summaryrefslogtreecommitdiffstats
path: root/dts/src/arm64/freescale/fsl-ls1028a.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm64/freescale/fsl-ls1028a.dtsi')
-rw-r--r--dts/src/arm64/freescale/fsl-ls1028a.dtsi345
1 files changed, 262 insertions, 83 deletions
diff --git a/dts/src/arm64/freescale/fsl-ls1028a.dtsi b/dts/src/arm64/freescale/fsl-ls1028a.dtsi
index 343ecf0e89..ae534c23b9 100644
--- a/dts/src/arm64/freescale/fsl-ls1028a.dtsi
+++ b/dts/src/arm64/freescale/fsl-ls1028a.dtsi
@@ -28,6 +28,12 @@
reg = <0x0>;
enable-method = "psci";
clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PW20>;
#cooling-cells = <2>;
@@ -39,6 +45,12 @@
reg = <0x1>;
enable-method = "psci";
clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+ i-cache-size = <0xc000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PW20>;
#cooling-cells = <2>;
@@ -46,6 +58,11 @@
l2: l2-cache {
compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ cache-size = <0x100000>;
+ cache-line-size = <64>;
+ cache-sets = <1024>;
};
};
@@ -66,6 +83,13 @@
};
};
+ rtc_clk: rtc-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "rtc_clk";
+ };
+
sysclk: sysclk {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -80,13 +104,6 @@
clock-output-names = "phy_27m";
};
- dpclk: clock-controller@f1f0000 {
- compatible = "fsl,ls1028a-plldig";
- reg = <0x0 0xf1f0000 0x0 0xffff>;
- #clock-cells = <0>;
- clocks = <&osc_27m>;
- };
-
firmware {
optee: optee {
compatible = "linaro,optee-tz";
@@ -96,7 +113,7 @@
};
reboot {
- compatible ="syscon-reboot";
+ compatible = "syscon-reboot";
regmap = <&rst>;
offset = <0>;
mask = <0x02>;
@@ -120,17 +137,17 @@
};
gic: interrupt-controller@6000000 {
- compatible= "arm,gic-v3";
+ compatible = "arm,gic-v3";
#address-cells = <2>;
#size-cells = <2>;
ranges;
- reg= <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+ reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
<0x0 0x06040000 0 0x40000>; /* GIC Redistributor */
- #interrupt-cells= <3>;
+ #interrupt-cells = <3>;
interrupt-controller;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
IRQ_TYPE_LEVEL_LOW)>;
- its: gic-its@6020000 {
+ its: msi-controller@6020000 {
compatible = "arm,gic-v3-its";
msi-controller;
reg = <0x0 0x06020000 0 0x20000>;/* GIC Translater */
@@ -224,6 +241,20 @@
little-endian;
};
+ sfp: efuse@1e80000 {
+ compatible = "fsl,ls1028a-sfp";
+ reg = <0x0 0x1e80000 0x0 0x10000>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
+ clock-names = "sfp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ls1028a_uid: unique-id@1c {
+ reg = <0x1c 0x8>;
+ };
+ };
+
scfg: syscon@1fc0000 {
compatible = "fsl,ls1028a-scfg", "syscon";
reg = <0x0 0x1fc0000 0x0 0x10000>;
@@ -405,9 +436,9 @@
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>; /* fixed up by bootloader */
clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
- voltage-ranges = <1800 1800 3300 3300>;
+ voltage-ranges = <1800 1800>;
sdhci,auto-cmd12;
- broken-cd;
+ non-removable;
little-endian;
bus-width = <4>;
status = "disabled";
@@ -588,20 +619,20 @@
compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
reg = <0x0 0x3100000 0x0 0x10000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- dr_mode = "host";
snps,dis_rxdet_inp3_quirk;
snps,quirk-frame-length-adjustment = <0x20>;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ status = "disabled";
};
usb1: usb@3110000 {
compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
reg = <0x0 0x3110000 0x0 0x10000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
- dr_mode = "host";
snps,dis_rxdet_inp3_quirk;
snps,quirk-frame-length-adjustment = <0x20>;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ status = "disabled";
};
sata: sata@3200000 {
@@ -642,6 +673,18 @@
status = "disabled";
};
+ pcie_ep1: pcie-ep@3400000 {
+ compatible = "fsl,ls1028a-pcie-ep","fsl,ls-pcie-ep";
+ reg = <0x00 0x03400000 0x0 0x00100000
+ 0x80 0x00000000 0x8 0x00000000>;
+ reg-names = "regs", "addr_space";
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+ interrupt-names = "pme";
+ num-ib-windows = <6>;
+ num-ob-windows = <8>;
+ status = "disabled";
+ };
+
pcie2: pcie@3500000 {
compatible = "fsl,ls1028a-pcie";
reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
@@ -669,11 +712,24 @@
status = "disabled";
};
+ pcie_ep2: pcie-ep@3500000 {
+ compatible = "fsl,ls1028a-pcie-ep","fsl,ls-pcie-ep";
+ reg = <0x00 0x03500000 0x0 0x00100000
+ 0x88 0x00000000 0x8 0x00000000>;
+ reg-names = "regs", "addr_space";
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+ interrupt-names = "pme";
+ num-ib-windows = <6>;
+ num-ob-windows = <8>;
+ status = "disabled";
+ };
+
smmu: iommu@5000000 {
compatible = "arm,mmu-500";
reg = <0 0x5000000 0 0x800000>;
#global-interrupts = <8>;
#iommu-cells = <1>;
+ dma-coherent;
stream-match-mask = <0x7c00>;
/* global secure fault */
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
@@ -734,28 +790,28 @@
sec_jr0: jr@10000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x10000 0x10000>;
+ reg = <0x10000 0x10000>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr1: jr@20000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x20000 0x10000>;
+ reg = <0x20000 0x10000>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr2: jr@30000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x30000 0x10000>;
+ reg = <0x30000 0x10000>;
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr3: jr@40000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x40000 0x10000>;
+ reg = <0x40000 0x10000>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -800,6 +856,38 @@
clock-names = "wdog_clk", "apb_pclk";
};
+ malidp0: display@f080000 {
+ compatible = "arm,mali-dp500";
+ reg = <0x0 0xf080000 0x0 0x10000>;
+ interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
+ <0 223 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "DE", "SE";
+ clocks = <&dpclk>,
+ <&clockgen QORIQ_CLK_HWACCEL 2>,
+ <&clockgen QORIQ_CLK_HWACCEL 2>,
+ <&clockgen QORIQ_CLK_HWACCEL 2>;
+ clock-names = "pxlclk", "mclk", "aclk", "pclk";
+ arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
+ arm,malidp-arqos-value = <0xd000d000>;
+
+ port {
+ dpi0_out: endpoint {
+
+ };
+ };
+ };
+
+ gpu: gpu@f0c0000 {
+ compatible = "vivante,gc";
+ reg = <0x0 0xf0c0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen QORIQ_CLK_HWACCEL 2>,
+ <&clockgen QORIQ_CLK_HWACCEL 2>,
+ <&clockgen QORIQ_CLK_HWACCEL 2>;
+ clock-names = "core", "shader", "bus";
+ #cooling-cells = <2>;
+ };
+
sai1: audio-controller@f100000 {
#sound-dai-cells = <0>;
compatible = "fsl,vf610-sai";
@@ -926,54 +1014,62 @@
status = "disabled";
};
+ dpclk: clock-controller@f1f0000 {
+ compatible = "fsl,ls1028a-plldig";
+ reg = <0x0 0xf1f0000 0x0 0x10000>;
+ #clock-cells = <0>;
+ clocks = <&osc_27m>;
+ };
+
tmu: tmu@1f80000 {
compatible = "fsl,qoriq-tmu";
reg = <0x0 0x1f80000 0x0 0x10000>;
interrupts = <0 23 0x4>;
fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
- fsl,tmu-calibration = <0x00000000 0x00000024
- 0x00000001 0x0000002b
- 0x00000002 0x00000031
- 0x00000003 0x00000038
- 0x00000004 0x0000003f
- 0x00000005 0x00000045
- 0x00000006 0x0000004c
- 0x00000007 0x00000053
- 0x00000008 0x00000059
- 0x00000009 0x00000060
- 0x0000000a 0x00000066
- 0x0000000b 0x0000006d
-
- 0x00010000 0x0000001c
- 0x00010001 0x00000024
- 0x00010002 0x0000002c
- 0x00010003 0x00000035
- 0x00010004 0x0000003d
- 0x00010005 0x00000045
- 0x00010006 0x0000004d
- 0x00010007 0x00000055
- 0x00010008 0x0000005e
- 0x00010009 0x00000066
- 0x0001000a 0x0000006e
-
- 0x00020000 0x00000018
- 0x00020001 0x00000022
- 0x00020002 0x0000002d
- 0x00020003 0x00000038
- 0x00020004 0x00000043
- 0x00020005 0x0000004d
- 0x00020006 0x00000058
- 0x00020007 0x00000063
- 0x00020008 0x0000006e
-
- 0x00030000 0x00000010
- 0x00030001 0x0000001c
- 0x00030002 0x00000029
- 0x00030003 0x00000036
- 0x00030004 0x00000042
- 0x00030005 0x0000004f
- 0x00030006 0x0000005b
- 0x00030007 0x00000068>;
+ fsl,tmu-calibration =
+ <0x00000000 0x00000024>,
+ <0x00000001 0x0000002b>,
+ <0x00000002 0x00000031>,
+ <0x00000003 0x00000038>,
+ <0x00000004 0x0000003f>,
+ <0x00000005 0x00000045>,
+ <0x00000006 0x0000004c>,
+ <0x00000007 0x00000053>,
+ <0x00000008 0x00000059>,
+ <0x00000009 0x00000060>,
+ <0x0000000a 0x00000066>,
+ <0x0000000b 0x0000006d>,
+
+ <0x00010000 0x0000001c>,
+ <0x00010001 0x00000024>,
+ <0x00010002 0x0000002c>,
+ <0x00010003 0x00000035>,
+ <0x00010004 0x0000003d>,
+ <0x00010005 0x00000045>,
+ <0x00010006 0x0000004d>,
+ <0x00010007 0x00000055>,
+ <0x00010008 0x0000005e>,
+ <0x00010009 0x00000066>,
+ <0x0001000a 0x0000006e>,
+
+ <0x00020000 0x00000018>,
+ <0x00020001 0x00000022>,
+ <0x00020002 0x0000002d>,
+ <0x00020003 0x00000038>,
+ <0x00020004 0x00000043>,
+ <0x00020005 0x0000004d>,
+ <0x00020006 0x00000058>,
+ <0x00020007 0x00000063>,
+ <0x00020008 0x0000006e>,
+
+ <0x00030000 0x00000010>,
+ <0x00030001 0x0000001c>,
+ <0x00030002 0x00000029>,
+ <0x00030003 0x00000036>,
+ <0x00030004 0x00000042>,
+ <0x00030005 0x0000004f>,
+ <0x00030006 0x0000005b>,
+ <0x00030007 0x00000068>;
little-endian;
#thermal-sensor-cells = <1>;
};
@@ -1025,6 +1121,7 @@
fixed-link {
speed = <2500>;
full-duplex;
+ pause;
};
};
@@ -1049,7 +1146,7 @@
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
- ports {
+ mscc_felix_ports: ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1078,22 +1175,26 @@
mscc_felix_port4: port@4 {
reg = <4>;
phy-mode = "internal";
+ ethernet = <&enetc_port2>;
status = "disabled";
fixed-link {
speed = <2500>;
full-duplex;
+ pause;
};
};
mscc_felix_port5: port@5 {
reg = <5>;
phy-mode = "internal";
+ ethernet = <&enetc_port3>;
status = "disabled";
fixed-link {
speed = <1000>;
full-duplex;
+ pause;
};
};
};
@@ -1108,6 +1209,7 @@
fixed-link {
speed = <1000>;
full-duplex;
+ pause;
};
};
@@ -1124,6 +1226,94 @@
reg = <0x01 0xf0800000 0x0 0x10000>;
};
+ pwm0: pwm@2800000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2800000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&rtc_clk>, <&clockgen 4 1>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@2810000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2810000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&rtc_clk>, <&clockgen 4 1>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@2820000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2820000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&rtc_clk>, <&clockgen 4 1>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@2830000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2830000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&rtc_clk>, <&clockgen 4 1>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@2840000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2840000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&rtc_clk>, <&clockgen 4 1>;
+ status = "disabled";
+ };
+
+ pwm5: pwm@2850000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2850000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&rtc_clk>, <&clockgen 4 1>;
+ status = "disabled";
+ };
+
+ pwm6: pwm@2860000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2860000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&rtc_clk>, <&clockgen 4 1>;
+ status = "disabled";
+ };
+
+ pwm7: pwm@2870000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2870000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&rtc_clk>, <&clockgen 4 1>;
+ status = "disabled";
+ };
+
rcpm: power-controller@1e34040 {
compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+";
reg = <0x0 0x1e34040 0x0 0x1c>;
@@ -1136,27 +1326,16 @@
reg = <0x0 0x2800000 0x0 0x10000>;
fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
- };
- malidp0: display@f080000 {
- compatible = "arm,mali-dp500";
- reg = <0x0 0xf080000 0x0 0x10000>;
- interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
- <0 223 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "DE", "SE";
- clocks = <&dpclk>,
- <&clockgen QORIQ_CLK_HWACCEL 2>,
- <&clockgen QORIQ_CLK_HWACCEL 2>,
- <&clockgen QORIQ_CLK_HWACCEL 2>;
- clock-names = "pxlclk", "mclk", "aclk", "pclk";
- arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
- arm,malidp-arqos-value = <0xd000d000>;
-
- port {
- dp0_out: endpoint {
-
- };
+ ftm_alarm1: timer@2810000 {
+ compatible = "fsl,ls1028a-ftm-alarm";
+ reg = <0x0 0x2810000 0x0 0x10000>;
+ fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
};
+
};
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-25 12:11:24 +0000