diff options
Diffstat (limited to 'dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts')
| -rw-r--r-- | dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts | 169 |
1 files changed, 147 insertions, 22 deletions
diff --git a/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts b/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts index a211a046b2..67892f0d28 100644 --- a/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts +++ b/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts @@ -20,7 +20,7 @@ stdout-path = "serial0:115200n8"; }; - memory@00000000 { + memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; @@ -31,6 +31,16 @@ ethernet2 = &cp1_eth2; }; + fan: pwm { + compatible = "pwm-fan"; + /* 20% steps */ + cooling-levels = <0 51 102 153 204 255>; + #cooling-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_fan_pwm_pins>; + pwms = <&cp0_gpio2 16 40000>; + }; + v_3_3: regulator-3-3v { compatible = "regulator-fixed"; regulator-name = "v_3_3"; @@ -54,8 +64,8 @@ sfp_cp0_eth0: sfp-cp0-eth0 { compatible = "sff,sfp"; i2c-bus = <&cp0_i2c1>; - mod-def0-gpio = <&cp0_gpio2 17 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&cp0_gpio2 17 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cp0_sfp_present_pins &cp1_sfp_tx_disable_pins>; maximum-power-milliwatt = <2000>; @@ -84,7 +94,7 @@ pinctrl-0 = <&cp0_gpio_reset_pins &cp1_wps_button_pins>; pinctrl-names = "default"; - button_0 { + button-0 { /* The rear button */ label = "Rear Button"; gpios = <&cp0_gpio2 7 GPIO_ACTIVE_LOW>; @@ -92,7 +102,7 @@ linux,code = <BTN_0>; }; - button_1 { + button-1 { /* The wps button */ label = "WPS Button"; gpios = <&cp1_gpio1 30 GPIO_ACTIVE_LOW>; @@ -102,6 +112,123 @@ }; }; +&ap_thermal_ic { + polling-delay = <1000>; /* milliseconds */ + trips { + ap_active: trip-active { + temperature = <40000>; /* millicelsius */ + hysteresis = <4000>; /* millicelsius */ + type = "active"; + }; + }; + cooling-maps { + map0 { + trip = <&ap_active>; + cooling-device = <&fan THERMAL_NO_LIMIT 4>; + }; + map1 { + trip = <&ap_crit>; + cooling-device = <&fan 4 5>; + }; + }; +}; + +&cp0_thermal_ic { + polling-delay = <1000>; /* milliseconds */ + trips { + cp0_active0: trip-active0 { + temperature = <40000>; /* millicelsius */ + hysteresis = <2500>; /* millicelsius */ + type = "active"; + }; + cp0_active1: trip-active1 { + temperature = <45000>; /* millicelsius */ + hysteresis = <2500>; /* millicelsius */ + type = "active"; + }; + cp0_active2: trip-active2 { + temperature = <50000>; /* millicelsius */ + hysteresis = <2500>; /* millicelsius */ + type = "active"; + }; + cp0_active3: trip-active3 { + temperature = <60000>; /* millicelsius */ + hysteresis = <2500>; /* millicelsius */ + type = "active"; + }; + }; + cooling-maps { + map0 { + trip = <&cp0_active0>; + cooling-device = <&fan 0 1>; + }; + map1 { + trip = <&cp0_active1>; + cooling-device = <&fan 1 2>; + }; + map2 { + trip = <&cp0_active2>; + cooling-device = <&fan 2 3>; + }; + map3 { + trip = <&cp0_active3>; + cooling-device = <&fan 3 4>; + }; + map4 { + trip = <&cp0_crit>; + cooling-device = <&fan 4 5>; + }; + }; +}; + +&cp1_thermal_ic { + polling-delay = <1000>; /* milliseconds */ + trips { + cp1_active0: trip-active0 { + temperature = <40000>; /* millicelsius */ + hysteresis = <2500>; /* millicelsius */ + type = "active"; + }; + cp1_active1: trip-active1 { + temperature = <45000>; /* millicelsius */ + hysteresis = <2500>; /* millicelsius */ + type = "active"; + }; + cp1_active2: trip-active2 { + temperature = <50000>; /* millicelsius */ + hysteresis = <2500>; /* millicelsius */ + type = "active"; + }; + cp1_active3: trip-active3 { + temperature = <60000>; /* millicelsius */ + hysteresis = <2500>; /* millicelsius */ + type = "active"; + }; + }; + cooling-maps { + map0 { + trip = <&cp1_active0>; + cooling-device = <&fan 0 1>; + }; + map1 { + trip = <&cp1_active1>; + cooling-device = <&fan 1 2>; + }; + map2 { + trip = <&cp1_active2>; + cooling-device = <&fan 2 3>; + }; + map3 { + trip = <&cp1_active3>; + cooling-device = <&fan 3 4>; + }; + map4 { + trip = <&cp1_crit>; + cooling-device = <&fan 4 5>; + }; + }; +}; + &uart0 { status = "okay"; pinctrl-0 = <&uart0_pins>; @@ -276,7 +403,7 @@ /* SFP */ &cp0_eth0 { status = "okay"; - phy-mode = "10gbase-kr"; + phy-mode = "10gbase-r"; managed = "in-band-status"; phys = <&cp0_comphy2 0>; sfp = <&sfp_cp0_eth0>; @@ -367,44 +494,45 @@ pinctrl-0 = <&cp0_copper_eth_phy_reset>; reset-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>; reset-assert-us = <10000>; + reset-deassert-us = <10000>; }; - switch0: switch0@4 { + switch0: ethernet-switch@4 { compatible = "marvell,mv88e6085"; reg = <4>; pinctrl-names = "default"; pinctrl-0 = <&cp1_switch_reset_pins>; reset-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_LOW>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <1>; label = "lan2"; phy-handle = <&switch0phy0>; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan1"; phy-handle = <&switch0phy1>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan4"; phy-handle = <&switch0phy2>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "lan3"; phy-handle = <&switch0phy3>; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "cpu"; ethernet = <&cp1_eth2>; @@ -417,19 +545,19 @@ #address-cells = <1>; #size-cells = <0>; - switch0phy0: switch0phy0@11 { + switch0phy0: ethernet-phy@11 { reg = <0x11>; }; - switch0phy1: switch0phy1@12 { + switch0phy1: ethernet-phy@12 { reg = <0x12>; }; - switch0phy2: switch0phy2@13 { + switch0phy2: ethernet-phy@13 { reg = <0x13>; }; - switch0phy3: switch0phy3@14 { + switch0phy3: ethernet-phy@14 { reg = <0x14>; }; }; @@ -453,10 +581,7 @@ status = "okay"; phy-mode = "2500base-x"; phys = <&cp1_comphy5 2>; - fixed-link { - speed = <2500>; - full-duplex; - }; + managed = "in-band-status"; }; &cp1_spi1 { @@ -464,7 +589,7 @@ pinctrl-0 = <&cp1_spi1_pins>; status = "okay"; - spi-flash@0 { + flash@0 { compatible = "st,w25q32"; spi-max-frequency = <50000000>; reg = <0>; |