible = "pwm-leds"; + + led { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + linux,default-trigger = "default-on"; + max-brightness = <255>; + pwms = <&pwm_cd 1 1250 0>; + active-low; + }; + }; + + led-orange { + compatible = "gpio-leds"; + + led { + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_STANDBY; + gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + panic-indicator; + }; + }; + + dc_in: regulator-dc-in { + compatible = "regulator-fixed"; + regulator-name = "5V_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + flash_1v8: regulator-flash-1v8 { + compatible = "regulator-fixed"; + regulator-name = "FLASH_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <&vcc_3v3>; + }; + + vcc_card: regulator-vcc-card { + compatible = "regulator-fixed"; + regulator-name = "VCC_CARD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + gpio = <&gpio GPIOX_2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + enable-active-high; + gpio-open-drain; + }; + + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&vddao_3v3>; + + /* FIXME: controlled by TEST_N */ + }; + + vcc_5v: regulator-vcc-5v { + compatible = "regulator-fixed"; + regulator-name = "VCC_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&dc_in>; + gpio = <&gpio GPIOH_8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + enable-active-high; + gpio-open-drain; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&dc_in>; + }; + + vddcpu_b: regulator-vddcpu-b { + compatible = "pwm-regulator"; + regulator-name = "VDDCPU_B"; + regulator-min-microvolt = <730000>; + regulator-max-microvolt = <1011000>; + regulator-boot-on; + regulator-always-on; + pwm-supply = <&dc_in>; + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + }; + + vddio_ao18: regulator-vddio-ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <&vddao_3v3>; + }; + + vddio_c: regulator-vddio-c { + compatible = "regulator-gpio"; + regulator-name = "VDDIO_C"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-settling-time-up-us = <200>; + regulator-settling-time-down-us = <50000>; + vin-supply = <&vddao_3v3>; + gpios = <&gpio GPIOX_4 GPIO_ACTIVE_HIGH>; + states = <3300000 0>, + <1800000 1>; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + audio-widgets = "Line", "Lineout"; + audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmout_c>, + <&tdmin_a>, <&tdmin_b>, <&tdmin_c>, + <&dioo2133>; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + dai-link-3 { + sound-dai = <&toddr_a>; + }; + + dai-link-4 { + sound-dai = <&toddr_b>; + }; + + dai-link-5 { + sound-dai = <&toddr_c>; + }; + + /* + * Audio setup: The 40 pins header provides access to 2 TDMs, + * SPDIF In/Out and PDM inputs. + * - TDM A: 2 lanes + * D0: 40/X9 + * D1: 38/X8 + * BCLK: 12/X11 + * FS: 35/X10 + * - TDM B: 4 lanes + * D0: 37/A3 + * D1: 16/A4 + * D2: 18/A5 or 7/AO6 + * D3: 22/A6 or 21/H5 + * BCLK: 29/A1 or 8/AO8 + * FS: 31/A2 or 11/AO7 + * - 2 Master Clocks: + * MCLK0: 15/A0 or 10/AO9 + * MCLK1: 33/X15 + * - SPDIF: + * OUT: 32/A11 + * IN: 21/H5 + * - PDM Input: + * DO: 13/A8 + * D1: 26/A9 + * D2: 22/A6 + * D3: 18/A5 + * DCLK: 36/A7 + * + * TDM C is not usable on the 40 pins connector so it is + * setup for the HDMI 4 lanes i2s. + * + * No pinctrl is enabled by default to preserve the + * genericity of the 40 pins header. Many configurations are + * possible based on the desired use case. Please adjust TDM + * masks, clock setups and pinctrl accordingly. + */ + + dai-link-6 { + sound-dai = <&tdmif_a>; + dai-format = "dsp_a"; + dai-tdm-slot-tx-mask-0 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; + }; + + codec-1 { + sound-dai = <&toacodec TOACODEC_IN_A>; + }; + }; + + dai-link-7 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-rx-mask-1 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + + codec-1 { + sound-dai = <&toacodec TOACODEC_IN_B>; + }; + }; + + dai-link-8 { + sound-dai = <&tdmif_c>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>; + }; + + codec-1 { + sound-dai = <&toacodec TOACODEC_IN_C>; + }; + }; + + dai-link-9 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + + dai-link-10 { + sound-dai = <&toacodec TOACODEC_OUT>; + + codec { + sound-dai = <&acodec>; + }; + }; + }; +}; + +&acodec { + status = "okay"; + AVDD-supply = <&vddio_ao18>; +}; + +&arb { + status = "okay"; +}; + +&cecb_AO { + status = "okay"; + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + +&clkc_audio { + status = "okay"; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +&dwc3 { + #address-cells = <1>; + #size-cells = <0>; + + hub: hub@1 { + compatible = "usb5e3,626"; + reg = <1>; + reset-gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + vdd-supply = <&vcc_5v>; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>, <ð_phy_irq_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <100000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&periphs_pinctrl { + spi_cs_disable_pins: spi-cs-disable { + mux { + groups = "BOOT_14"; + function = "gpio_periphs"; + bias-disable; + output-high; + }; + }; + + eth_phy_irq_pins: eth-phy-irq { + mux { + groups = "GPIOZ_14"; + function = "gpio_periphs"; + bias-pull-up; + output-disable; + }; + }; +}; + +&pwm_AO_cd { + status = "okay"; + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; +}; + +&pwm_ab { + status = "okay"; + pinctrl-0 = <&pwm_b_x7_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; +}; + +&pwm_cd { + status = "okay"; + pinctrl-0 = <&pwm_d_x3_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + max-frequency = <200000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vcc_card>; + vqmmc-supply = <&vddio_c>; +}; + +/* + * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR CS + * and eMMC Data 4 to 7 pins. + * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0, + * and change bus-width to 4 then spifc can be enabled. + */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>, + <&spi_cs_disable_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&flash_1v8>; +}; + +&spifc { + status = "disabled"; + pinctrl-0 = <&nor_pins>; + pinctrl-names = "default"; + cs-gpios = <&gpio BOOT_14 GPIO_ACTIVE_LOW>; + + w25lq128d: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <80000000>; + }; +}; + +&tdmif_a { + status = "okay"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmif_c { + status = "okay"; +}; + +&tdmin_a { + status = "okay"; +}; + +&tdmin_b { + status = "okay"; +}; + +&tdmin_c { + status = "okay"; +}; + +&tdmout_a { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tdmout_c { + status = "okay"; +}; + +&toacodec { + status = "okay"; +}; + +&toddr_a { + status = "okay"; +}; + +&toddr_b { + status = "okay"; +}; + +&toddr_c { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb2_phy1 { + phy-supply = <&dc_in>; +}; + +&usb3_pcie_phy { + phy-supply = <&vcc_5v>; +}; + +&usb { + status = "okay"; +}; diff --git a/dts/src/arm64/amlogic/meson-s4-s805x2-aq222.dts b/dts/src/arm64/amlogic/meson-s4-s805x2-aq222.dts index 8ffbcb2b1a..983caddc40 100644 --- a/dts/src/arm64/amlogic/meson-s4-s805x2-aq222.dts +++ b/dts/src/arm64/amlogic/meson-s4-s805x2-aq222.dts @@ -15,7 +15,7 @@ #size-cells = <2>; aliases { - serial0 = &uart_B; + serial0 = &uart_b; }; memory@0 { @@ -23,8 +23,70 @@ reg = <0x0 0x0 0x0 0x40000000>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 52 MiB reserved for ARM Trusted Firmware */ + secmon_reserved: secmon@5000000 { + reg = <0x0 0x05000000 0x0 0x3400000>; + no-map; + }; + }; +}; + +&uart_b { + status = "okay"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_pins>; + pinctrl-names = "default"; +}; + +&nand { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + nand-on-flash-bbt; + + partition@0 { + label = "boot"; + reg = <0x0 0x00200000>; + }; + partition@200000 { + label = "env"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "system"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "rootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "media"; + reg = <0x04000000 0x8000000>; + }; + }; }; -&uart_B { +&spicc0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spicc0_pins_x>; + cs-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>; }; diff --git a/dts/src/arm64/amlogic/meson-s4.dtsi b/dts/src/arm64/amlogic/meson-s4.dtsi index ad50cba42d..ce90b35686 100644 --- a/dts/src/arm64/amlogic/meson-s4.dtsi +++ b/dts/src/arm64/amlogic/meson-s4.dtsi @@ -6,6 +6,10 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/gpio/meson-s4-gpio.h> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> +#include <dt-bindings/power/meson-s4-power.h> / { cpus { @@ -85,13 +89,51 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; - apb4: apb4@fe000000 { + apb4: bus@fe000000 { compatible = "simple-bus"; reg = <0x0 0xfe000000 0x0 0x480000>; #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + clkc_periphs: clock-controller@0 { + compatible = "amlogic,s4-peripherals-clkc"; + reg = <0x0 0x0 0x0 0x49c>; + clocks = <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_FCLK_DIV2P5>, + <&clkc_pll CLKID_FCLK_DIV3>, + <&clkc_pll CLKID_FCLK_DIV4>, + <&clkc_pll CLKID_FCLK_DIV5>, + <&clkc_pll CLKID_FCLK_DIV7>, + <&clkc_pll CLKID_HIFI_PLL>, + <&clkc_pll CLKID_GP0_PLL>, + <&clkc_pll CLKID_MPLL0>, + <&clkc_pll CLKID_MPLL1>, + <&clkc_pll CLKID_MPLL2>, + <&clkc_pll CLKID_MPLL3>, + <&clkc_pll CLKID_HDMI_PLL>, + <&xtal>; + clock-names = "fclk_div2", "fclk_div2p5", "fclk_div3", + "fclk_div4", "fclk_div5", "fclk_div7", + "hifi_pll", "gp0_pll", "mpll0", "mpll1", + "mpll2", "mpll3", "hdmi_pll", "xtal"; + #clock-cells = <1>; + }; + + clkc_pll: clock-controller@8000 { + compatible = "amlogic,s4-pll-clkc"; + reg = <0x0 0x8000 0x0 0x1e8>; + clocks = <&xtal>; + clock-names = "xtal"; + #clock-cells = <1>; + }; + + watchdog@2100 { + compatible = "amlogic,s4-wdt", "amlogic,t7-wdt"; + reg = <0x0 0x2100 0x0 0x10>; + clocks = <&xtal>; + }; + periphs_pinctrl: pinctrl@4000 { compatible = "amlogic,meson-s4-periphs-pinctrl"; #address-cells = <2>; @@ -106,6 +148,195 @@ #gpio-cells = <2>; gpio-ranges = <&periphs_pinctrl 0 0 82>; }; + + remote_pins: remote-pin { + mux { + groups = "remote_in"; + function = "remote_in"; + bias-disable; + }; + }; + + i2c0_pins1: i2c0-pins1 { + mux { + groups = "i2c0_sda", + "i2c0_scl"; + function = "i2c0"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c1_pins1: i2c1-pins1 { + mux { + groups = "i2c1_sda_c", + "i2c1_scl_c"; + function = "i2c1"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c1_pins2: i2c1-pins2 { + mux { + groups = "i2c1_sda_d", + "i2c1_scl_d"; + function = "i2c1"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c1_pins3: i2c1-pins3 { + mux { + groups = "i2c1_sda_h", + "i2c1_scl_h"; + function = "i2c1"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c1_pins4: i2c1-pins4 { + mux { + groups = "i2c1_sda_x", + "i2c1_scl_x"; + function = "i2c1"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c2_pins1: i2c2-pins1 { + mux { + groups = "i2c2_sda_d", + "i2c2_scl_d"; + function = "i2c2"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c2_pins2: i2c2-pins2 { + mux { + groups = "i2c2_sda_h8", + "i2c2_scl_h9"; + function = "i2c2"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c2_pins3: i2c2-pins3 { + mux { + groups = "i2c2_sda_h0", + "i2c2_scl_h1"; + function = "i2c2"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c3_pins1: i2c3-pins1 { + mux { + groups = "i2c3_sda_x", + "i2c3_scl_x"; + function = "i2c3"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c3_pins2: i2c3-pins2 { + mux { + groups = "i2c3_sda_z", + "i2c3_scl_z"; + function = "i2c3"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c4_pins1: i2c4-pins1 { + mux { + groups = "i2c4_sda_c", + "i2c4_scl_c"; + function = "i2c4"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c4_pins2: i2c4-pins2 { + mux { + groups = "i2c4_sda_d", + "i2c4_scl_d"; + function = "i2c4"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c4_pins3: i2c4-pins3 { + mux { + groups = "i2c4_sda_z", + "i2c4_scl_z"; + function = "i2c4"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + nand_pins: nand-pins { + mux { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7", + "nand_ce0", + "nand_ale", + "nand_cle", + "nand_wen_clk", + "nand_ren_wr"; + function = "nand"; + input-enable; + }; + }; + + spicc0_pins_x: spicc0-pins_x { + mux { + groups = "spi_a_mosi_x", + "spi_a_miso_x", + "spi_a_clk_x"; + function = "spi_a"; + drive-strength-microamp = <3000>; + }; + }; + + spicc0_pins_h: spicc0-pins-h { + mux { + groups = "spi_a_mosi_h", + "spi_a_miso_h", + "spi_a_clk_h"; + function = "spi_a"; + drive-strength-microamp = <3000>; + }; + }; + + spicc0_pins_z: spicc0-pins-z { + mux { + groups = "spi_a_mosi_z", + "spi_a_miso_z", + "spi_a_clk_z"; + function = "spi_a"; + drive-strength-microamp = <3000>; + }; + }; + }; gpio_intc: interrupt-controller@4080 { @@ -118,14 +349,120 @@ <10 11 12 13 14 15 16 17 18 19 20 21>; }; - uart_B: serial@7a000 { + eth_phy: mdio-multiplexer@28000 { + compatible = "amlogic,g12a-mdio-mux"; + reg = <0x0 0x28000 0x0 0xa4>; + + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_ETHPHY>, + <&xtal>, + <&clkc_pll CLKID_MPLL_50M>; + clock-names = "pclk", "clkin0", "clkin1"; + mdio-parent-bus = <&mdio0>; + + ext_mdio: mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + int_mdio: mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + internal_ephy: ethernet-phy@8 { + compatible = "ethernet-phy-id0180.3301", + "ethernet-phy-ieee802.3-c22"; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + reg = <8>; + max-speed = <100>; + }; + }; + }; + + spicc0: spi@50000 { + compatible = "amlogic,meson-g12a-spicc"; + reg = <0x0 0x50000 0x0 0x44>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc_periphs CLKID_SPICC0>, + <&clkc_periphs CLKID_SPICC0_EN>; + clock-names = "core", "pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c0: i2c@66000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x66000 0x0 0x20>; + interrupts = <GIC_SPI 160 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_A>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@68000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x68000 0x0 0x20>; + interrupts = <GIC_SPI 161 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_B>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@6a000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x6a000 0x0 0x20>; + interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@6c000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x6c000 0x0 0x20>; + interrupts = <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_D>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@6e000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x6e000 0x0 0x20>; + interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_E>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + nand: nand-controller@8c800 { + compatible = "amlogic,meson-axg-nfc"; + reg = <0x0 0x8c800 0x0 0x100>, <0x0 0x8c000 0x0 0x4>; + reg-names = "nfc", "emmc"; + interrupts = <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_SD_EMMC_C>, + <&clkc_pll CLKID_FCLK_DIV2>; + clock-names = "core", "device"; + status = "disabled"; + }; + + uart_b: serial@7a000 { compatible = "amlogic,meson-s4-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x7a000 0x0 0x18>; interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&xtal>, <&xtal>, <&xtal>; + clocks = <&xtal>, <&clkc_periphs CLKID_UART_B>, <&xtal>; clock-names = "xtal", "pclk", "baud"; + status = "disabled"; }; reset: reset-controller@2000 { @@ -133,6 +470,43 @@ reg = <0x0 0x2000 0x0 0x98>; #reset-cells = <1>; }; + + ir: ir@84040 { + compatible = "amlogic,meson-s4-ir"; + reg = <0x0 0x84040 0x0 0x30>; + interrupts = <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + hwrng: rng@440788 { + compatible = "amlogic,meson-s4-rng"; + reg = <0x0 0x440788 0x0 0x0c>; + }; + }; + + ethmac: ethernet@fdc00000 { + compatible = "amlogic,meson-axg-dwmac", + "snps,dwmac-3.70a", + "snps,dwmac"; + reg = <0x0 0xfdc00000 0x0 0x10000>, + <0x0 0xfe024000 0x0 0x8>; + + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + power-domains = <&pwrc PWRC_S4_ETH_ID>; + clocks = <&clkc_periphs CLKID_ETH>, + <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; + rx-fifo-depth = <4096>; + tx-fifo-depth = <2048>; + status = "disabled"; + + mdio0: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; }; }; }; diff --git a/dts/src/arm64/amlogic/meson-sm1-a95xf3-air-gbit.dts b/dts/src/arm64/amlogic/meson-sm1-a95xf3-air-gbit.dts index d1debccdc1..9b2eb6e426 100644 --- a/dts/src/arm64/amlogic/meson-sm1-a95xf3-air-gbit.dts +++ b/dts/src/arm64/amlogic/meson-sm1-a95xf3-air-gbit.dts @@ -29,7 +29,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&frddr_a>; @@ -100,7 +99,7 @@ interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/dts/src/arm64/amlogic/meson-sm1-a95xf3-air.dts b/dts/src/arm64/amlogic/meson-sm1-a95xf3-air.dts index c94f2870b7..6e34fd80ed 100644 --- a/dts/src/arm64/amlogic/meson-sm1-a95xf3-air.dts +++ b/dts/src/arm64/amlogic/meson-sm1-a95xf3-air.dts @@ -29,7 +29,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&frddr_a>; diff --git a/dts/src/arm64/amlogic/meson-sm1-ac2xx.dtsi b/dts/src/arm64/amlogic/meson-sm1-ac2xx.dtsi index 46a34731f7..d1fa8b8bf7 100644 --- a/dts/src/arm64/amlogic/meson-sm1-ac2xx.dtsi +++ b/dts/src/arm64/amlogic/meson-sm1-ac2xx.dtsi @@ -54,7 +54,7 @@ reg = <0x0 0x0 0x0 0x40000000>; }; - ao_5v: regulator-ao_5v { + ao_5v: regulator-ao-5v { compatible = "regulator-fixed"; regulator-name = "AO_5V"; regulator-min-microvolt = <5000000>; @@ -63,7 +63,7 @@ regulator-always-on; }; - dc_in: regulator-dc_in { + dc_in: regulator-dc-in { compatible = "regulator-fixed"; regulator-name = "DC_IN"; regulator-min-microvolt = <5000000>; @@ -71,7 +71,7 @@ regulator-always-on; }; - emmc_1v8: regulator-emmc_1v8 { + emmc_1v8: regulator-emmc-1v8 { compatible = "regulator-fixed"; regulator-name = "EMMC_1V8"; regulator-min-microvolt = <1800000>; @@ -80,7 +80,7 @@ regulator-always-on; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; @@ -105,7 +105,7 @@ regulator-always-on; }; - vddio_ao1v8: regulator-vddio_ao1v8 { + vddio_ao1v8: regulator-vddio-ao1v8 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO1V8"; regulator-min-microvolt = <1800000>; diff --git a/dts/src/arm64/amlogic/meson-sm1-bananapi-m2-pro.dts b/dts/src/arm64/amlogic/meson-sm1-bananapi-m2-pro.dts new file mode 100644 index 0000000000..586034316e --- /dev/null +++ b/dts/src/arm64/amlogic/meson-sm1-bananapi-m2-pro.dts @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 BayLibre SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +/dts-v1/; + +#include "meson-sm1-bananapi.dtsi" +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "bananapi,bpi-m2-pro", "amlogic,sm1"; + model = "Banana Pi BPI-M2-PRO"; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "BPI-M2-PRO"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&clkc_audio { + status = "okay"; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; diff --git a/dts/src/arm64/amlogic/meson-sm1-bananapi-m5.dts b/dts/src/arm64/amlogic/meson-sm1-bananapi-m5.dts index cadba194b1..f045bf8516 100644 --- a/dts/src/arm64/amlogic/meson-sm1-bananapi-m5.dts +++ b/dts/src/arm64/amlogic/meson-sm1-bananapi-m5.dts @@ -6,10 +6,7 @@ /dts-v1/; -#include "meson-sm1.dtsi" -#include <dt-bindings/leds/common.h> -#include <dt-bindings/input/linux-event-codes.h> -#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include "meson-sm1-bananapi.dtsi" #include <dt-bindings/sound/meson-g12a-toacodec.h> #include <dt-bindings/sound/meson-g12a-tohdmitx.h> @@ -17,28 +14,6 @@ compatible = "bananapi,bpi-m5", "amlogic,sm1"; model = "Banana Pi BPI-M5"; - adc_keys { - compatible = "adc-keys"; - io-channels = <&saradc 2>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1800000>; - - key { - label = "SW3"; - linux,code = <BTN_3>; - press-threshold-microvolt = <1700000>; - }; - }; - - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - /* TOFIX: handle CVBS_DET on SARADC channel 0 */ cvbs-connector { compatible = "composite-video-connector"; @@ -50,150 +25,6 @@ }; }; - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; - }; - - gpio-keys { - compatible = "gpio-keys"; - - key { - label = "SW1"; - linux,code = <BTN_1>; - gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>; - interrupt-parent = <&gpio_intc>; - interrupts = <3 IRQ_TYPE_EDGE_BOTH>; - }; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - green { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_STATUS; - gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; - }; - - blue { - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_STATUS; - gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_LOW>; - linux,default-trigger = "heartbeat"; - }; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - emmc_1v8: regulator-emmc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "EMMC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - dc_in: regulator-dc_in { - compatible = "regulator-fixed"; - regulator-name = "DC_IN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - vddio_c: regulator-vddio_c { - compatible = "regulator-gpio"; - regulator-name = "VDDIO_C"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - enable-gpio = <&gpio_ao GPIOE_2 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - - gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_DRAIN>; - gpios-states = <1>; - - states = <1800000 0>, - <3300000 1>; - }; - - tflash_vdd: regulator-tflash_vdd { - compatible = "regulator-fixed"; - regulator-name = "TFLASH_VDD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_in>; - gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-high; - regulator-always-on; - }; - - vddao_1v8: regulator-vddao_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_in>; - regulator-always-on; - }; - - vddcpu: regulator-vddcpu { - /* - * SY8120B1ABC DC/DC Regulator. - */ - compatible = "pwm-regulator"; - - regulator-name = "VDDCPU"; - regulator-min-microvolt = <690000>; - regulator-max-microvolt = <1050000>; - - pwm-supply = <&dc_in>; - - pwms = <&pwm_AO_cd 1 1250 0>; - pwm-dutycycle-range = <100 0>; - - regulator-boot-on; - regulator-always-on; - }; - - /* USB Hub Power Enable */ - vl_pwr_en: regulator-vl_pwr_en { - compatible = "regulator-fixed"; - regulator-name = "VL_PWR_EN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_in>; - - gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - sound { compatible = "amlogic,axg-sound-card"; model = "BPI-M5"; @@ -233,7 +64,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&frddr_a>; @@ -319,68 +149,17 @@ status = "okay"; }; -&arb { - status = "okay"; -}; &clkc_audio { status = "okay"; }; -&cpu0 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU_CLK>; - clock-latency = <50000>; -}; - -&cpu1 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU1_CLK>; - clock-latency = <50000>; -}; - -&cpu2 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU2_CLK>; - clock-latency = <50000>; -}; - -&cpu3 { - cpu-supply = <&vddcpu>; - operating-points-v2 = <&cpu_opp_table>; - clocks = <&clkc CLKID_CPU3_CLK>; - clock-latency = <50000>; -}; - &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; }; }; -&ext_mdio { - external_phy: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; - max-speed = <1000>; - - interrupt-parent = <&gpio_intc>; - /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -ðmac { - pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-mode = "rgmii-txid"; - phy-handle = <&external_phy>; -}; - &frddr_a { status = "okay"; }; @@ -393,192 +172,6 @@ status = "okay"; }; -&gpio { - gpio-line-names = - /* GPIOZ */ - "ETH_MDIO", /* GPIOZ_0 */ - "ETH_MDC", /* GPIOZ_1 */ - "ETH_RXCLK", /* GPIOZ_2 */ - "ETH_RX_DV", /* GPIOZ_3 */ - "ETH_RXD0", /* GPIOZ_4 */ - "ETH_RXD1", /* GPIOZ_5 */ - "ETH_RXD2", /* GPIOZ_6 */ - "ETH_RXD3", /* GPIOZ_7 */ - "ETH_TXCLK", /* GPIOZ_8 */ - "ETH_TXEN", /* GPIOZ_9 */ - "ETH_TXD0", /* GPIOZ_10 */ - "ETH_TXD1", /* GPIOZ_11 */ - "ETH_TXD2", /* GPIOZ_12 */ - "ETH_TXD3", /* GPIOZ_13 */ - "ETH_INTR", /* GPIOZ_14 */ - "ETH_NRST", /* GPIOZ_15 */ - /* GPIOH */ - "HDMI_SDA", /* GPIOH_0 */ - "HDMI_SCL", /* GPIOH_1 */ - "HDMI_HPD", /* GPIOH_2 */ - "HDMI_CEC", /* GPIOH_3 */ - "VL-RST_N", /* GPIOH_4 */ - "CON1-P36", /* GPIOH_5 */ - "VL-PWREN", /* GPIOH_6 */ - "WiFi_3V3_1V8", /* GPIOH_7 */ - "TFLASH_VDD_EN", /* GPIOH_8 */ - /* BOOT */ - "eMMC_D0", /* BOOT_0 */ - "eMMC_D1", /* BOOT_1 */ - "eMMC_D2", /* BOOT_2 */ - "eMMC_D3", /* BOOT_3 */ - "eMMC_D4", /* BOOT_4 */ - "eMMC_D5", /* BOOT_5 */ - "eMMC_D6", /* BOOT_6 */ - "eMMC_D7", /* BOOT_7 */ - "eMMC_CLK", /* BOOT_8 */ - "", - "eMMC_CMD", /* BOOT_10 */ - "", - "eMMC_RST#", /* BOOT_12 */ - "eMMC_DS", /* BOOT_13 */ - "", "", - /* GPIOC */ - "SD_D0_B", /* GPIOC_0 */ - "SD_D1_B", /* GPIOC_1 */ - "SD_D2_B", /* GPIOC_2 */ - "SD_D3_B", /* GPIOC_3 */ - "SD_CLK_B", /* GPIOC_4 */ - "SD_CMD_B", /* GPIOC_5 */ - "CARD_EN_DET", /* GPIOC_6 */ - "", - /* GPIOA */ - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", - "CON1-P27", /* GPIOA_14 */ - "CON1-P28", /* GPIOA_15 */ - /* GPIOX */ - "CON1-P16", /* GPIOX_0 */ - "CON1-P18", /* GPIOX_1 */ - "CON1-P22", /* GPIOX_2 */ - "CON1-P11", /* GPIOX_3 */ - "CON1-P13", /* GPIOX_4 */ - "CON1-P07", /* GPIOX_5 */ - "CON1-P33", /* GPIOX_6 */ - "CON1-P15", /* GPIOX_7 */ - "CON1-P19", /* GPIOX_8 */ - "CON1-P21", /* GPIOX_9 */ - "CON1-P24", /* GPIOX_10 */ - "CON1-P23", /* GPIOX_11 */ - "CON1-P08", /* GPIOX_12 */ - "CON1-P10", /* GPIOX_13 */ - "CON1-P29", /* GPIOX_14 */ - "CON1-P31", /* GPIOX_15 */ - "CON1-P26", /* GPIOX_16 */ - "CON1-P03", /* GPIOX_17 */ - "CON1-P05", /* GPIOX_18 */ - "CON1-P32"; /* GPIOX_19 */ - - /* - * WARNING: The USB Hub on the BPI-M5 needs a reset signal - * to be turned high in order to be detected by the USB Controller - * This signal should be handled by a USB specific power sequence - * in order to reset the Hub when USB bus is powered down. - */ - usb-hub { - gpio-hog; - gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "usb-hub-reset"; - }; -}; - -&gpio_ao { - gpio-line-names = - /* GPIOAO */ - "DEBUG TX", /* GPIOAO_0 */ - "DEBUG RX", /* GPIOAO_1 */ - "SYS_LED2", /* GPIOAO_2 */ - "UPDATE_KEY", /* GPIOAO_3 */ - "CON1-P40", /* GPIOAO_4 */ - "IR_IN", /* GPIOAO_5 */ - "TF_3V3N_1V8_EN", /* GPIOAO_6 */ - "CON1-P35", /* GPIOAO_7 */ - "CON1-P12", /* GPIOAO_8 */ - "CON1-P37", /* GPIOAO_9 */ - "CON1-P38", /* GPIOAO_10 */ - "SYS_LED", /* GPIOAO_11 */ - /* GPIOE */ - "VDDEE_PWM", /* GPIOE_0 */ - "VDDCPU_PWM", /* GPIOE_1 */ - "TF_PWR_EN"; /* GPIOE_2 */ -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; - pinctrl-names = "default"; - hdmi-supply = <&dc_in>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&pwm_AO_cd { - pinctrl-0 = <&pwm_ao_d_e_pins>; - pinctrl-names = "default"; - clocks = <&xtal>; - clock-names = "clkin1"; - status = "okay"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddao_1v8>; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_c_pins>; - pinctrl-1 = <&sdcard_clk_gate_c_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - /* TOFIX: SD card is barely usable in SDR modes */ - - cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&tflash_vdd>; - vqmmc-supply = <&vddio_c>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&emmc_1v8>; -}; - &tdmif_b { status = "okay"; }; @@ -626,22 +219,3 @@ &toddr_c { status = "okay"; }; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; -}; - -&usb2_phy0 { - phy-supply = <&dc_in>; -}; - -&usb2_phy1 { - /* Enable the hub which is connected to this port */ - phy-supply = <&vl_pwr_en>; -}; diff --git a/dts/src/arm64/amlogic/meson-sm1-bananapi.dtsi b/dts/src/arm64/amlogic/meson-sm1-bananapi.dtsi new file mode 100644 index 0000000000..81dce86290 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-sm1-bananapi.dtsi @@ -0,0 +1,435 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 BayLibre SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#include "meson-sm1.dtsi" +#include <dt-bindings/leds/common.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> + +/ { + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 2>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + + button-sw3 { + label = "SW3"; + linux,code = <BTN_3>; + press-threshold-microvolt = <1700000>; + }; + }; + + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key { + label = "SW1"; + linux,code = <BTN_1>; + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; + interrupts = <IRQID_GPIOAO_3 IRQ_TYPE_EDGE_BOTH>; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-green { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + + led-blue { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + emmc_1v8: regulator-emmc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "EMMC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + dc_in: regulator-dc-in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vddio_c: regulator-vddio-c { + compatible = "regulator-gpio"; + regulator-name = "VDDIO_C"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + enable-gpios = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>; + enable-active-high; + regulator-always-on; + + gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_DRAIN>; + gpios-states = <1>; + + states = <1800000 0>, + <3300000 1>; + }; + + tflash_vdd: regulator-tflash-vdd { + compatible = "regulator-fixed"; + regulator-name = "TFLASH_VDD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_in>; + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; + regulator-always-on; + }; + + vddao_1v8: regulator-vddao-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + vddcpu: regulator-vddcpu { + /* + * SY8120B1ABC DC/DC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <690000>; + regulator-max-microvolt = <1050000>; + + pwm-supply = <&dc_in>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + /* USB Hub Power Enable */ + vl_pwr_en: regulator-vl-pwr-en { + compatible = "regulator-fixed"; + regulator-name = "VL_PWR_EN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_in>; + + gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&arb { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU1_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU2_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU3_CLK>; + clock-latency = <50000>; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii-txid"; + phy-handle = <&external_phy>; +}; + +&gpio { + gpio-line-names = + /* GPIOZ */ + "ETH_MDIO", /* GPIOZ_0 */ + "ETH_MDC", /* GPIOZ_1 */ + "ETH_RXCLK", /* GPIOZ_2 */ + "ETH_RX_DV", /* GPIOZ_3 */ + "ETH_RXD0", /* GPIOZ_4 */ + "ETH_RXD1", /* GPIOZ_5 */ + "ETH_RXD2", /* GPIOZ_6 */ + "ETH_RXD3", /* GPIOZ_7 */ + "ETH_TXCLK", /* GPIOZ_8 */ + "ETH_TXEN", /* GPIOZ_9 */ + "ETH_TXD0", /* GPIOZ_10 */ + "ETH_TXD1", /* GPIOZ_11 */ + "ETH_TXD2", /* GPIOZ_12 */ + "ETH_TXD3", /* GPIOZ_13 */ + "ETH_INTR", /* GPIOZ_14 */ + "ETH_NRST", /* GPIOZ_15 */ + /* GPIOH */ + "HDMI_SDA", /* GPIOH_0 */ + "HDMI_SCL", /* GPIOH_1 */ + "HDMI_HPD", /* GPIOH_2 */ + "HDMI_CEC", /* GPIOH_3 */ + "VL-RST_N", /* GPIOH_4 */ + "CON1-P36", /* GPIOH_5 */ + "VL-PWREN", /* GPIOH_6 */ + "WiFi_3V3_1V8", /* GPIOH_7 */ + "TFLASH_VDD_EN", /* GPIOH_8 */ + /* BOOT */ + "eMMC_D0", /* BOOT_0 */ + "eMMC_D1", /* BOOT_1 */ + "eMMC_D2", /* BOOT_2 */ + "eMMC_D3", /* BOOT_3 */ + "eMMC_D4", /* BOOT_4 */ + "eMMC_D5", /* BOOT_5 */ + "eMMC_D6", /* BOOT_6 */ + "eMMC_D7", /* BOOT_7 */ + "eMMC_CLK", /* BOOT_8 */ + "", + "eMMC_CMD", /* BOOT_10 */ + "", + "eMMC_RST#", /* BOOT_12 */ + "eMMC_DS", /* BOOT_13 */ + "", "", + /* GPIOC */ + "SD_D0_B", /* GPIOC_0 */ + "SD_D1_B", /* GPIOC_1 */ + "SD_D2_B", /* GPIOC_2 */ + "SD_D3_B", /* GPIOC_3 */ + "SD_CLK_B", /* GPIOC_4 */ + "SD_CMD_B", /* GPIOC_5 */ + "CARD_EN_DET", /* GPIOC_6 */ + "", + /* GPIOA */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", + "CON1-P27", /* GPIOA_14 */ + "CON1-P28", /* GPIOA_15 */ + /* GPIOX */ + "CON1-P16", /* GPIOX_0 */ + "CON1-P18", /* GPIOX_1 */ + "CON1-P22", /* GPIOX_2 */ + "CON1-P11", /* GPIOX_3 */ + "CON1-P13", /* GPIOX_4 */ + "CON1-P07", /* GPIOX_5 */ + "CON1-P33", /* GPIOX_6 */ + "CON1-P15", /* GPIOX_7 */ + "CON1-P19", /* GPIOX_8 */ + "CON1-P21", /* GPIOX_9 */ + "CON1-P24", /* GPIOX_10 */ + "CON1-P23", /* GPIOX_11 */ + "CON1-P08", /* GPIOX_12 */ + "CON1-P10", /* GPIOX_13 */ + "CON1-P29", /* GPIOX_14 */ + "CON1-P31", /* GPIOX_15 */ + "CON1-P26", /* GPIOX_16 */ + "CON1-P03", /* GPIOX_17 */ + "CON1-P05", /* GPIOX_18 */ + "CON1-P32"; /* GPIOX_19 */ + + /* + * WARNING: The USB Hub needs a reset signal to be turned high in + * order to be detected by the USB Controller. This signal should + * be handled by a USB specific power sequence to reset the Hub + * when the USB bus is powered down. + */ + usb-hub-hog { + gpio-hog; + gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb-hub-reset"; + }; +}; + +&gpio_ao { + gpio-line-names = + /* GPIOAO */ + "DEBUG TX", /* GPIOAO_0 */ + "DEBUG RX", /* GPIOAO_1 */ + "SYS_LED2", /* GPIOAO_2 */ + "UPDATE_KEY", /* GPIOAO_3 */ + "CON1-P40", /* GPIOAO_4 */ + "IR_IN", /* GPIOAO_5 */ + "TF_3V3N_1V8_EN", /* GPIOAO_6 */ + "CON1-P35", /* GPIOAO_7 */ + "CON1-P12", /* GPIOAO_8 */ + "CON1-P37", /* GPIOAO_9 */ + "CON1-P38", /* GPIOAO_10 */ + "SYS_LED", /* GPIOAO_11 */ + /* GPIOE */ + "VDDEE_PWM", /* GPIOE_0 */ + "VDDCPU_PWM", /* GPIOE_1 */ + "TF_PWR_EN"; /* GPIOE_2 */ +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&dc_in>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddao_1v8>; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + /* TOFIX: SD card is barely usable in SDR modes */ + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&tflash_vdd>; + vqmmc-supply = <&vddio_c>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&emmc_1v8>; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; +}; + +&usb2_phy0 { + phy-supply = <&dc_in>; +}; + +&usb2_phy1 { + /* Enable the hub which is connected to this port */ + phy-supply = <&vl_pwr_en>; +}; diff --git a/dts/src/arm64/amlogic/meson-sm1-h96-max.dts b/dts/src/arm64/amlogic/meson-sm1-h96-max.dts index 0f6660e68e..e6e9410d40 100644 --- a/dts/src/arm64/amlogic/meson-sm1-h96-max.dts +++ b/dts/src/arm64/amlogic/meson-sm1-h96-max.dts @@ -29,7 +29,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&frddr_a>; @@ -100,7 +99,7 @@ interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/dts/src/arm64/amlogic/meson-sm1-odroid-c4.dts b/dts/src/arm64/amlogic/meson-sm1-odroid-c4.dts index 8c30ce6368..d04768a66b 100644 --- a/dts/src/arm64/amlogic/meson-sm1-odroid-c4.dts +++ b/dts/src/arm64/amlogic/meson-sm1-odroid-c4.dts @@ -26,20 +26,30 @@ sound { model = "ODROID-C4"; }; -}; -&gpio { - /* - * WARNING: The USB Hub on the Odroid-C4 needs a reset signal - * to be turned high in order to be detected by the USB Controller - * This signal should be handled by a USB specific power sequence - * in order to reset the Hub when USB bus is powered down. - */ - hog-0 { - gpio-hog; - gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "usb-hub-reset"; + /* USB hub supports both USB 2.0 and USB 3.0 root hub */ + usb-hub { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + + /* 2.0 hub on port 1 */ + hub_2_0: hub@1 { + compatible = "usb2109,2817"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; + vdd-supply = <&vcc_5v>; + }; + + /* 3.1 hub on port 4 */ + hub_3_0: hub@2 { + compatible = "usb2109,817"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; + vdd-supply = <&vcc_5v>; + }; }; }; diff --git a/dts/src/arm64/amlogic/meson-sm1-odroid-hc4.dts b/dts/src/arm64/amlogic/meson-sm1-odroid-hc4.dts index e3486f6064..0170139b8d 100644 --- a/dts/src/arm64/amlogic/meson-sm1-odroid-hc4.dts +++ b/dts/src/arm64/amlogic/meson-sm1-odroid-hc4.dts @@ -19,8 +19,6 @@ fan0: pwm-fan { compatible = "pwm-fan"; #cooling-cells = <2>; - cooling-min-state = <0>; - cooling-max-state = <3>; cooling-levels = <0 120 170 220>; pwms = <&pwm_cd 1 40000 0>; }; @@ -45,7 +43,7 @@ }; /* Powers the SATA Disk 0 regulator, which is enabled when a disk load is detected */ - p12v_0: regulator-p12v_0 { + p12v_0: regulator-p12v-0 { compatible = "regulator-fixed"; regulator-name = "P12V_0"; regulator-min-microvolt = <12000000>; @@ -58,7 +56,7 @@ }; /* Powers the SATA Disk 1 regulator, which is enabled when a disk load is detected */ - p12v_1: regulator-p12v_1 { + p12v_1: regulator-p12v-1 { compatible = "regulator-fixed"; regulator-name = "P12V_1"; regulator-min-microvolt = <12000000>; @@ -76,9 +74,17 @@ }; &cpu_thermal { + trips { + cpu_active: cpu-active { + temperature = <60000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; + }; + cooling-maps { map { - trip = <&cpu_passive>; + trip = <&cpu_active>; cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; @@ -131,10 +137,6 @@ }; &usb { - phys = <&usb2_phy1>; - phy-names = "usb2-phy1"; -}; - -&usb2_phy0 { - status = "disabled"; + phys = <&usb2_phy0>, <&usb2_phy1>; + phy-names = "usb2-phy0", "usb2-phy1"; }; diff --git a/dts/src/arm64/amlogic/meson-sm1-odroid.dtsi b/dts/src/arm64/amlogic/meson-sm1-odroid.dtsi index ddb1b34539..951eb8e3f0 100644 --- a/dts/src/arm64/amlogic/meson-sm1-odroid.dtsi +++ b/dts/src/arm64/amlogic/meson-sm1-odroid.dtsi @@ -28,7 +28,7 @@ reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; }; - tflash_vdd: regulator-tflash_vdd { + tflash_vdd: regulator-tflash-vdd { compatible = "regulator-fixed"; regulator-name = "TFLASH_VDD"; @@ -40,7 +40,7 @@ regulator-always-on; }; - tf_io: gpio-regulator-tf_io { + tf_io: gpio-regulator-tf-io { compatible = "regulator-gpio"; regulator-name = "TF_IO"; @@ -48,7 +48,7 @@ regulator-max-microvolt = <3300000>; vin-supply = <&vcc_5v>; - enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>; + enable-gpios = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>; enable-active-high; regulator-always-on; @@ -59,7 +59,7 @@ <1800000 1>; }; - flash_1v8: regulator-flash_1v8 { + flash_1v8: regulator-flash-1v8 { compatible = "regulator-fixed"; regulator-name = "FLASH_1V8"; regulator-min-microvolt = <1800000>; @@ -68,7 +68,7 @@ regulator-always-on; }; - main_12v: regulator-main_12v { + main_12v: regulator-main-12v { compatible = "regulator-fixed"; regulator-name = "12V"; regulator-min-microvolt = <12000000>; @@ -76,7 +76,7 @@ regulator-always-on; }; - vcc_5v: regulator-vcc_5v { + vcc_5v: regulator-vcc-5v { compatible = "regulator-fixed"; regulator-name = "5V"; regulator-min-microvolt = <5000000>; @@ -87,7 +87,7 @@ enable-active-high; }; - vcc_1v8: regulator-vcc_1v8 { + vcc_1v8: regulator-vcc-1v8 { compatible = "regulator-fixed"; regulator-name = "VCC_1V8"; regulator-min-microvolt = <1800000>; @@ -96,7 +96,7 @@ regulator-always-on; }; - vcc_3v3: regulator-vcc_3v3 { + vcc_3v3: regulator-vcc-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; @@ -125,7 +125,7 @@ regulator-always-on; }; - usb_pwr_en: regulator-usb_pwr_en { + usb_pwr_en: regulator-usb-pwr-en { compatible = "regulator-fixed"; regulator-name = "USB_PWR_EN"; regulator-min-microvolt = <5000000>; @@ -137,7 +137,7 @@ enable-active-high; }; - vddao_1v8: regulator-vddao_1v8 { + vddao_1v8: regulator-vddao-1v8 { compatible = "regulator-fixed"; regulator-name = "VDDAO_1V8"; regulator-min-microvolt = <1800000>; @@ -146,7 +146,7 @@ regulator-always-on; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; @@ -181,7 +181,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&frddr_a>; @@ -283,7 +282,7 @@ interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/dts/src/arm64/amlogic/meson-sm1-s905d3-libretech-cc.dts b/dts/src/arm64/amlogic/meson-sm1-s905d3-libretech-cc.dts new file mode 100644 index 0000000000..537370db36 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-sm1-s905d3-libretech-cc.dts @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 BayLibre, SAS. + * Author: Jerome Brunet <jbrunet@baylibre.com> + */ + +/dts-v1/; + +#include <dt-bindings/clock/g12a-clkc.h> +#include "meson-sm1.dtsi" +#include "meson-libretech-cottonwood.dtsi" + +/ { + compatible = "libretech,aml-s905d3-cc", "amlogic,sm1"; + model = "Libre Computer AML-S905D3-CC Solitude"; + + sound { + model = "LC-SOLITUDE"; + audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", + "TDMOUT_A IN 1", "FRDDR_B OUT 0", + "TDMOUT_A IN 2", "FRDDR_C OUT 0", + "TDM_A Playback", "TDMOUT_A OUT", + "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "TDMOUT_C IN 0", "FRDDR_A OUT 2", + "TDMOUT_C IN 1", "FRDDR_B OUT 2", + "TDMOUT_C IN 2", "FRDDR_C OUT 2", + "TDM_C Playback", "TDMOUT_C OUT", + "TDMIN_A IN 0", "TDM_A Capture", + "TDMIN_B IN 0", "TDM_A Capture", + "TDMIN_C IN 0", "TDM_A Capture", + "TDMIN_A IN 13", "TDM_A Loopback", + "TDMIN_B IN 13", "TDM_A Loopback", + "TDMIN_C IN 13", "TDM_A Loopback", + "TDMIN_A IN 1", "TDM_B Capture", + "TDMIN_B IN 1", "TDM_B Capture", + "TDMIN_C IN 1", "TDM_B Capture", + "TDMIN_A IN 14", "TDM_B Loopback", + "TDMIN_B IN 14", "TDM_B Loopback", + "TDMIN_C IN 14", "TDM_B Loopback", + "TDMIN_A IN 2", "TDM_C Capture", + "TDMIN_B IN 2", "TDM_C Capture", + "TDMIN_C IN 2", "TDM_C Capture", + "TDMIN_A IN 15", "TDM_C Loopback", + "TDMIN_B IN 15", "TDM_C Loopback", + "TDMIN_C IN 15", "TDM_C Loopback", + "TODDR_A IN 0", "TDMIN_A OUT", + "TODDR_B IN 0", "TDMIN_A OUT", + "TODDR_C IN 0", "TDMIN_A OUT", + "TODDR_A IN 1", "TDMIN_B OUT", + "TODDR_B IN 1", "TDMIN_B OUT", + "TODDR_C IN 1", "TDMIN_B OUT", + "TODDR_A IN 2", "TDMIN_C OUT", + "TODDR_B IN 2", "TDMIN_C OUT", + "TODDR_C IN 2", "TDMIN_C OUT", + "Lineout", "ACODEC LOLP", + "Lineout", "ACODEC LORP"; + }; +}; + +&cpu0 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU1_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU2_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU3_CLK>; + clock-latency = <50000>; +}; diff --git a/dts/src/arm64/amlogic/meson-sm1-sei610.dts b/dts/src/arm64/amlogic/meson-sm1-sei610.dts index 603337ca56..3581e14cbf 100644 --- a/dts/src/arm64/amlogic/meson-sm1-sei610.dts +++ b/dts/src/arm64/amlogic/meson-sm1-sei610.dts @@ -32,7 +32,6 @@ compatible = "dmic-codec"; num-channels = <2>; wakeup-delay-ms = <50>; - status = "okay"; sound-name-prefix = "MIC"; }; @@ -53,7 +52,7 @@ linux,code = <BTN_0>; gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio_intc>; - interrupts = <34 IRQ_TYPE_EDGE_BOTH>; + interrupts = <IRQID_GPIOH_6 IRQ_TYPE_EDGE_BOTH>; }; key-2 { @@ -61,7 +60,7 @@ linux,code = <BTN_1>; gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio_intc>; - interrupts = <35 IRQ_TYPE_EDGE_BOTH>; + interrupts = <IRQID_GPIOH_7 IRQ_TYPE_EDGE_BOTH>; }; key-3 { @@ -69,7 +68,7 @@ linux,code = <BTN_2>; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio_intc>; - interrupts = <2 IRQ_TYPE_EDGE_BOTH>; + interrupts = <IRQID_GPIOAO_2 IRQ_TYPE_EDGE_BOTH>; }; key-mic-mute { @@ -78,7 +77,7 @@ linux,input-type = <EV_SW>; gpios = <&gpio_ao GPIOE_2 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio_intc>; - interrupts = <99 IRQ_TYPE_EDGE_BOTH>; + interrupts = <IRQID_GPIOE_2 IRQ_TYPE_EDGE_BOTH>; }; key-power { @@ -86,7 +85,7 @@ linux,code = <KEY_POWER>; gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>; interrupt-parent = <&gpio_intc>; - interrupts = <3 IRQ_TYPE_EDGE_BOTH>; + interrupts = <IRQID_GPIOAO_3 IRQ_TYPE_EDGE_BOTH>; }; }; @@ -128,7 +127,7 @@ reg = <0x0 0x0 0x0 0x40000000>; }; - ao_5v: regulator-ao_5v { + ao_5v: regulator-ao-5v { compatible = "regulator-fixed"; regulator-name = "AO_5V"; regulator-min-microvolt = <5000000>; @@ -137,7 +136,7 @@ regulator-always-on; }; - dc_in: regulator-dc_in { + dc_in: regulator-dc-in { compatible = "regulator-fixed"; regulator-name = "DC_IN"; regulator-min-microvolt = <5000000>; @@ -145,7 +144,7 @@ regulator-always-on; }; - emmc_1v8: regulator-emmc_1v8 { + emmc_1v8: regulator-emmc-1v8 { compatible = "regulator-fixed"; regulator-name = "EMMC_1V8"; regulator-min-microvolt = <1800000>; @@ -154,7 +153,7 @@ regulator-always-on; }; - vddao_3v3: regulator-vddao_3v3 { + vddao_3v3: regulator-vddao-3v3 { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; @@ -164,14 +163,13 @@ }; /* Used by Tuner, RGB Led & IR Emitter LED array */ - vddao_3v3_t: regulator-vddao_3v3_t { + vddao_3v3_t: regulator-vddao-3v3-t { compatible = "regulator-fixed"; regulator-name = "VDDAO_3V3_T"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&vddao_3v3>; gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; - enable-active-low; regulator-always-on; }; @@ -194,7 +192,7 @@ regulator-always-on; }; - vddio_ao1v8: regulator-vddio_ao1v8 { + vddio_ao1v8: regulator-vddio-ao1v8 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO1V8"; regulator-min-microvolt = <1800000>; @@ -248,7 +246,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&frddr_a>; @@ -584,7 +581,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; interrupt-parent = <&gpio_intc>; - interrupts = <95 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <IRQID_GPIOX_18 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "host-wakeup"; shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; max-speed = <2000000>; diff --git a/dts/src/arm64/amlogic/meson-sm1-x96-air-gbit.dts b/dts/src/arm64/amlogic/meson-sm1-x96-air-gbit.dts index 7e1a74046b..fc9b961133 100644 --- a/dts/src/arm64/amlogic/meson-sm1-x96-air-gbit.dts +++ b/dts/src/arm64/amlogic/meson-sm1-x96-air-gbit.dts @@ -29,7 +29,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&frddr_a>; @@ -100,7 +99,7 @@ interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_14 */ - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/dts/src/arm64/amlogic/meson-sm1-x96-air.dts b/dts/src/arm64/amlogic/meson-sm1-x96-air.dts index cd93d798f2..9ea969255b 100644 --- a/dts/src/arm64/amlogic/meson-sm1-x96-air.dts +++ b/dts/src/arm64/amlogic/meson-sm1-x96-air.dts @@ -29,7 +29,6 @@ assigned-clock-rates = <294912000>, <270950400>, <393216000>; - status = "okay"; dai-link-0 { sound-dai = <&frddr_a>; diff --git a/dts/src/arm64/amlogic/meson-sm1.dtsi b/dts/src/arm64/amlogic/meson-sm1.dtsi index 80737731af..643f94d9d0 100644 --- a/dts/src/arm64/amlogic/meson-sm1.dtsi +++ b/dts/src/arm64/amlogic/meson-sm1.dtsi @@ -88,6 +88,8 @@ l2: l2-cache0 { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; @@ -520,6 +522,10 @@ power-domains = <&pwrc PWRC_SM1_PCIE_ID>; }; +&pmu { + compatible = "amlogic,sm1-ddr-pmu"; +}; + &pwrc { compatible = "amlogic,meson-sm1-pwrc"; }; @@ -543,3 +549,7 @@ &usb { power-domains = <&pwrc PWRC_SM1_USB_ID>; }; + +&npu { + power-domains = <&pwrc PWRC_SM1_NNA_ID>; +}; |