diff options
Diffstat (limited to 'dts/src/arm64/freescale/imx8mm-mx8menlo.dts')
| -rw-r--r-- | dts/src/arm64/freescale/imx8mm-mx8menlo.dts | 334 |
1 files changed, 334 insertions, 0 deletions
diff --git a/dts/src/arm64/freescale/imx8mm-mx8menlo.dts b/dts/src/arm64/freescale/imx8mm-mx8menlo.dts new file mode 100644 index 0000000000..92eaf4ef45 --- /dev/null +++ b/dts/src/arm64/freescale/imx8mm-mx8menlo.dts @@ -0,0 +1,334 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright 2021-2022 Marek Vasut <marex@denx.de> + */ + +/dts-v1/; + +#include "imx8mm-verdin.dtsi" + +/ { + model = "MENLO MX8MM EMBEDDED DEVICE"; + compatible = "menlo,mx8menlo", + "toradex,verdin-imx8mm", + "fsl,imx8mm"; + + /delete-node/ gpio-keys; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + + user1 { + label = "TestLed601"; + gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + }; + + user2 { + label = "TestLed602"; + gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + beeper { + compatible = "gpio-beeper"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_beeper>; + gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; + }; + + /* Fixed clock dedicated to SPI CAN on carrier board */ + clk_xtal20: clk-xtal20 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <20000000>; + }; +}; + +&ecspi1 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; + + /* CAN controller on the baseboard */ + canfd: can@0 { + compatible = "microchip,mcp2518fd"; + clocks = <&clk_xtal20>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + reg = <0>; + spi-max-frequency = <2000000>; + }; + +}; + +&ecspi2 { + pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_gpio1>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, <&gpio3 4 GPIO_ACTIVE_LOW>; + status = "okay"; + + spidev@0 { + compatible = "menlo,m53cpld"; + reg = <0>; + spi-max-frequency = <25000000>; + }; + + spidev@1 { + compatible = "menlo,m53cpld"; + reg = <1>; + spi-max-frequency = <25000000>; + }; + +}; + +ðphy0 { + max-speed = <100>; +}; + +&fec1 { + status = "okay"; +}; + +&flexspi { + status = "okay"; + + flash@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <66000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + }; +}; + +&gpio1 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "DISP_reset", "KBD_intI", + "", "", "", "", + "", "", "", ""; +}; + +&gpio4 { + /* + * CPLD_D[n] is ARM_CPLD[n] in schematic + * CPLD_int is SA_INTERRUPT in schematic + * CPLD_reset is RESET_SOFT in schematic + */ + gpio-line-names = + "CPLD_D[1]", "CPLD_int", "CPLD_reset", "", + "", "CPLD_D[0]", "", "", + "", "", "", "CPLD_D[2]", + "CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]", "CPLD_D[6]", + "CPLD_D[7]", "", "", "", + "", "", "", "", + "", "", "", "KBD_intK", + "", "", "", ""; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio_expander_21 { + status = "okay"; +}; + +&hwmon { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + /* None of this is present on the SoM. */ + /delete-node/ bridge@2c; + /delete-node/ hdmi@48; + /delete-node/ touch@4a; + /delete-node/ sensor@4f; + /delete-node/ eeprom@50; + /delete-node/ eeprom@57; +}; + +&iomuxc { + pinctrl-0 = <&pinctrl_gpio7>, <&pinctrl_gpio_hog1>, + <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>; + + pinctrl_beeper: beepergrp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x1c4 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x4 + MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x4 + MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x1c4 + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x1c4 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x1c4 + MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x1c4 + >; + }; + + pinctrl_uart4_rts: uart4rtsgrp { + fsl,pins = < + /* SODIMM 222 */ + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x184 + >; + }; +}; + +&pinctrl_gpio1 { + fsl,pins = < + /* SODIMM 206 */ + MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x1c4 + >; +}; + +&pinctrl_gpio_hog1 { + fsl,pins = < + /* SODIMM 88 */ + MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20 0x1c4 + /* CPLD_int */ + MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x1c4 + /* CPLD_reset */ + MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x1c4 + /* SODIMM 94 */ + MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x1c4 + /* SODIMM 96 */ + MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x1c4 + /* CPLD_D[7] */ + MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x1c4 + /* CPLD_D[6] */ + MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x1c4 + /* CPLD_D[5] */ + MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x1c4 + /* CPLD_D[4] */ + MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x1c4 + /* CPLD_D[3] */ + MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x1c4 + /* CPLD_D[2] */ + MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x1c4 + /* CPLD_D[1] */ + MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x1c4 + /* CPLD_D[0] */ + MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x1c4 + /* KBD_intK */ + MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x1c4 + /* DISP_reset */ + MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x1c4 + /* KBD_intI */ + MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x1c4 + /* SODIMM 46 */ + MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x1c4 + >; +}; + +&pinctrl_uart1 { + fsl,pins = < + /* SODIMM 149 */ + MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x1c4 + /* SODIMM 147 */ + MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x1c4 + /* SODIMM 210 */ + MX8MM_IOMUXC_UART3_RXD_UART1_DTE_RTS_B 0x1c4 + /* SODIMM 212 */ + MX8MM_IOMUXC_UART3_TXD_UART1_DTE_CTS_B 0x1c4 + >; +}; + +®_usb_otg1_vbus { + /delete-property/ enable-active-high; + gpio = <&gpio1 12 GPIO_ACTIVE_LOW>; +}; + +®_usb_otg2_vbus { + /delete-property/ enable-active-high; + gpio = <&gpio1 14 GPIO_ACTIVE_LOW>; +}; + +&sai2 { + status = "disabled"; +}; + +&uart1 { + uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart4 { + pinctrl-0 = <&pinctrl_uart4 &pinctrl_uart4_rts>; + linux,rs485-enabled-at-boot-time; + rts-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + status = "okay"; +}; + +&usdhc2 { + status = "okay"; +}; |