diff options
Diffstat (limited to 'dts/src/arm64/freescale/fsl-ls1043a.dtsi')
-rw-r--r-- | dts/src/arm64/freescale/fsl-ls1043a.dtsi | 249 |
1 files changed, 133 insertions, 116 deletions
diff --git a/dts/src/arm64/freescale/fsl-ls1043a.dtsi b/dts/src/arm64/freescale/fsl-ls1043a.dtsi index 21200cbf71..d333b773bc 100644 --- a/dts/src/arm64/freescale/fsl-ls1043a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1043a.dtsi @@ -11,6 +11,7 @@ #include <dt-bindings/clock/fsl,qoriq-clockgen.h> #include <dt-bindings/thermal/thermal.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/gpio/gpio.h> / { compatible = "fsl,ls1043a"; @@ -83,6 +84,8 @@ l2: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; @@ -144,7 +147,7 @@ }; reboot { - compatible ="syscon-reboot"; + compatible = "syscon-reboot"; regmap = <&dcfg>; offset = <0xb0>; mask = <0x02>; @@ -300,6 +303,8 @@ #address-cells = <2>; #size-cells = <2>; ranges; + dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>; + dma-coherent; clockgen: clocking@1ee1000 { compatible = "fsl,ls1043a-clockgen"; @@ -354,7 +359,7 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x10000 0x10000>; + reg = <0x10000 0x10000>; interrupts = <0 71 0x4>; }; @@ -362,7 +367,7 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x20000 0x10000>; + reg = <0x20000 0x10000>; interrupts = <0 72 0x4>; }; @@ -370,7 +375,7 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x30000 0x10000>; + reg = <0x30000 0x10000>; interrupts = <0 73 0x4>; }; @@ -378,14 +383,22 @@ compatible = "fsl,sec-v5.4-job-ring", "fsl,sec-v5.0-job-ring", "fsl,sec-v4.0-job-ring"; - reg = <0x40000 0x10000>; + reg = <0x40000 0x10000>; interrupts = <0 74 0x4>; }; }; + sfp: efuse@1e80000 { + compatible = "fsl,ls1021a-sfp"; + reg = <0x0 0x1e80000 0x0 0x10000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; + clock-names = "sfp"; + }; + dcfg: dcfg@1ee0000 { compatible = "fsl,ls1043a-dcfg", "syscon"; - reg = <0x0 0x1ee0000 0x0 0x10000>; + reg = <0x0 0x1ee0000 0x0 0x1000>; big-endian; }; @@ -434,46 +447,47 @@ reg = <0x0 0x1f00000 0x0 0x10000>; interrupts = <0 33 0x4>; fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>; - fsl,tmu-calibration = <0x00000000 0x00000023 - 0x00000001 0x0000002a - 0x00000002 0x00000031 - 0x00000003 0x00000037 - 0x00000004 0x0000003e - 0x00000005 0x00000044 - 0x00000006 0x0000004b - 0x00000007 0x00000051 - 0x00000008 0x00000058 - 0x00000009 0x0000005e - 0x0000000a 0x00000065 - 0x0000000b 0x0000006b - - 0x00010000 0x00000023 - 0x00010001 0x0000002b - 0x00010002 0x00000033 - 0x00010003 0x0000003b - 0x00010004 0x00000043 - 0x00010005 0x0000004b - 0x00010006 0x00000054 - 0x00010007 0x0000005c - 0x00010008 0x00000064 - 0x00010009 0x0000006c - - 0x00020000 0x00000021 - 0x00020001 0x0000002c - 0x00020002 0x00000036 - 0x00020003 0x00000040 - 0x00020004 0x0000004b - 0x00020005 0x00000055 - 0x00020006 0x0000005f - - 0x00030000 0x00000013 - 0x00030001 0x0000001d - 0x00030002 0x00000028 - 0x00030003 0x00000032 - 0x00030004 0x0000003d - 0x00030005 0x00000047 - 0x00030006 0x00000052 - 0x00030007 0x0000005c>; + fsl,tmu-calibration = + <0x00000000 0x00000023>, + <0x00000001 0x0000002a>, + <0x00000002 0x00000031>, + <0x00000003 0x00000037>, + <0x00000004 0x0000003e>, + <0x00000005 0x00000044>, + <0x00000006 0x0000004b>, + <0x00000007 0x00000051>, + <0x00000008 0x00000058>, + <0x00000009 0x0000005e>, + <0x0000000a 0x00000065>, + <0x0000000b 0x0000006b>, + + <0x00010000 0x00000023>, + <0x00010001 0x0000002b>, + <0x00010002 0x00000033>, + <0x00010003 0x0000003b>, + <0x00010004 0x00000043>, + <0x00010005 0x0000004b>, + <0x00010006 0x00000054>, + <0x00010007 0x0000005c>, + <0x00010008 0x00000064>, + <0x00010009 0x0000006c>, + + <0x00020000 0x00000021>, + <0x00020001 0x0000002c>, + <0x00020002 0x00000036>, + <0x00020003 0x00000040>, + <0x00020004 0x0000004b>, + <0x00020005 0x00000055>, + <0x00020006 0x0000005f>, + + <0x00030000 0x00000013>, + <0x00030001 0x0000001d>, + <0x00030002 0x00000028>, + <0x00030003 0x00000032>, + <0x00030004 0x0000003d>, + <0x00030005 0x00000047>, + <0x00030006 0x00000052>, + <0x00030007 0x0000005c>; #thermal-sensor-cells = <1>; }; @@ -513,22 +527,8 @@ status = "disabled"; }; - dspi1: spi@2110000 { - compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2110000 0x0 0x10000>; - interrupts = <0 65 0x4>; - clock-names = "dspi"; - clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL - QORIQ_CLK_PLL_DIV(1)>; - spi-num-chipselects = <5>; - big-endian; - status = "disabled"; - }; - i2c0: i2c@2180000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2180000 0x0 0x10000>; @@ -543,7 +543,7 @@ }; i2c1: i2c@2190000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2190000 0x0 0x10000>; @@ -551,11 +551,12 @@ clock-names = "i2c"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; + scl-gpios = <&gpio4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; i2c2: i2c@21a0000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x21a0000 0x0 0x10000>; @@ -563,11 +564,12 @@ clock-names = "i2c"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; + scl-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; i2c3: i2c@21b0000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x21b0000 0x0 0x10000>; @@ -575,6 +577,7 @@ clock-names = "i2c"; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>; + scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; @@ -784,7 +787,7 @@ big-endian; }; - edma0: edma@2c00000 { + edma0: dma-controller@2c00000 { #dma-cells = <2>; compatible = "fsl,vf610-edma"; reg = <0x0 0x2c00000 0x0 0x10000>, @@ -802,48 +805,59 @@ QORIQ_CLK_PLL_DIV(1)>; }; - usb0: usb@2f00000 { - compatible = "snps,dwc3"; - reg = <0x0 0x2f00000 0x0 0x10000>; - interrupts = <0 60 0x4>; - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - status = "disabled"; - }; + aux_bus: aux_bus { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>; + + usb0: usb@2f00000 { + compatible = "snps,dwc3"; + reg = <0x0 0x2f00000 0x0 0x10000>; + interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + usb3-lpm-capable; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + status = "disabled"; + }; - usb1: usb@3000000 { - compatible = "snps,dwc3"; - reg = <0x0 0x3000000 0x0 0x10000>; - interrupts = <0 61 0x4>; - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - status = "disabled"; - }; + usb1: usb@3000000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3000000 0x0 0x10000>; + interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + usb3-lpm-capable; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + status = "disabled"; + }; - usb2: usb@3100000 { - compatible = "snps,dwc3"; - reg = <0x0 0x3100000 0x0 0x10000>; - interrupts = <0 63 0x4>; - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - status = "disabled"; - }; + usb2: usb@3100000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + usb3-lpm-capable; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + status = "disabled"; + }; - sata: sata@3200000 { - compatible = "fsl,ls1043a-ahci"; - reg = <0x0 0x3200000 0x0 0x10000>, - <0x0 0x20140520 0x0 0x4>; - reg-names = "ahci", "sata-ecc"; - interrupts = <0 69 0x4>; - clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL - QORIQ_CLK_PLL_DIV(1)>; - dma-coherent; + sata: sata@3200000 { + compatible = "fsl,ls1043a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x0 0x20140520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(1)>; + dma-coherent; + }; }; msi1: msi-controller1@1571000 { @@ -872,13 +886,12 @@ reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ <0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 118 0x4>, /* controller interrupt */ - <0 117 0x4>; /* PME interrupt */ - interrupt-names = "intr", "pme"; + interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>, + <0 118 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - dma-coherent; num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -890,6 +903,8 @@ <0000 0 0 2 &gic 0 111 0x4>, <0000 0 0 3 &gic 0 112 0x4>, <0000 0 0 4 &gic 0 113 0x4>; + fsl,pcie-scfg = <&scfg 0>; + big-endian; status = "disabled"; }; @@ -898,13 +913,12 @@ reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ <0x48 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 128 0x4>, - <0 127 0x4>; - interrupt-names = "intr", "pme"; + interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>, + <0 128 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - dma-coherent; num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -916,6 +930,8 @@ <0000 0 0 2 &gic 0 121 0x4>, <0000 0 0 3 &gic 0 122 0x4>, <0000 0 0 4 &gic 0 123 0x4>; + fsl,pcie-scfg = <&scfg 1>; + big-endian; status = "disabled"; }; @@ -924,13 +940,12 @@ reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */ <0x50 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 162 0x4>, - <0 161 0x4>; - interrupt-names = "intr", "pme"; + interrupts = <0 161 IRQ_TYPE_LEVEL_HIGH>, + <0 162 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - dma-coherent; num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -942,6 +957,8 @@ <0000 0 0 2 &gic 0 155 0x4>, <0000 0 0 3 &gic 0 156 0x4>, <0000 0 0 4 &gic 0 157 0x4>; + fsl,pcie-scfg = <&scfg 2>; + big-endian; status = "disabled"; }; |