diff options
Diffstat (limited to 'dts/src/arm64/freescale/fsl-ls1012a-rdb.dts')
| -rw-r--r-- | dts/src/arm64/freescale/fsl-ls1012a-rdb.dts | 66 |
1 files changed, 66 insertions, 0 deletions
diff --git a/dts/src/arm64/freescale/fsl-ls1012a-rdb.dts b/dts/src/arm64/freescale/fsl-ls1012a-rdb.dts index 5edb1e137a..e662677a6e 100644 --- a/dts/src/arm64/freescale/fsl-ls1012a-rdb.dts +++ b/dts/src/arm64/freescale/fsl-ls1012a-rdb.dts @@ -7,11 +7,18 @@ */ /dts-v1/; +#include <dt-bindings/interrupt-controller/irq.h> #include "fsl-ls1012a.dtsi" / { model = "LS1012A RDB Board"; compatible = "fsl,ls1012a-rdb", "fsl,ls1012a"; + + aliases { + serial0 = &duart0; + mmc0 = &esdhc0; + mmc1 = &esdhc1; + }; }; &duart0 { @@ -33,6 +40,65 @@ &i2c0 { status = "okay"; + + accelerometer@1e { + compatible = "nxp,fxos8700"; + reg = <0x1e>; + interrupt-parent = <&gpio26>; + interrupts = <13 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT1"; + }; + + gyroscope@20 { + compatible = "nxp,fxas21002c"; + reg = <0x20>; + }; + + gpio@24 { + compatible = "nxp,pcal9555a"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@25 { + compatible = "nxp,pcal9555a"; + reg = <0x25>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio26: gpio@26 { + compatible = "nxp,pcal9555a"; + reg = <0x26>; + interrupt-parent = <&gpio0>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + + current-sensor@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <2000>; + }; +}; + +&qspi { + status = "okay"; + + s25fs512s0: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + m25p,fast-read; + reg = <0>; + spi-rx-bus-width = <2>; + spi-tx-bus-width = <2>; + }; }; &sata { |