diff options
Diffstat (limited to 'dts/src/arm64/freescale/imx8mm-var-som-symphony.dts')
| -rw-r--r-- | dts/src/arm64/freescale/imx8mm-var-som-symphony.dts | 255 |
1 files changed, 255 insertions, 0 deletions
diff --git a/dts/src/arm64/freescale/imx8mm-var-som-symphony.dts b/dts/src/arm64/freescale/imx8mm-var-som-symphony.dts new file mode 100644 index 0000000000..ac1fe1530a --- /dev/null +++ b/dts/src/arm64/freescale/imx8mm-var-som-symphony.dts @@ -0,0 +1,255 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Krzysztof Kozlowski <krzk@kernel.org> + */ + +/dts-v1/; + +#include "imx8mm-var-som.dtsi" + +/ { + model = "Variscite VAR-SOM-MX8MM Symphony evaluation board"; + compatible = "variscite,var-som-mx8mm-symphony", "variscite,var-som-mx8mm", "fsl,imx8mm"; + + reg_usdhc2_vmmc: regulator-usdhc2-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb_otg2_vbus>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + gpio-keys { + compatible = "gpio-keys"; + + back { + label = "Back"; + gpios = <&pca9534 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + }; + + home { + label = "Home"; + gpios = <&pca9534 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + }; + + menu { + label = "Menu"; + gpios = <&pca9534 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_MENU>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led { + label = "Heartbeat"; + gpios = <&pca9534 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +ðphy { + reset-gpios = <&pca9534 5 GPIO_ACTIVE_HIGH>; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pca9534: gpio@20 { + compatible = "nxp,pca9534"; + reg = <0x20>; + gpio-controller; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pca9534>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + #gpio-cells = <2>; + wakeup-source; + + /* USB 3.0 OTG (usbotg1) / SATA port switch, set to USB 3.0 */ + usb3-sata-sel-hog { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "usb3_sata_sel"; + }; + + som-vselect-hog { + gpio-hog; + gpios = <6 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "som_vselect"; + }; + + enet-sel-hog { + gpio-hog; + gpios = <7 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "enet_sel"; + }; + }; + + extcon_usbotg1: typec@3d { + compatible = "nxp,ptn5150"; + reg = <0x3d>; + interrupt-parent = <&gpio1>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ptn5150>; + status = "okay"; + }; +}; + +&i2c3 { + /* Capacitive touch controller */ + ft5x06_ts: touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_captouch>; + interrupt-parent = <&gpio5>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-inverted-x; + touchscreen-inverted-y; + }; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; +}; + +/* Header */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* Header */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbotg1 { + disable-over-current; + extcon = <&extcon_usbotg1>, <&extcon_usbotg1>; +}; + +&usbotg2 { + dr_mode = "host"; + vbus-supply = <®_usb_otg2_vbus>; + srp-disable; + hnp-disable; + adp-disable; + disable-over-current; + /delete-property/ usb-role-switch; + /* + * FIXME: having USB2 enabled hangs the boot just after: + * [ 1.943365] ci_hdrc ci_hdrc.1: EHCI Host Controller + * [ 1.948287] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 + * [ 1.971006] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 + * [ 1.977203] hub 1-0:1.0: USB hub found + * [ 1.980987] hub 1-0:1.0: 1 port detected + */ + status = "disabled"; +}; + +&pinctrl_fec1 { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + /* Remove the MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 as not used */ + >; +}; + +&iomuxc { + pinctrl_captouch: captouchgrp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x16 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_pca9534: pca9534grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x16 + >; + }; + + pinctrl_ptn5150: ptn5150grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x16 + >; + }; + + pinctrl_reg_usb_otg2_vbus: regusbotg2vbusgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1 0x16 + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + >; + }; +}; |