diff options
Diffstat (limited to 'dts/src/arm64/marvell/ac5-98dx25xx.dtsi')
-rw-r--r-- | dts/src/arm64/marvell/ac5-98dx25xx.dtsi | 95 |
1 files changed, 86 insertions, 9 deletions
diff --git a/dts/src/arm64/marvell/ac5-98dx25xx.dtsi b/dts/src/arm64/marvell/ac5-98dx25xx.dtsi index 80b44c7df5..5591939e05 100644 --- a/dts/src/arm64/marvell/ac5-98dx25xx.dtsi +++ b/dts/src/arm64/marvell/ac5-98dx25xx.dtsi @@ -49,6 +49,8 @@ l2: l2-cache { compatible = "cache"; + cache-level = <2>; + cache-unified; }; }; @@ -75,7 +77,6 @@ #address-cells = <2>; #size-cells = <2>; ranges; - dma-ranges; internal-regs@7f000000 { #address-cells = <1>; @@ -95,6 +96,36 @@ status = "okay"; }; + uart1: serial@12100 { + compatible = "snps,dw-apb-uart"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&cnm_clock>; + status = "disabled"; + }; + + uart2: serial@12200 { + compatible = "snps,dw-apb-uart"; + reg = <0x12200 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&cnm_clock>; + status = "disabled"; + }; + + uart3: serial@12300 { + compatible = "snps,dw-apb-uart"; + reg = <0x12300 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&cnm_clock>; + status = "disabled"; + }; + mdio: mdio@22004 { #address-cells = <1>; #size-cells = <0>; @@ -103,7 +134,7 @@ clocks = <&cnm_clock>; }; - i2c0: i2c@11000{ + i2c0: i2c@11000 { compatible = "marvell,mv78230-i2c"; reg = <0x11000 0x20>; #address-cells = <1>; @@ -112,17 +143,17 @@ clocks = <&cnm_clock>; clock-names = "core"; interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency=<100000>; + clock-frequency = <100000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&i2c0_pins>; pinctrl-1 = <&i2c0_gpio>; - scl_gpio = <&gpio0 26 GPIO_ACTIVE_HIGH>; - sda_gpio = <&gpio0 27 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio0 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio0 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; - i2c1: i2c@11100{ + i2c1: i2c@11100 { compatible = "marvell,mv78230-i2c"; reg = <0x11100 0x20>; #address-cells = <1>; @@ -131,13 +162,13 @@ clocks = <&cnm_clock>; clock-names = "core"; interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency=<100000>; + clock-frequency = <100000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&i2c1_pins>; pinctrl-1 = <&i2c1_gpio>; - scl_gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; - sda_gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio0 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio0 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; @@ -172,6 +203,30 @@ }; }; + mmc_dma: bus@80500000 { + compatible = "simple-bus"; + ranges; + #address-cells = <0x2>; + #size-cells = <0x2>; + reg = <0x0 0x80500000 0x0 0x100000>; + dma-ranges = <0x0 0x0 0x2 0x0 0x0 0x80000000>; + dma-coherent; + + sdhci: mmc@805c0000 { + compatible = "marvell,ac5-sdhci", + "marvell,armada-ap806-sdhci"; + reg = <0x0 0x805c0000 0x0 0x1000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&emmc_clock>, <&cnm_clock>; + clock-names = "core", "axi"; + bus-width = <8>; + non-removable; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + }; + }; + /* * Dedicated section for devices behind 32bit controllers so we * can configure specific DMA mapping for them @@ -265,6 +320,16 @@ status = "disabled"; }; + nand: nand-controller@805b0000 { + compatible = "marvell,ac5-nand-controller"; + reg = <0x0 0x805b0000 0x0 0x00000054>; + #address-cells = <0x1>; + #size-cells = <0x0>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&nand_clock>; + status = "disabled"; + }; + gic: interrupt-controller@80600000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; @@ -287,5 +352,17 @@ #clock-cells = <0>; clock-frequency = <200000000>; }; + + nand_clock: nand-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; + + emmc_clock: emmc-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; }; }; |