summaryrefslogtreecommitdiffstats
path: root/dts/src/arm64/amlogic
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm64/amlogic')
-rw-r--r--dts/src/arm64/amlogic/meson-axg-s400.dts30
-rw-r--r--dts/src/arm64/amlogic/meson-axg.dtsi33
-rw-r--r--dts/src/arm64/amlogic/meson-g12a-x96-max.dts28
-rw-r--r--dts/src/arm64/amlogic/meson-g12a.dtsi70
-rw-r--r--dts/src/arm64/amlogic/meson-gx.dtsi31
-rw-r--r--dts/src/arm64/amlogic/meson-gxbb.dtsi6
-rw-r--r--dts/src/arm64/amlogic/meson-gxl.dtsi6
-rw-r--r--dts/src/arm64/amlogic/meson-gxm.dtsi8
8 files changed, 172 insertions, 40 deletions
diff --git a/dts/src/arm64/amlogic/meson-axg-s400.dts b/dts/src/arm64/amlogic/meson-axg-s400.dts
index 824eba9..75fe1a2 100644
--- a/dts/src/arm64/amlogic/meson-axg-s400.dts
+++ b/dts/src/arm64/amlogic/meson-axg-s400.dts
@@ -95,6 +95,13 @@
sound-name-prefix = "MIC";
};
+ spdif_dir: audio-codec-4 {
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dir";
+ status = "okay";
+ sound-name-prefix = "DIR";
+ };
+
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
@@ -249,6 +256,9 @@
"TODDR_A IN 2", "TDMIN_C OUT",
"TODDR_B IN 2", "TDMIN_C OUT",
"TODDR_C IN 2", "TDMIN_C OUT",
+ "TODDR_A IN 3", "SPDIFIN Capture",
+ "TODDR_B IN 3", "SPDIFIN Capture",
+ "TODDR_C IN 3", "SPDIFIN Capture",
"TODDR_A IN 4", "PDM Capture",
"TODDR_B IN 4", "PDM Capture",
"TODDR_C IN 4", "PDM Capture",
@@ -326,6 +336,14 @@
};
dai-link-8 {
+ sound-dai = <&spdifin>;
+
+ codec {
+ sound-dai = <&spdif_dir>;
+ };
+ };
+
+ dai-link-9 {
sound-dai = <&pdm>;
codec {
@@ -446,7 +464,8 @@
bus-width = <4>;
cap-sd-highspeed;
- max-frequency = <100000000>;
+ sd-uhs-sdr104;
+ max-frequency = <200000000>;
non-removable;
disable-wp;
@@ -469,9 +488,8 @@
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
- cap-sd-highspeed;
cap-mmc-highspeed;
- max-frequency = <180000000>;
+ max-frequency = <200000000>;
non-removable;
disable-wp;
mmc-ddr-1_8v;
@@ -483,6 +501,12 @@
vqmmc-supply = <&vddio_boot>;
};
+&spdifin {
+ pinctrl-0 = <&spdif_in_a19_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
&spdifout {
pinctrl-0 = <&spdif_out_a20_pins>;
pinctrl-names = "default";
diff --git a/dts/src/arm64/amlogic/meson-axg.dtsi b/dts/src/arm64/amlogic/meson-axg.dtsi
index fffd557..34704fe 100644
--- a/dts/src/arm64/amlogic/meson-axg.dtsi
+++ b/dts/src/arm64/amlogic/meson-axg.dtsi
@@ -68,7 +68,7 @@
cpu0: cpu@0 {
device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&l2>;
@@ -77,7 +77,7 @@
cpu1: cpu@1 {
device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&l2>;
@@ -86,7 +86,7 @@
cpu2: cpu@2 {
device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x0 0x2>;
enable-method = "psci";
next-level-cache = <&l2>;
@@ -95,7 +95,7 @@
cpu3: cpu@3 {
device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x0 0x3>;
enable-method = "psci";
next-level-cache = <&l2>;
@@ -111,6 +111,14 @@
compatible = "amlogic,meson-gxbb-sm";
};
+ efuse: efuse {
+ compatible = "amlogic,meson-gxbb-efuse";
+ clocks = <&clkc CLKID_EFUSE>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ read-only;
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
@@ -1260,6 +1268,18 @@
status = "disabled";
};
+ spdifin: audio-controller@400 {
+ compatible = "amlogic,axg-spdifin";
+ reg = <0x0 0x400 0x0 0x30>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SPDIFIN";
+ interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
+ <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
+ clock-names = "pclk", "refclk";
+ status = "disabled";
+ };
+
spdifout: audio-controller@480 {
compatible = "amlogic,axg-spdifout";
reg = <0x0 0x480 0x0 0x50>;
@@ -1590,6 +1610,11 @@
status = "disabled";
};
+ clk_msr: clock-measure@18000 {
+ compatible = "amlogic,meson-axg-clk-measure";
+ reg = <0x0 0x18000 0x0 0x10>;
+ };
+
i2c3: i2c@1c000 {
compatible = "amlogic,meson-axg-i2c";
reg = <0x0 0x1c000 0x0 0x20>;
diff --git a/dts/src/arm64/amlogic/meson-g12a-x96-max.dts b/dts/src/arm64/amlogic/meson-g12a-x96-max.dts
new file mode 100644
index 0000000..c62d3d5
--- /dev/null
+++ b/dts/src/arm64/amlogic/meson-g12a-x96-max.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 BayLibre SAS. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-g12a.dtsi"
+
+/ {
+ compatible = "amediatech,x96-max", "amlogic,u200", "amlogic,g12a";
+ model = "Shenzhen Amediatech Technology Co., Ltd X96 Max";
+
+ aliases {
+ serial0 = &uart_AO;
+ };
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+};
+
+&uart_AO {
+ status = "okay";
+};
diff --git a/dts/src/arm64/amlogic/meson-g12a.dtsi b/dts/src/arm64/amlogic/meson-g12a.dtsi
index 3b82a97..17c6217 100644
--- a/dts/src/arm64/amlogic/meson-g12a.dtsi
+++ b/dts/src/arm64/amlogic/meson-g12a.dtsi
@@ -20,7 +20,7 @@
cpu0: cpu@0 {
device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&l2>;
@@ -28,7 +28,7 @@
cpu1: cpu@1 {
device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&l2>;
@@ -36,7 +36,7 @@
cpu2: cpu@2 {
device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x0 0x2>;
enable-method = "psci";
next-level-cache = <&l2>;
@@ -44,7 +44,7 @@
cpu3: cpu@3 {
device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x0 0x3>;
enable-method = "psci";
next-level-cache = <&l2>;
@@ -78,20 +78,41 @@
#size-cells = <2>;
ranges;
- periphs: periphs@ff634000 {
+ apb: bus@ff600000 {
compatible = "simple-bus";
- reg = <0x0 0xff634000 0x0 0x2000>;
+ reg = <0x0 0xff600000 0x0 0x200000>;
#address-cells = <2>;
#size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>;
- };
+ ranges = <0x0 0x0 0x0 0xff600000 0x0 0x200000>;
+
+ periphs: bus@34400 {
+ compatible = "simple-bus";
+ reg = <0x0 0x34400 0x0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x34400 0x0 0x400>;
+ };
- hiubus: bus@ff63c000 {
- compatible = "simple-bus";
- reg = <0x0 0xff63c000 0x0 0x1c00>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
+ hiu: bus@3c000 {
+ compatible = "simple-bus";
+ reg = <0x0 0x3c000 0x0 0x1400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x3c000 0x0 0x1400>;
+
+ hhi: system-controller@0 {
+ compatible = "amlogic,meson-gx-hhi-sysctrl",
+ "simple-mfd", "syscon";
+ reg = <0 0 0 0x400>;
+
+ clkc: clock-controller {
+ compatible = "amlogic,g12a-clkc";
+ #clock-cells = <1>;
+ clocks = <&xtal>;
+ clock-names = "xtal";
+ };
+ };
+ };
};
aobus: bus@ff800000 {
@@ -102,7 +123,8 @@
ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
uart_AO: serial@3000 {
- compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
+ compatible = "amlogic,meson-gx-uart",
+ "amlogic,meson-ao-uart";
reg = <0x0 0x3000 0x0 0x18>;
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>, <&xtal>, <&xtal>;
@@ -111,7 +133,8 @@
};
uart_AO_B: serial@4000 {
- compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
+ compatible = "amlogic,meson-gx-uart",
+ "amlogic,meson-ao-uart";
reg = <0x0 0x4000 0x0 0x18>;
interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>, <&xtal>, <&xtal>;
@@ -135,18 +158,15 @@
cbus: bus@ffd00000 {
compatible = "simple-bus";
- reg = <0x0 0xffd00000 0x0 0x25000>;
+ reg = <0x0 0xffd00000 0x0 0x100000>;
#address-cells = <2>;
#size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>;
- };
+ ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>;
- apb: apb@ffe00000 {
- compatible = "simple-bus";
- reg = <0x0 0xffe00000 0x0 0x200000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
+ clk_msr: clock-measure@18000 {
+ compatible = "amlogic,meson-g12a-clk-measure";
+ reg = <0x0 0x18000 0x0 0x10>;
+ };
};
};
diff --git a/dts/src/arm64/amlogic/meson-gx.dtsi b/dts/src/arm64/amlogic/meson-gx.dtsi
index 44c5c51..6772709 100644
--- a/dts/src/arm64/amlogic/meson-gx.dtsi
+++ b/dts/src/arm64/amlogic/meson-gx.dtsi
@@ -50,13 +50,35 @@
};
};
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ simplefb_cvbs: framebuffer-cvbs {
+ compatible = "amlogic,simple-framebuffer",
+ "simple-framebuffer";
+ amlogic,pipeline = "vpu-cvbs";
+ power-domains = <&pwrc_vpu>;
+ status = "disabled";
+ };
+
+ simplefb_hdmi: framebuffer-hdmi {
+ compatible = "amlogic,simple-framebuffer",
+ "simple-framebuffer";
+ amlogic,pipeline = "vpu-hdmi";
+ power-domains = <&pwrc_vpu>;
+ status = "disabled";
+ };
+ };
+
cpus {
#address-cells = <0x2>;
#size-cells = <0x0>;
cpu0: cpu@0 {
device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&l2>;
@@ -65,7 +87,7 @@
cpu1: cpu@1 {
device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&l2>;
@@ -74,7 +96,7 @@
cpu2: cpu@2 {
device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x0 0x2>;
enable-method = "psci";
next-level-cache = <&l2>;
@@ -83,7 +105,7 @@
cpu3: cpu@3 {
device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x0 0x3>;
enable-method = "psci";
next-level-cache = <&l2>;
@@ -510,6 +532,7 @@
interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
+ amlogic,canvas = <&canvas>;
/* CVBS VDAC output port */
cvbs_vdac_port: port@0 {
diff --git a/dts/src/arm64/amlogic/meson-gxbb.dtsi b/dts/src/arm64/amlogic/meson-gxbb.dtsi
index a7b883c..a60d365 100644
--- a/dts/src/arm64/amlogic/meson-gxbb.dtsi
+++ b/dts/src/arm64/amlogic/meson-gxbb.dtsi
@@ -784,6 +784,12 @@
resets = <&reset RESET_SD_EMMC_C>;
};
+&simplefb_hdmi {
+ clocks = <&clkc CLKID_HDMI_PCLK>,
+ <&clkc CLKID_CLK81>,
+ <&clkc CLKID_GCLK_VENCI_INT0>;
+};
+
&spicc {
clocks = <&clkc CLKID_SPICC>;
clock-names = "core";
diff --git a/dts/src/arm64/amlogic/meson-gxl.dtsi b/dts/src/arm64/amlogic/meson-gxl.dtsi
index d5c3d78..3093ae4 100644
--- a/dts/src/arm64/amlogic/meson-gxl.dtsi
+++ b/dts/src/arm64/amlogic/meson-gxl.dtsi
@@ -787,6 +787,12 @@
resets = <&reset RESET_SD_EMMC_C>;
};
+&simplefb_hdmi {
+ clocks = <&clkc CLKID_HDMI_PCLK>,
+ <&clkc CLKID_CLK81>,
+ <&clkc CLKID_GCLK_VENCI_INT0>;
+};
+
&spicc {
clocks = <&clkc CLKID_SPICC>;
clock-names = "core";
diff --git a/dts/src/arm64/amlogic/meson-gxm.dtsi b/dts/src/arm64/amlogic/meson-gxm.dtsi
index 247888d..ed3a3d5 100644
--- a/dts/src/arm64/amlogic/meson-gxm.dtsi
+++ b/dts/src/arm64/amlogic/meson-gxm.dtsi
@@ -44,7 +44,7 @@
cpu4: cpu@100 {
device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x0 0x100>;
enable-method = "psci";
next-level-cache = <&l2>;
@@ -53,7 +53,7 @@
cpu5: cpu@101 {
device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x0 0x101>;
enable-method = "psci";
next-level-cache = <&l2>;
@@ -62,7 +62,7 @@
cpu6: cpu@102 {
device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x0 0x102>;
enable-method = "psci";
next-level-cache = <&l2>;
@@ -71,7 +71,7 @@
cpu7: cpu@103 {
device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x0 0x103>;
enable-method = "psci";
next-level-cache = <&l2>;