summaryrefslogtreecommitdiffstats
path: root/dts/src/arm64/marvell
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm64/marvell')
-rw-r--r--dts/src/arm64/marvell/armada-3720-espressobin.dts22
-rw-r--r--dts/src/arm64/marvell/armada-37xx.dtsi10
-rw-r--r--dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts22
-rw-r--r--dts/src/arm64/marvell/armada-8040-mcbin-singleshot.dts29
-rw-r--r--dts/src/arm64/marvell/armada-8040-mcbin.dts333
-rw-r--r--dts/src/arm64/marvell/armada-8040-mcbin.dtsi346
6 files changed, 432 insertions, 330 deletions
diff --git a/dts/src/arm64/marvell/armada-3720-espressobin.dts b/dts/src/arm64/marvell/armada-3720-espressobin.dts
index 3ab25ad402..846003bb48 100644
--- a/dts/src/arm64/marvell/armada-3720-espressobin.dts
+++ b/dts/src/arm64/marvell/armada-3720-espressobin.dts
@@ -60,9 +60,31 @@
cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>;
marvell,pad-type = "sd";
vqmmc-supply = <&vcc_sd_reg1>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio_pins>;
status = "okay";
};
+/* U11 */
+&sdhci0 {
+ non-removable;
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+ marvell,xenon-emmc;
+ marvell,xenon-tun-count = <9>;
+ marvell,pad-type = "fixed-1-8v";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc_pins>;
+/*
+ * This eMMC is not populated on all boards, so disable it by
+ * default and let the bootloader enable it, if it is present
+ */
+ status = "disabled";
+};
+
&spi0 {
status = "okay";
diff --git a/dts/src/arm64/marvell/armada-37xx.dtsi b/dts/src/arm64/marvell/armada-37xx.dtsi
index 4472bcd8f9..e05594ea15 100644
--- a/dts/src/arm64/marvell/armada-37xx.dtsi
+++ b/dts/src/arm64/marvell/armada-37xx.dtsi
@@ -234,6 +234,11 @@
groups = "uart2";
function = "uart";
};
+
+ mmc_pins: mmc-pins {
+ groups = "emmc_nb";
+ function = "emmc";
+ };
};
nb_pm: syscon@14000 {
@@ -266,6 +271,11 @@
function = "mii";
};
+ sdio_pins: sdio-pins {
+ groups = "sdio_sb";
+ function = "sdio";
+ };
+
};
eth0: ethernet@30000 {
diff --git a/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts b/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts
index 9473d40a29..5b4a9609e3 100644
--- a/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts
@@ -42,7 +42,7 @@
v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
compatible = "regulator-fixed";
- gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
+ gpio = <&cp0_gpio2 15 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&cp0_xhci_vbus_pins>;
regulator-name = "v_5v0_usb3_hst_vbus";
@@ -246,6 +246,18 @@
gpios = <1 GPIO_ACTIVE_HIGH>;
output-high;
};
+
+ lte_reset {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_LOW>;
+ output-low;
+ };
+
+ lte_disable {
+ gpio-hog;
+ gpios = <21 GPIO_ACTIVE_LOW>;
+ output-low;
+ };
};
&cp0_ethernet {
@@ -270,6 +282,10 @@
vqmmc-supply = <&v_3_3>;
};
+&cp0_usb3_1 {
+ status = "okay";
+};
+
&cp1_pinctrl {
/*
* MPP Bus:
@@ -333,6 +349,10 @@
*/
marvell,reg-init = <3 16 0 0x1017>;
reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_copper_eth_phy_reset>;
+ reset-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
};
switch0: switch0@4 {
diff --git a/dts/src/arm64/marvell/armada-8040-mcbin-singleshot.dts b/dts/src/arm64/marvell/armada-8040-mcbin-singleshot.dts
new file mode 100644
index 0000000000..c3e18fd5bc
--- /dev/null
+++ b/dts/src/arm64/marvell/armada-8040-mcbin-singleshot.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for MACCHIATOBin Armada 8040 community board platform
+ */
+
+#include "armada-8040-mcbin.dtsi"
+
+/ {
+ model = "Marvell 8040 MACCHIATOBin Single-shot";
+ compatible = "marvell,armada8040-mcbin-singleshot",
+ "marvell,armada8040-mcbin", "marvell,armada8040",
+ "marvell,armada-ap806-quad", "marvell,armada-ap806";
+};
+
+&cp0_eth0 {
+ status = "okay";
+ phy-mode = "10gbase-kr";
+ managed = "in-band-status";
+ sfp = <&sfp_eth0>;
+};
+
+&cp1_eth0 {
+ status = "okay";
+ phy-mode = "10gbase-kr";
+ managed = "in-band-status";
+ sfp = <&sfp_eth1>;
+};
diff --git a/dts/src/arm64/marvell/armada-8040-mcbin.dts b/dts/src/arm64/marvell/armada-8040-mcbin.dts
index 56fa448609..d06f5ab7dd 100644
--- a/dts/src/arm64/marvell/armada-8040-mcbin.dts
+++ b/dts/src/arm64/marvell/armada-8040-mcbin.dts
@@ -5,226 +5,13 @@
* Device Tree file for MACCHIATOBin Armada 8040 community board platform
*/
-#include "armada-8040.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
+#include "armada-8040-mcbin.dtsi"
/ {
- model = "Marvell 8040 MACCHIATOBin";
- compatible = "marvell,armada8040-mcbin", "marvell,armada8040",
+ model = "Marvell 8040 MACCHIATOBin Double-shot";
+ compatible = "marvell,armada8040-mcbin-doubleshot",
+ "marvell,armada8040-mcbin", "marvell,armada8040",
"marvell,armada-ap806-quad", "marvell,armada-ap806";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
- };
-
- aliases {
- ethernet0 = &cp0_eth0;
- ethernet1 = &cp1_eth0;
- ethernet2 = &cp1_eth1;
- ethernet3 = &cp1_eth2;
- };
-
- /* Regulator labels correspond with schematics */
- v_3_3: regulator-3-3v {
- compatible = "regulator-fixed";
- regulator-name = "v_3_3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- status = "okay";
- };
-
- v_vddo_h: regulator-1-8v {
- compatible = "regulator-fixed";
- regulator-name = "v_vddo_h";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- status = "okay";
- };
-
- v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_xhci_vbus_pins>;
- regulator-name = "v_5v0_usb3_hst_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- status = "okay";
- };
-
- usb3h0_phy: usb3_phy0 {
- compatible = "usb-nop-xceiv";
- vcc-supply = <&v_5v0_usb3_hst_vbus>;
- };
-
- sfp_eth0: sfp-eth0 {
- /* CON15,16 - CPM lane 4 */
- compatible = "sff,sfp";
- i2c-bus = <&sfpp0_i2c>;
- los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp1_sfpp0_pins>;
- };
-
- sfp_eth1: sfp-eth1 {
- /* CON17,18 - CPS lane 4 */
- compatible = "sff,sfp";
- i2c-bus = <&sfpp1_i2c>;
- los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
- };
-
- sfp_eth3: sfp-eth3 {
- /* CON13,14 - CPS lane 5 */
- compatible = "sff,sfp";
- i2c-bus = <&sfp_1g_i2c>;
- los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
- };
-};
-
-&uart0 {
- status = "okay";
- pinctrl-0 = <&uart0_pins>;
- pinctrl-names = "default";
-};
-
-&ap_sdhci0 {
- bus-width = <8>;
- /*
- * Not stable in HS modes - phy needs "more calibration", so add
- * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
- */
- marvell,xenon-phy-slow-mode;
- no-1-8-v;
- no-sd;
- no-sdio;
- non-removable;
- status = "okay";
- vqmmc-supply = <&v_vddo_h>;
-};
-
-&cp0_i2c0 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_i2c0_pins>;
- status = "okay";
-};
-
-&cp0_i2c1 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_i2c1_pins>;
- status = "okay";
-
- i2c-switch@70 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x70>;
-
- sfpp0_i2c: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
- sfpp1_i2c: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
- sfp_1g_i2c: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
- };
-};
-
-/* J25 UART header */
-&cp0_uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_uart1_pins>;
- status = "okay";
-};
-
-&cp0_mdio {
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_ge_mdio_pins>;
- status = "okay";
-
- ge_phy: ethernet-phy@0 {
- reg = <0>;
- };
-};
-
-&cp0_pcie0 {
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_pcie_pins>;
- num-lanes = <4>;
- num-viewport = <8>;
- reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>;
- status = "okay";
-};
-
-&cp0_pinctrl {
- cp0_ge_mdio_pins: ge-mdio-pins {
- marvell,pins = "mpp32", "mpp34";
- marvell,function = "ge";
- };
- cp0_i2c1_pins: i2c1-pins {
- marvell,pins = "mpp35", "mpp36";
- marvell,function = "i2c1";
- };
- cp0_i2c0_pins: i2c0-pins {
- marvell,pins = "mpp37", "mpp38";
- marvell,function = "i2c0";
- };
- cp0_uart1_pins: uart1-pins {
- marvell,pins = "mpp40", "mpp41";
- marvell,function = "uart1";
- };
- cp0_xhci_vbus_pins: xhci0-vbus-pins {
- marvell,pins = "mpp47";
- marvell,function = "gpio";
- };
- cp0_sfp_1g_pins: sfp-1g-pins {
- marvell,pins = "mpp51", "mpp53", "mpp54";
- marvell,function = "gpio";
- };
- cp0_pcie_pins: pcie-pins {
- marvell,pins = "mpp52";
- marvell,function = "gpio";
- };
- cp0_sdhci_pins: sdhci-pins {
- marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
- "mpp60", "mpp61";
- marvell,function = "sdio";
- };
- cp0_sfpp1_pins: sfpp1-pins {
- marvell,pins = "mpp62";
- marvell,function = "gpio";
- };
};
&cp0_xmdio {
@@ -243,46 +30,11 @@
};
};
-&cp0_ethernet {
- status = "okay";
-};
-
&cp0_eth0 {
status = "okay";
/* Network PHY */
phy = <&phy0>;
phy-mode = "10gbase-kr";
- /* Generic PHY, providing serdes lanes */
- phys = <&cp0_comphy4 0>;
-};
-
-&cp0_sata0 {
- /* CPM Lane 0 - U29 */
- status = "okay";
-};
-
-&cp0_sdhci0 {
- /* U6 */
- broken-cd;
- bus-width = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&cp0_sdhci_pins>;
- status = "okay";
- vqmmc-supply = <&v_3_3>;
-};
-
-&cp0_usb3_0 {
- /* J38? - USB2.0 only */
- status = "okay";
-};
-
-&cp0_usb3_1 {
- /* J38? - USB2.0 only */
- status = "okay";
-};
-
-&cp1_ethernet {
- status = "okay";
};
&cp1_eth0 {
@@ -290,81 +42,4 @@
/* Network PHY */
phy = <&phy8>;
phy-mode = "10gbase-kr";
- /* Generic PHY, providing serdes lanes */
- phys = <&cp1_comphy4 0>;
-};
-
-&cp1_eth1 {
- /* CPS Lane 0 - J5 (Gigabit RJ45) */
- status = "okay";
- /* Network PHY */
- phy = <&ge_phy>;
- phy-mode = "sgmii";
- /* Generic PHY, providing serdes lanes */
- phys = <&cp1_comphy0 1>;
-};
-
-&cp1_eth2 {
- /* CPS Lane 5 */
- status = "okay";
- /* Network PHY */
- phy-mode = "2500base-x";
- managed = "in-band-status";
- /* Generic PHY, providing serdes lanes */
- phys = <&cp1_comphy5 2>;
- sfp = <&sfp_eth3>;
-};
-
-&cp1_pinctrl {
- cp1_sfpp1_pins: sfpp1-pins {
- marvell,pins = "mpp8", "mpp10", "mpp11";
- marvell,function = "gpio";
- };
- cp1_spi1_pins: spi1-pins {
- marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
- marvell,function = "spi1";
- };
- cp1_uart0_pins: uart0-pins {
- marvell,pins = "mpp6", "mpp7";
- marvell,function = "uart0";
- };
- cp1_sfp_1g_pins: sfp-1g-pins {
- marvell,pins = "mpp24";
- marvell,function = "gpio";
- };
- cp1_sfpp0_pins: sfpp0-pins {
- marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29";
- marvell,function = "gpio";
- };
-};
-
-/* J27 UART header */
-&cp1_uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&cp1_uart0_pins>;
- status = "okay";
-};
-
-&cp1_sata0 {
- /* CPS Lane 1 - U32 */
- /* CPS Lane 3 - U31 */
- status = "okay";
-};
-
-&cp1_spi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&cp1_spi1_pins>;
- status = "okay";
-
- spi-flash@0 {
- compatible = "st,w25q32";
- spi-max-frequency = <50000000>;
- reg = <0>;
- };
-};
-
-&cp1_usb3_0 {
- /* CPS Lane 2 - CON7 */
- usb-phy = <&usb3h0_phy>;
- status = "okay";
};
diff --git a/dts/src/arm64/marvell/armada-8040-mcbin.dtsi b/dts/src/arm64/marvell/armada-8040-mcbin.dtsi
new file mode 100644
index 0000000000..29ea7e81ec
--- /dev/null
+++ b/dts/src/arm64/marvell/armada-8040-mcbin.dtsi
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for MACCHIATOBin Armada 8040 community board platform
+ */
+
+#include "armada-8040.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Marvell 8040 MACCHIATOBin";
+ compatible = "marvell,armada8040-mcbin", "marvell,armada8040",
+ "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ aliases {
+ ethernet0 = &cp0_eth0;
+ ethernet1 = &cp1_eth0;
+ ethernet2 = &cp1_eth1;
+ ethernet3 = &cp1_eth2;
+ };
+
+ /* Regulator labels correspond with schematics */
+ v_3_3: regulator-3-3v {
+ compatible = "regulator-fixed";
+ regulator-name = "v_3_3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ status = "okay";
+ };
+
+ v_vddo_h: regulator-1-8v {
+ compatible = "regulator-fixed";
+ regulator-name = "v_vddo_h";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ status = "okay";
+ };
+
+ v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_xhci_vbus_pins>;
+ regulator-name = "v_5v0_usb3_hst_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ status = "okay";
+ };
+
+ usb3h0_phy: usb3_phy0 {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&v_5v0_usb3_hst_vbus>;
+ };
+
+ sfp_eth0: sfp-eth0 {
+ /* CON15,16 - CPM lane 4 */
+ compatible = "sff,sfp";
+ i2c-bus = <&sfpp0_i2c>;
+ los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_sfpp0_pins>;
+ };
+
+ sfp_eth1: sfp-eth1 {
+ /* CON17,18 - CPS lane 4 */
+ compatible = "sff,sfp";
+ i2c-bus = <&sfpp1_i2c>;
+ los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
+ };
+
+ sfp_eth3: sfp-eth3 {
+ /* CON13,14 - CPS lane 5 */
+ compatible = "sff,sfp";
+ i2c-bus = <&sfp_1g_i2c>;
+ los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+};
+
+&ap_sdhci0 {
+ bus-width = <8>;
+ /*
+ * Not stable in HS modes - phy needs "more calibration", so add
+ * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
+ */
+ marvell,xenon-phy-slow-mode;
+ no-1-8-v;
+ no-sd;
+ no-sdio;
+ non-removable;
+ status = "okay";
+ vqmmc-supply = <&v_vddo_h>;
+};
+
+&cp0_i2c0 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c0_pins>;
+ status = "okay";
+};
+
+&cp0_i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c1_pins>;
+ status = "okay";
+
+ i2c-switch@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+
+ sfpp0_i2c: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ sfpp1_i2c: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ sfp_1g_i2c: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ };
+};
+
+/* J25 UART header */
+&cp0_uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_uart1_pins>;
+ status = "okay";
+};
+
+&cp0_mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_ge_mdio_pins>;
+ status = "okay";
+
+ ge_phy: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&cp0_pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_pcie_pins>;
+ num-lanes = <4>;
+ num-viewport = <8>;
+ reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&cp0_pinctrl {
+ cp0_ge_mdio_pins: ge-mdio-pins {
+ marvell,pins = "mpp32", "mpp34";
+ marvell,function = "ge";
+ };
+ cp0_i2c1_pins: i2c1-pins {
+ marvell,pins = "mpp35", "mpp36";
+ marvell,function = "i2c1";
+ };
+ cp0_i2c0_pins: i2c0-pins {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+ cp0_uart1_pins: uart1-pins {
+ marvell,pins = "mpp40", "mpp41";
+ marvell,function = "uart1";
+ };
+ cp0_xhci_vbus_pins: xhci0-vbus-pins {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+ cp0_sfp_1g_pins: sfp-1g-pins {
+ marvell,pins = "mpp51", "mpp53", "mpp54";
+ marvell,function = "gpio";
+ };
+ cp0_pcie_pins: pcie-pins {
+ marvell,pins = "mpp52";
+ marvell,function = "gpio";
+ };
+ cp0_sdhci_pins: sdhci-pins {
+ marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
+ "mpp60", "mpp61";
+ marvell,function = "sdio";
+ };
+ cp0_sfpp1_pins: sfpp1-pins {
+ marvell,pins = "mpp62";
+ marvell,function = "gpio";
+ };
+};
+
+&cp0_ethernet {
+ status = "okay";
+};
+
+&cp0_eth0 {
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp0_comphy4 0>;
+};
+
+&cp0_sata0 {
+ /* CPM Lane 0 - U29 */
+ status = "okay";
+};
+
+&cp0_sdhci0 {
+ /* U6 */
+ broken-cd;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_sdhci_pins>;
+ status = "okay";
+ vqmmc-supply = <&v_3_3>;
+};
+
+&cp0_usb3_0 {
+ /* J38? - USB2.0 only */
+ status = "okay";
+};
+
+&cp0_usb3_1 {
+ /* J38? - USB2.0 only */
+ status = "okay";
+};
+
+&cp1_ethernet {
+ status = "okay";
+};
+
+&cp1_eth0 {
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp1_comphy4 0>;
+};
+
+&cp1_eth1 {
+ /* CPS Lane 0 - J5 (Gigabit RJ45) */
+ status = "okay";
+ /* Network PHY */
+ phy = <&ge_phy>;
+ phy-mode = "sgmii";
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp1_comphy0 1>;
+};
+
+&cp1_eth2 {
+ /* CPS Lane 5 */
+ status = "okay";
+ /* Network PHY */
+ phy-mode = "2500base-x";
+ managed = "in-band-status";
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp1_comphy5 2>;
+ sfp = <&sfp_eth3>;
+};
+
+&cp1_pinctrl {
+ cp1_sfpp1_pins: sfpp1-pins {
+ marvell,pins = "mpp8", "mpp10", "mpp11";
+ marvell,function = "gpio";
+ };
+ cp1_spi1_pins: spi1-pins {
+ marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+ cp1_uart0_pins: uart0-pins {
+ marvell,pins = "mpp6", "mpp7";
+ marvell,function = "uart0";
+ };
+ cp1_sfp_1g_pins: sfp-1g-pins {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+ cp1_sfpp0_pins: sfpp0-pins {
+ marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29";
+ marvell,function = "gpio";
+ };
+};
+
+/* J27 UART header */
+&cp1_uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_uart0_pins>;
+ status = "okay";
+};
+
+&cp1_sata0 {
+ /* CPS Lane 1 - U32 */
+ /* CPS Lane 3 - U31 */
+ status = "okay";
+};
+
+&cp1_spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_spi1_pins>;
+ status = "okay";
+
+ spi-flash@0 {
+ compatible = "st,w25q32";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+};
+
+&cp1_usb3_0 {
+ /* CPS Lane 2 - CON7 */
+ usb-phy = <&usb3h0_phy>;
+ status = "okay";
+};
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-28 07:13:56 +0000