diff options
Diffstat (limited to 'dts/src/arm64/freescale/fsl-ls1028a-qds.dts')
| -rw-r--r-- | dts/src/arm64/freescale/fsl-ls1028a-qds.dts | 174 |
1 files changed, 165 insertions, 9 deletions
diff --git a/dts/src/arm64/freescale/fsl-ls1028a-qds.dts b/dts/src/arm64/freescale/fsl-ls1028a-qds.dts index ca409d907b..0bb2f28a04 100644 --- a/dts/src/arm64/freescale/fsl-ls1028a-qds.dts +++ b/dts/src/arm64/freescale/fsl-ls1028a-qds.dts @@ -23,6 +23,9 @@ gpio2 = &gpio3; serial0 = &duart0; serial1 = &duart1; + mmc0 = &esdhc; + mmc1 = &esdhc1; + rtc1 = &ftm_alarm1; }; chosen { @@ -90,7 +93,7 @@ compatible = "mdio-mux-multiplexer"; mux-controls = <&mux 0>; mdio-parent-bus = <&enetc_mdio_pf3>; - #address-cells=<1>; + #address-cells = <1>; #size-cells = <0>; /* on-board RGMII PHY */ @@ -104,6 +107,123 @@ reg = <5>; }; }; + + mdio_slot1: mdio@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + mdio_slot2: mdio@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + mdio_slot3: mdio@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + mdio_slot4: mdio@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +&can0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&dspi0 { + bus-num = <0>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <0>; + spi-max-frequency = <10000000>; + }; + + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <1>; + spi-max-frequency = <10000000>; + }; + + flash@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <2>; + spi-max-frequency = <10000000>; + }; +}; + +&dspi1 { + bus-num = <1>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <0>; + spi-max-frequency = <10000000>; + }; + + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <1>; + spi-max-frequency = <10000000>; + }; + + flash@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <2>; + spi-max-frequency = <10000000>; + }; +}; + +&dspi2 { + bus-num = <2>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <0>; + spi-max-frequency = <10000000>; }; }; @@ -115,6 +235,16 @@ status = "okay"; }; +&enetc_port1 { + phy-handle = <&qds_phy1>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&enetc_port2 { + status = "okay"; +}; + &esdhc { status = "okay"; }; @@ -138,6 +268,10 @@ }; }; +&ftm_alarm1 { + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -176,11 +310,6 @@ vcc-supply = <&sb_3v3>; }; - rtc@51 { - compatible = "nxp,pcf2129"; - reg = <0x51>; - }; - eeprom@56 { compatible = "atmel,24c512"; reg = <0x56>; @@ -222,9 +351,26 @@ }; -&enetc_port1 { - phy-handle = <&qds_phy1>; - phy-connection-type = "rgmii-id"; +&i2c1 { + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + }; +}; + +&lpuart0 { + status = "okay"; +}; + +&lpuart1 { + status = "okay"; +}; + +&mscc_felix_port4 { + ethernet = <&enetc_port2>; + status = "okay"; }; &sai1 { @@ -234,3 +380,13 @@ &sata { status = "okay"; }; + +&usb0 { + dr_mode = "host"; + status = "okay"; +}; + +&usb1 { + dr_mode = "host"; + status = "okay"; +}; |