diff options
Diffstat (limited to 'dts/src/arm64/freescale/imx8mm.dtsi')
| -rw-r--r-- | dts/src/arm64/freescale/imx8mm.dtsi | 733 |
1 files changed, 733 insertions, 0 deletions
diff --git a/dts/src/arm64/freescale/imx8mm.dtsi b/dts/src/arm64/freescale/imx8mm.dtsi new file mode 100644 index 0000000000..6b407a94c0 --- /dev/null +++ b/dts/src/arm64/freescale/imx8mm.dtsi @@ -0,0 +1,733 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 NXP + */ + +#include <dt-bindings/clock/imx8mm-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> + +#include "imx8mm-pinfunc.h" + +/ { + compatible = "fsl,imx8mm"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ethernet0 = &fec1; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + A53_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clk IMX8MM_CLK_ARM>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; + }; + + A53_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clk IMX8MM_CLK_ARM>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; + }; + + A53_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clk IMX8MM_CLK_ARM>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; + }; + + A53_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clk IMX8MM_CLK_ARM>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; + }; + + A53_L2: l2-cache0 { + compatible = "cache"; + }; + }; + + a53_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <850000>; + clock-latency-ns = <150000>; + }; + + opp-1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <900000>; + clock-latency-ns = <150000>; + opp-suspend; + }; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + osc_32k: clock-osc-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "osc_32k"; + }; + + osc_24m: clock-osc-24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc_24m"; + }; + + clk_ext1: clock-ext1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext1"; + }; + + clk_ext2: clock-ext2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext2"; + }; + + clk_ext3: clock-ext3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext3"; + }; + + clk_ext4: clock-ext4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency= <133000000>; + clock-output-names = "clk_ext4"; + }; + + gic: interrupt-controller@38800000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x38800000 0 0x10000>, /* GIC Dist */ + <0x0 0x38880000 0 0xC0000>; /* GICR (RD_base + SGI_base) */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */ + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */ + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */ + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */ + clock-frequency = <8000000>; + arm,no-tick-in-suspend; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x3e000000>; + + aips1: bus@30000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio1: gpio@30200000 { + compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; + reg = <0x30200000 0x10000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@30210000 { + compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; + reg = <0x30210000 0x10000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@30220000 { + compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; + reg = <0x30220000 0x10000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@30230000 { + compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; + reg = <0x30230000 0x10000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@30240000 { + compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; + reg = <0x30240000 0x10000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + wdog1: watchdog@30280000 { + compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt"; + reg = <0x30280000 0x10000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_WDOG1_ROOT>; + status = "disabled"; + }; + + wdog2: watchdog@30290000 { + compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt"; + reg = <0x30290000 0x10000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_WDOG2_ROOT>; + status = "disabled"; + }; + + wdog3: watchdog@302a0000 { + compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt"; + reg = <0x302a0000 0x10000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_WDOG3_ROOT>; + status = "disabled"; + }; + + sdma2: dma-controller@302c0000 { + compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma"; + reg = <0x302c0000 0x10000>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>, + <&clk IMX8MM_CLK_SDMA2_ROOT>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + + sdma3: dma-controller@302b0000 { + compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma"; + reg = <0x302b0000 0x10000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>, + <&clk IMX8MM_CLK_SDMA3_ROOT>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + + iomuxc: pinctrl@30330000 { + compatible = "fsl,imx8mm-iomuxc"; + reg = <0x30330000 0x10000>; + }; + + gpr: iomuxc-gpr@30340000 { + compatible = "fsl,imx8mm-iomuxc-gpr", "syscon"; + reg = <0x30340000 0x10000>; + }; + + ocotp: ocotp-ctrl@30350000 { + compatible = "fsl,imx8mm-ocotp", "fsl,imx7d-ocotp", "syscon"; + reg = <0x30350000 0x10000>; + clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>; + /* For nvmem subnodes */ + #address-cells = <1>; + #size-cells = <1>; + }; + + anatop: anatop@30360000 { + compatible = "fsl,imx8mm-anatop", "syscon", "simple-bus"; + reg = <0x30360000 0x10000>; + }; + + snvs: snvs@30370000 { + compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd"; + reg = <0x30370000 0x10000>; + + snvs_rtc: snvs-rtc-lp { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + regmap = <&snvs>; + offset = <0x34>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + }; + + snvs_pwrkey: snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + linux,keycode = <KEY_POWER>; + wakeup-source; + }; + }; + + clk: clock-controller@30380000 { + compatible = "fsl,imx8mm-ccm"; + reg = <0x30380000 0x10000>; + #clock-cells = <1>; + clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, + <&clk_ext3>, <&clk_ext4>; + clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", + "clk_ext3", "clk_ext4"; + }; + + src: reset-controller@30390000 { + compatible = "fsl,imx8mm-src", "syscon"; + reg = <0x30390000 0x10000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; + }; + }; + + aips2: bus@30400000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pwm1: pwm@30660000 { + compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; + reg = <0x30660000 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_PWM1_ROOT>, + <&clk IMX8MM_CLK_PWM1_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@30670000 { + compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; + reg = <0x30670000 0x10000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_PWM2_ROOT>, + <&clk IMX8MM_CLK_PWM2_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@30680000 { + compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; + reg = <0x30680000 0x10000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_PWM3_ROOT>, + <&clk IMX8MM_CLK_PWM3_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@30690000 { + compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; + reg = <0x30690000 0x10000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_PWM4_ROOT>, + <&clk IMX8MM_CLK_PWM4_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + }; + + aips3: bus@30800000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ecspi1: spi@30820000 { + compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30820000 0x10000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>, + <&clk IMX8MM_CLK_ECSPI1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ecspi2: spi@30830000 { + compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30830000 0x10000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>, + <&clk IMX8MM_CLK_ECSPI2_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ecspi3: spi@30840000 { + compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30840000 0x10000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>, + <&clk IMX8MM_CLK_ECSPI3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart1: serial@30860000 { + compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; + reg = <0x30860000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_UART1_ROOT>, + <&clk IMX8MM_CLK_UART1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart3: serial@30880000 { + compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; + reg = <0x30880000 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_UART3_ROOT>, + <&clk IMX8MM_CLK_UART3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart2: serial@30890000 { + compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; + reg = <0x30890000 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_UART2_ROOT>, + <&clk IMX8MM_CLK_UART2_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + i2c1: i2c@30a20000 { + compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30a20000 0x10000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_I2C1_ROOT>; + status = "disabled"; + }; + + i2c2: i2c@30a30000 { + compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30a30000 0x10000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_I2C2_ROOT>; + status = "disabled"; + }; + + i2c3: i2c@30a40000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; + reg = <0x30a40000 0x10000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_I2C3_ROOT>; + status = "disabled"; + }; + + i2c4: i2c@30a50000 { + compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30a50000 0x10000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_I2C4_ROOT>; + status = "disabled"; + }; + + uart4: serial@30a60000 { + compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; + reg = <0x30a60000 0x10000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_UART4_ROOT>, + <&clk IMX8MM_CLK_UART4_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + usdhc1: mmc@30b40000 { + compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; + reg = <0x30b40000 0x10000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_NAND_USDHC_BUS>, + <&clk IMX8MM_CLK_USDHC1_ROOT>; + clock-names = "ipg", "ahb", "per"; + assigned-clocks = <&clk IMX8MM_CLK_USDHC1>; + assigned-clock-rates = <400000000>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: mmc@30b50000 { + compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; + reg = <0x30b50000 0x10000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_NAND_USDHC_BUS>, + <&clk IMX8MM_CLK_USDHC2_ROOT>; + clock-names = "ipg", "ahb", "per"; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + usdhc3: mmc@30b60000 { + compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; + reg = <0x30b60000 0x10000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_NAND_USDHC_BUS>, + <&clk IMX8MM_CLK_USDHC3_ROOT>; + clock-names = "ipg", "ahb", "per"; + assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + sdma1: dma-controller@30bd0000 { + compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma"; + reg = <0x30bd0000 0x10000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>, + <&clk IMX8MM_CLK_SDMA1_ROOT>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + + fec1: ethernet@30be0000 { + compatible = "fsl,imx8mm-fec", "fsl,imx6sx-fec"; + reg = <0x30be0000 0x10000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_ENET1_ROOT>, + <&clk IMX8MM_CLK_ENET1_ROOT>, + <&clk IMX8MM_CLK_ENET_TIMER>, + <&clk IMX8MM_CLK_ENET_REF>, + <&clk IMX8MM_CLK_ENET_PHY_REF>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + assigned-clocks = <&clk IMX8MM_CLK_ENET_AXI>, + <&clk IMX8MM_CLK_ENET_TIMER>, + <&clk IMX8MM_CLK_ENET_REF>, + <&clk IMX8MM_CLK_ENET_TIMER>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>, + <&clk IMX8MM_SYS_PLL2_100M>, + <&clk IMX8MM_SYS_PLL2_125M>; + assigned-clock-rates = <0>, <0>, <125000000>, <100000000>; + fsl,num-tx-queues = <3>; + fsl,num-rx-queues = <3>; + status = "disabled"; + }; + + }; + + aips4: bus@32c00000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbotg1: usb@32e40000 { + compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb"; + reg = <0x32e40000 0x200>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>; + clock-names = "usb1_ctrl_root_clk"; + assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>, + <&clk IMX8MM_CLK_USB_CORE_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>, + <&clk IMX8MM_SYS_PLL1_100M>; + fsl,usbphy = <&usbphynop1>; + fsl,usbmisc = <&usbmisc1 0>; + status = "disabled"; + }; + + usbphynop1: usbphynop1 { + compatible = "usb-nop-xceiv"; + clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; + clock-names = "main_clk"; + }; + + usbmisc1: usbmisc@32e40200 { + compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc"; + #index-cells = <1>; + reg = <0x32e40200 0x200>; + }; + + usbotg2: usb@32e50000 { + compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb"; + reg = <0x32e50000 0x200>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>; + clock-names = "usb1_ctrl_root_clk"; + assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>, + <&clk IMX8MM_CLK_USB_CORE_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>, + <&clk IMX8MM_SYS_PLL1_100M>; + fsl,usbphy = <&usbphynop2>; + fsl,usbmisc = <&usbmisc2 0>; + status = "disabled"; + }; + + usbphynop2: usbphynop2 { + compatible = "usb-nop-xceiv"; + clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; + clock-names = "main_clk"; + }; + + usbmisc2: usbmisc@32e50200 { + compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc"; + #index-cells = <1>; + reg = <0x32e50200 0x200>; + }; + + }; + + dma_apbh: dma-controller@33000000 { + compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh"; + reg = <0x33000000 0x2000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; + #dma-cells = <1>; + dma-channels = <4>; + clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; + }; + + gpmi: nand-controller@33002000{ + compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x33002000 0x2000>, <0x33004000 0x4000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "bch"; + clocks = <&clk IMX8MM_CLK_NAND_ROOT>, + <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; + clock-names = "gpmi_io", "gpmi_bch_apb"; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; + status = "disabled"; + }; + }; +}; |