diff options
Diffstat (limited to 'dts/src/arm64/marvell/armada-8040-mcbin.dtsi')
-rw-r--r-- | dts/src/arm64/marvell/armada-8040-mcbin.dtsi | 50 |
1 files changed, 34 insertions, 16 deletions
diff --git a/dts/src/arm64/marvell/armada-8040-mcbin.dtsi b/dts/src/arm64/marvell/armada-8040-mcbin.dtsi index 572e2610e0..c864df9ec8 100644 --- a/dts/src/arm64/marvell/armada-8040-mcbin.dtsi +++ b/dts/src/arm64/marvell/armada-8040-mcbin.dtsi @@ -65,36 +65,39 @@ /* CON15,16 - CPM lane 4 */ compatible = "sff,sfp"; i2c-bus = <&sfpp0_i2c>; - los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>; + los-gpios = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cp1_sfpp0_pins>; + maximum-power-milliwatt = <2000>; }; sfp_eth1: sfp-eth1 { /* CON17,18 - CPS lane 4 */ compatible = "sff,sfp"; i2c-bus = <&sfpp1_i2c>; - los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>; + los-gpios = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>; + maximum-power-milliwatt = <2000>; }; sfp_eth3: sfp-eth3 { /* CON13,14 - CPS lane 5 */ compatible = "sff,sfp"; i2c-bus = <&sfp_1g_i2c>; - los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>; + los-gpios = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>; + maximum-power-milliwatt = <2000>; }; }; @@ -132,7 +135,7 @@ pinctrl-0 = <&cp0_i2c1_pins>; status = "okay"; - i2c-switch@70 { + i2c-mux@70 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; @@ -256,13 +259,23 @@ vqmmc-supply = <&v_3_3>; }; +&cp0_utmi { + status = "okay"; +}; + &cp0_usb3_0 { /* J38? - USB2.0 only */ + phys = <&cp0_utmi0>; + phy-names = "utmi"; + dr_mode = "host"; status = "okay"; }; &cp0_usb3_1 { /* J38? - USB2.0 only */ + phys = <&cp0_utmi1>; + phy-names = "utmi"; + dr_mode = "host"; status = "okay"; }; @@ -347,7 +360,7 @@ pinctrl-0 = <&cp1_spi1_pins>; status = "okay"; - spi-flash@0 { + flash@0 { compatible = "st,w25q32"; spi-max-frequency = <50000000>; reg = <0>; @@ -361,9 +374,14 @@ }; }; +&cp1_utmi { + status = "okay"; +}; + &cp1_usb3_0 { /* CPS Lane 2 - CON7 */ - phys = <&cp1_comphy2 0>; - phy-names = "cp1-usb3h0-comphy"; + phys = <&cp1_comphy2 0>, <&cp1_utmi0>; + phy-names = "cp1-usb3h0-comphy", "utmi"; + dr_mode = "host"; status = "okay"; }; |