diff options
Diffstat (limited to 'dts/src/arm64/marvell/armada-7040-db.dts')
| -rw-r--r-- | dts/src/arm64/marvell/armada-7040-db.dts | 52 |
1 files changed, 29 insertions, 23 deletions
diff --git a/dts/src/arm64/marvell/armada-7040-db.dts b/dts/src/arm64/marvell/armada-7040-db.dts index 52b5341cb2..3ae05eee2c 100644 --- a/dts/src/arm64/marvell/armada-7040-db.dts +++ b/dts/src/arm64/marvell/armada-7040-db.dts @@ -61,7 +61,13 @@ reg = <0x0 0x0 0x0 0x80000000>; }; - cpm_reg_usb3_0_vbus: cpm-usb3-0-vbus { + aliases { + ethernet0 = &cp0_eth0; + ethernet1 = &cp0_eth1; + ethernet2 = &cp0_eth2; + }; + + cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus { compatible = "regulator-fixed"; regulator-name = "usb3h0-vbus"; regulator-min-microvolt = <5000000>; @@ -70,7 +76,7 @@ gpio = <&expander0 0 GPIO_ACTIVE_HIGH>; }; - cpm_reg_usb3_1_vbus: cpm-usb3-1-vbus { + cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus { compatible = "regulator-fixed"; regulator-name = "usb3h1-vbus"; regulator-min-microvolt = <5000000>; @@ -79,14 +85,14 @@ gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; }; - cpm_usb3_0_phy: cpm-usb3-0-phy { + cp0_usb3_0_phy: cp0-usb3-0-phy { compatible = "usb-nop-xceiv"; - vcc-supply = <&cpm_reg_usb3_0_vbus>; + vcc-supply = <&cp0_reg_usb3_0_vbus>; }; - cpm_usb3_1_phy: cpm-usb3-1-phy { + cp0_usb3_1_phy: cp0-usb3-1-phy { compatible = "usb-nop-xceiv"; - vcc-supply = <&cpm_reg_usb3_1_vbus>; + vcc-supply = <&cp0_reg_usb3_1_vbus>; }; }; @@ -129,11 +135,11 @@ }; -&cpm_pcie2 { +&cp0_pcie2 { status = "okay"; }; -&cpm_i2c0 { +&cp0_i2c0 { status = "okay"; clock-frequency = <100000>; @@ -156,7 +162,7 @@ }; }; -&cpm_nand { +&cp0_nand { /* * SPI on CPM and NAND have common pins on this board. We can * use only one at a time. To enable the NAND (whihch will @@ -186,7 +192,7 @@ }; -&cpm_spi1 { +&cp0_spi1 { status = "okay"; spi-flash@0 { @@ -214,17 +220,17 @@ }; }; -&cpm_sata0 { +&cp0_sata0 { status = "okay"; }; -&cpm_usb3_0 { - usb-phy = <&cpm_usb3_0_phy>; +&cp0_usb3_0 { + usb-phy = <&cp0_usb3_0_phy>; status = "okay"; }; -&cpm_usb3_1 { - usb-phy = <&cpm_usb3_1_phy>; +&cp0_usb3_1 { + usb-phy = <&cp0_usb3_1_phy>; status = "okay"; }; @@ -235,14 +241,14 @@ non-removable; }; -&cpm_sdhci0 { +&cp0_sdhci0 { status = "okay"; bus-width = <4>; no-1-8-v; cd-gpios = <&expander0 12 GPIO_ACTIVE_LOW>; }; -&cpm_mdio { +&cp0_mdio { status = "okay"; phy0: ethernet-phy@0 { @@ -253,28 +259,28 @@ }; }; -&cpm_ethernet { +&cp0_ethernet { status = "okay"; }; -&cpm_eth0 { +&cp0_eth0 { status = "okay"; /* Network PHY */ phy-mode = "10gbase-kr"; /* Generic PHY, providing serdes lanes */ - phys = <&cpm_comphy2 0>; + phys = <&cp0_comphy2 0>; }; -&cpm_eth1 { +&cp0_eth1 { status = "okay"; /* Network PHY */ phy = <&phy0>; phy-mode = "sgmii"; /* Generic PHY, providing serdes lanes */ - phys = <&cpm_comphy0 1>; + phys = <&cp0_comphy0 1>; }; -&cpm_eth2 { +&cp0_eth2 { status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; |