diff options
Diffstat (limited to 'dts/src/arm64/broadcom/bcm283x.dtsi')
-rw-r--r-- | dts/src/arm64/broadcom/bcm283x.dtsi | 638 |
1 files changed, 0 insertions, 638 deletions
diff --git a/dts/src/arm64/broadcom/bcm283x.dtsi b/dts/src/arm64/broadcom/bcm283x.dtsi deleted file mode 100644 index 431dcfc900..0000000000 --- a/dts/src/arm64/broadcom/bcm283x.dtsi +++ /dev/null @@ -1,638 +0,0 @@ -#include <dt-bindings/pinctrl/bcm2835.h> -#include <dt-bindings/clock/bcm2835.h> -#include <dt-bindings/clock/bcm2835-aux.h> -#include <dt-bindings/gpio/gpio.h> - -/* firmware-provided startup stubs live here, where the secondary CPUs are - * spinning. - */ -/memreserve/ 0x00000000 0x00001000; - -/* This include file covers the common peripherals and configuration between - * bcm2835 and bcm2836 implementations, leaving the CPU configuration to - * bcm2835.dtsi and bcm2836.dtsi. - */ - -/ { - compatible = "brcm,bcm2835"; - model = "BCM2835"; - interrupt-parent = <&intc>; - #address-cells = <1>; - #size-cells = <1>; - - chosen { - bootargs = "earlyprintk console=ttyAMA0"; - }; - - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <0>; - polling-delay = <1000>; - - thermal-sensors = <&thermal>; - - trips { - cpu-crit { - temperature = <80000>; - hysteresis = <0>; - type = "critical"; - }; - }; - - cooling-maps { - }; - }; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - - timer@7e003000 { - compatible = "brcm,bcm2835-system-timer"; - reg = <0x7e003000 0x1000>; - interrupts = <1 0>, <1 1>, <1 2>, <1 3>; - /* This could be a reference to BCM2835_CLOCK_TIMER, - * but we don't have the driver using the common clock - * support yet. - */ - clock-frequency = <1000000>; - }; - - dma: dma@7e007000 { - compatible = "brcm,bcm2835-dma"; - reg = <0x7e007000 0xf00>; - interrupts = <1 16>, - <1 17>, - <1 18>, - <1 19>, - <1 20>, - <1 21>, - <1 22>, - <1 23>, - <1 24>, - <1 25>, - <1 26>, - /* dma channel 11-14 share one irq */ - <1 27>, - <1 27>, - <1 27>, - <1 27>, - /* unused shared irq for all channels */ - <1 28>; - interrupt-names = "dma0", - "dma1", - "dma2", - "dma3", - "dma4", - "dma5", - "dma6", - "dma7", - "dma8", - "dma9", - "dma10", - "dma11", - "dma12", - "dma13", - "dma14", - "dma-shared-all"; - #dma-cells = <1>; - brcm,dma-channel-mask = <0x7f35>; - }; - - intc: interrupt-controller@7e00b200 { - compatible = "brcm,bcm2835-armctrl-ic"; - reg = <0x7e00b200 0x200>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - watchdog@7e100000 { - compatible = "brcm,bcm2835-pm-wdt"; - reg = <0x7e100000 0x28>; - }; - - clocks: cprman@7e101000 { - compatible = "brcm,bcm2835-cprman"; - #clock-cells = <1>; - reg = <0x7e101000 0x2000>; - - /* CPRMAN derives almost everything from the - * platform's oscillator. However, the DSI - * pixel clocks come from the DSI analog PHY. - */ - clocks = <&clk_osc>, - <&dsi0 0>, <&dsi0 1>, <&dsi0 2>, - <&dsi1 0>, <&dsi1 1>, <&dsi1 2>; - }; - - rng@7e104000 { - compatible = "brcm,bcm2835-rng"; - reg = <0x7e104000 0x10>; - }; - - mailbox: mailbox@7e00b880 { - compatible = "brcm,bcm2835-mbox"; - reg = <0x7e00b880 0x40>; - interrupts = <0 1>; - #mbox-cells = <0>; - }; - - gpio: gpio@7e200000 { - compatible = "brcm,bcm2835-gpio"; - reg = <0x7e200000 0xb4>; - /* - * The GPIO IP block is designed for 3 banks of GPIOs. - * Each bank has a GPIO interrupt for itself. - * There is an overall "any bank" interrupt. - * In order, these are GIC interrupts 17, 18, 19, 20. - * Since the BCM2835 only has 2 banks, the 2nd bank - * interrupt output appears to be mirrored onto the - * 3rd bank's interrupt signal. - * So, a bank0 interrupt shows up on 17, 20, and - * a bank1 interrupt shows up on 18, 19, 20! - */ - interrupts = <2 17>, <2 18>, <2 19>, <2 20>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - - /* Defines pin muxing groups according to - * BCM2835-ARM-Peripherals.pdf page 102. - * - * While each pin can have its mux selected - * for various functions individually, some - * groups only make sense to switch to a - * particular function together. - */ - dpi_gpio0: dpi_gpio0 { - brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 - 12 13 14 15 16 17 18 19 - 20 21 22 23 24 25 26 27>; - brcm,function = <BCM2835_FSEL_ALT2>; - }; - emmc_gpio22: emmc_gpio22 { - brcm,pins = <22 23 24 25 26 27>; - brcm,function = <BCM2835_FSEL_ALT3>; - }; - emmc_gpio34: emmc_gpio34 { - brcm,pins = <34 35 36 37 38 39>; - brcm,function = <BCM2835_FSEL_ALT3>; - brcm,pull = <BCM2835_PUD_OFF - BCM2835_PUD_UP - BCM2835_PUD_UP - BCM2835_PUD_UP - BCM2835_PUD_UP - BCM2835_PUD_UP>; - }; - emmc_gpio48: emmc_gpio48 { - brcm,pins = <48 49 50 51 52 53>; - brcm,function = <BCM2835_FSEL_ALT3>; - }; - - gpclk0_gpio4: gpclk0_gpio4 { - brcm,pins = <4>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - gpclk1_gpio5: gpclk1_gpio5 { - brcm,pins = <5>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - gpclk1_gpio42: gpclk1_gpio42 { - brcm,pins = <42>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - gpclk1_gpio44: gpclk1_gpio44 { - brcm,pins = <44>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - gpclk2_gpio6: gpclk2_gpio6 { - brcm,pins = <6>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - gpclk2_gpio43: gpclk2_gpio43 { - brcm,pins = <43>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - - i2c0_gpio0: i2c0_gpio0 { - brcm,pins = <0 1>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - i2c0_gpio28: i2c0_gpio28 { - brcm,pins = <28 29>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - i2c0_gpio44: i2c0_gpio44 { - brcm,pins = <44 45>; - brcm,function = <BCM2835_FSEL_ALT1>; - }; - i2c1_gpio2: i2c1_gpio2 { - brcm,pins = <2 3>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - i2c1_gpio44: i2c1_gpio44 { - brcm,pins = <44 45>; - brcm,function = <BCM2835_FSEL_ALT2>; - }; - i2c_slave_gpio18: i2c_slave_gpio18 { - brcm,pins = <18 19 20 21>; - brcm,function = <BCM2835_FSEL_ALT3>; - }; - - jtag_gpio4: jtag_gpio4 { - brcm,pins = <4 5 6 12 13>; - brcm,function = <BCM2835_FSEL_ALT4>; - }; - jtag_gpio22: jtag_gpio22 { - brcm,pins = <22 23 24 25 26 27>; - brcm,function = <BCM2835_FSEL_ALT4>; - }; - - pcm_gpio18: pcm_gpio18 { - brcm,pins = <18 19 20 21>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - pcm_gpio28: pcm_gpio28 { - brcm,pins = <28 29 30 31>; - brcm,function = <BCM2835_FSEL_ALT2>; - }; - - pwm0_gpio12: pwm0_gpio12 { - brcm,pins = <12>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - pwm0_gpio18: pwm0_gpio18 { - brcm,pins = <18>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; - pwm0_gpio40: pwm0_gpio40 { - brcm,pins = <40>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - pwm1_gpio13: pwm1_gpio13 { - brcm,pins = <13>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - pwm1_gpio19: pwm1_gpio19 { - brcm,pins = <19>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; - pwm1_gpio41: pwm1_gpio41 { - brcm,pins = <41>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - pwm1_gpio45: pwm1_gpio45 { - brcm,pins = <45>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - - sdhost_gpio48: sdhost_gpio48 { - brcm,pins = <48 49 50 51 52 53>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - - spi0_gpio7: spi0_gpio7 { - brcm,pins = <7 8 9 10 11>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - spi0_gpio35: spi0_gpio35 { - brcm,pins = <35 36 37 38 39>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - spi1_gpio16: spi1_gpio16 { - brcm,pins = <16 17 18 19 20 21>; - brcm,function = <BCM2835_FSEL_ALT4>; - }; - spi2_gpio40: spi2_gpio40 { - brcm,pins = <40 41 42 43 44 45>; - brcm,function = <BCM2835_FSEL_ALT4>; - }; - - uart0_gpio14: uart0_gpio14 { - brcm,pins = <14 15>; - brcm,function = <BCM2835_FSEL_ALT0>; - }; - /* Separate from the uart0_gpio14 group - * because it conflicts with spi1_gpio16, and - * people often run uart0 on the two pins - * without flow control. - */ - uart0_ctsrts_gpio16: uart0_ctsrts_gpio16 { - brcm,pins = <16 17>; - brcm,function = <BCM2835_FSEL_ALT3>; - }; - uart0_ctsrts_gpio30: uart0_ctsrts_gpio30 { - brcm,pins = <30 31>; - brcm,function = <BCM2835_FSEL_ALT3>; - }; - uart0_gpio32: uart0_gpio32 { - brcm,pins = <32 33>; - brcm,function = <BCM2835_FSEL_ALT3>; - }; - uart0_gpio36: uart0_gpio36 { - brcm,pins = <36 37>; - brcm,function = <BCM2835_FSEL_ALT2>; - }; - uart0_ctsrts_gpio38: uart0_ctsrts_gpio38 { - brcm,pins = <38 39>; - brcm,function = <BCM2835_FSEL_ALT2>; - }; - - uart1_gpio14: uart1_gpio14 { - brcm,pins = <14 15>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; - uart1_ctsrts_gpio16: uart1_ctsrts_gpio16 { - brcm,pins = <16 17>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; - uart1_gpio32: uart1_gpio32 { - brcm,pins = <32 33>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; - uart1_ctsrts_gpio30: uart1_ctsrts_gpio30 { - brcm,pins = <30 31>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; - uart1_gpio40: uart1_gpio40 { - brcm,pins = <40 41>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; - uart1_ctsrts_gpio42: uart1_ctsrts_gpio42 { - brcm,pins = <42 43>; - brcm,function = <BCM2835_FSEL_ALT5>; - }; - }; - - uart0: serial@7e201000 { - compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; - reg = <0x7e201000 0x1000>; - interrupts = <2 25>; - clocks = <&clocks BCM2835_CLOCK_UART>, - <&clocks BCM2835_CLOCK_VPU>; - clock-names = "uartclk", "apb_pclk"; - arm,primecell-periphid = <0x00241011>; - }; - - sdhost: mmc@7e202000 { - compatible = "brcm,bcm2835-sdhost"; - reg = <0x7e202000 0x100>; - interrupts = <2 24>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - dmas = <&dma 13>; - dma-names = "rx-tx"; - status = "disabled"; - }; - - i2s: i2s@7e203000 { - compatible = "brcm,bcm2835-i2s"; - reg = <0x7e203000 0x20>, - <0x7e101098 0x02>; - - dmas = <&dma 2>, - <&dma 3>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi: spi@7e204000 { - compatible = "brcm,bcm2835-spi"; - reg = <0x7e204000 0x1000>; - interrupts = <2 22>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c0: i2c@7e205000 { - compatible = "brcm,bcm2835-i2c"; - reg = <0x7e205000 0x1000>; - interrupts = <2 21>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - pixelvalve@7e206000 { - compatible = "brcm,bcm2835-pixelvalve0"; - reg = <0x7e206000 0x100>; - interrupts = <2 13>; /* pwa0 */ - }; - - pixelvalve@7e207000 { - compatible = "brcm,bcm2835-pixelvalve1"; - reg = <0x7e207000 0x100>; - interrupts = <2 14>; /* pwa1 */ - }; - - dsi0: dsi@7e209000 { - compatible = "brcm,bcm2835-dsi0"; - reg = <0x7e209000 0x78>; - interrupts = <2 4>; - #address-cells = <1>; - #size-cells = <0>; - #clock-cells = <1>; - - clocks = <&clocks BCM2835_PLLA_DSI0>, - <&clocks BCM2835_CLOCK_DSI0E>, - <&clocks BCM2835_CLOCK_DSI0P>; - clock-names = "phy", "escape", "pixel"; - - clock-output-names = "dsi0_byte", - "dsi0_ddr2", - "dsi0_ddr"; - - }; - - thermal: thermal@7e212000 { - compatible = "brcm,bcm2835-thermal"; - reg = <0x7e212000 0x8>; - clocks = <&clocks BCM2835_CLOCK_TSENS>; - #thermal-sensor-cells = <0>; - status = "disabled"; - }; - - aux: aux@0x7e215000 { - compatible = "brcm,bcm2835-aux"; - #clock-cells = <1>; - reg = <0x7e215000 0x8>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - }; - - uart1: serial@7e215040 { - compatible = "brcm,bcm2835-aux-uart"; - reg = <0x7e215040 0x40>; - interrupts = <1 29>; - clocks = <&aux BCM2835_AUX_CLOCK_UART>; - status = "disabled"; - }; - - spi1: spi@7e215080 { - compatible = "brcm,bcm2835-aux-spi"; - reg = <0x7e215080 0x40>; - interrupts = <1 29>; - clocks = <&aux BCM2835_AUX_CLOCK_SPI1>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi2: spi@7e2150c0 { - compatible = "brcm,bcm2835-aux-spi"; - reg = <0x7e2150c0 0x40>; - interrupts = <1 29>; - clocks = <&aux BCM2835_AUX_CLOCK_SPI2>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - pwm: pwm@7e20c000 { - compatible = "brcm,bcm2835-pwm"; - reg = <0x7e20c000 0x28>; - clocks = <&clocks BCM2835_CLOCK_PWM>; - assigned-clocks = <&clocks BCM2835_CLOCK_PWM>; - assigned-clock-rates = <10000000>; - #pwm-cells = <2>; - status = "disabled"; - }; - - sdhci: sdhci@7e300000 { - compatible = "brcm,bcm2835-sdhci"; - reg = <0x7e300000 0x100>; - interrupts = <2 30>; - clocks = <&clocks BCM2835_CLOCK_EMMC>; - status = "disabled"; - }; - - hvs@7e400000 { - compatible = "brcm,bcm2835-hvs"; - reg = <0x7e400000 0x6000>; - interrupts = <2 1>; - }; - - dsi1: dsi@7e700000 { - compatible = "brcm,bcm2835-dsi1"; - reg = <0x7e700000 0x8c>; - interrupts = <2 12>; - #address-cells = <1>; - #size-cells = <0>; - #clock-cells = <1>; - - clocks = <&clocks BCM2835_PLLD_DSI1>, - <&clocks BCM2835_CLOCK_DSI1E>, - <&clocks BCM2835_CLOCK_DSI1P>; - clock-names = "phy", "escape", "pixel"; - - clock-output-names = "dsi1_byte", - "dsi1_ddr2", - "dsi1_ddr"; - - status = "disabled"; - }; - - i2c1: i2c@7e804000 { - compatible = "brcm,bcm2835-i2c"; - reg = <0x7e804000 0x1000>; - interrupts = <2 21>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c2: i2c@7e805000 { - compatible = "brcm,bcm2835-i2c"; - reg = <0x7e805000 0x1000>; - interrupts = <2 21>; - clocks = <&clocks BCM2835_CLOCK_VPU>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - vec: vec@7e806000 { - compatible = "brcm,bcm2835-vec"; - reg = <0x7e806000 0x1000>; - clocks = <&clocks BCM2835_CLOCK_VEC>; - interrupts = <2 27>; - status = "disabled"; - }; - - pixelvalve@7e807000 { - compatible = "brcm,bcm2835-pixelvalve2"; - reg = <0x7e807000 0x100>; - interrupts = <2 10>; /* pixelvalve */ - }; - - hdmi: hdmi@7e902000 { - compatible = "brcm,bcm2835-hdmi"; - reg = <0x7e902000 0x600>, - <0x7e808000 0x100>; - interrupts = <2 8>, <2 9>; - ddc = <&i2c2>; - clocks = <&clocks BCM2835_PLLH_PIX>, - <&clocks BCM2835_CLOCK_HSM>; - clock-names = "pixel", "hdmi"; - dmas = <&dma 17>; - dma-names = "audio-rx"; - status = "disabled"; - }; - - usb: usb@7e980000 { - compatible = "brcm,bcm2835-usb"; - reg = <0x7e980000 0x10000>; - interrupts = <1 9>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clk_usb>; - clock-names = "otg"; - phys = <&usbphy>; - phy-names = "usb2-phy"; - }; - - v3d: v3d@7ec00000 { - compatible = "brcm,bcm2835-v3d"; - reg = <0x7ec00000 0x1000>; - interrupts = <1 10>; - }; - - vc4: gpu { - compatible = "brcm,bcm2835-vc4"; - }; - }; - - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - /* The oscillator is the root of the clock tree. */ - clk_osc: clock@3 { - compatible = "fixed-clock"; - reg = <3>; - #clock-cells = <0>; - clock-output-names = "osc"; - clock-frequency = <19200000>; - }; - - clk_usb: clock@4 { - compatible = "fixed-clock"; - reg = <4>; - #clock-cells = <0>; - clock-output-names = "otg"; - clock-frequency = <480000000>; - }; - }; - - usbphy: phy { - compatible = "usb-nop-xceiv"; - }; -}; |