diff options
Diffstat (limited to 'dts/src/arm64/microchip/sparx5_pcb135_board.dtsi')
-rw-r--r-- | dts/src/arm64/microchip/sparx5_pcb135_board.dtsi | 64 |
1 files changed, 32 insertions, 32 deletions
diff --git a/dts/src/arm64/microchip/sparx5_pcb135_board.dtsi b/dts/src/arm64/microchip/sparx5_pcb135_board.dtsi index d10a9172b5..82ce007d99 100644 --- a/dts/src/arm64/microchip/sparx5_pcb135_board.dtsi +++ b/dts/src/arm64/microchip/sparx5_pcb135_board.dtsi @@ -59,28 +59,28 @@ }; &gpio { - i2cmux_pins_i: i2cmux-pins-i { + i2cmux_pins_i: i2cmux-pins { pins = "GPIO_35", "GPIO_36", "GPIO_50", "GPIO_51"; function = "twi_scl_m"; output-low; }; - i2cmux_s29: i2cmux-0 { + i2cmux_s29: i2cmux-0-pins { pins = "GPIO_35"; function = "twi_scl_m"; output-high; }; - i2cmux_s30: i2cmux-1 { + i2cmux_s30: i2cmux-1-pins { pins = "GPIO_36"; function = "twi_scl_m"; output-high; }; - i2cmux_s31: i2cmux-2 { + i2cmux_s31: i2cmux-2-pins { pins = "GPIO_50"; function = "twi_scl_m"; output-high; }; - i2cmux_s32: i2cmux-3 { + i2cmux_s32: i2cmux-3-pins { pins = "GPIO_51"; function = "twi_scl_m"; output-high; @@ -170,45 +170,45 @@ &axi { sfp_eth60: sfp-eth60 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp1>; - tx-disable-gpios = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp1>; + tx-disable-gpios = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>; rate-select0-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_HIGH>; - los-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>; }; sfp_eth61: sfp-eth61 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp2>; - tx-disable-gpios = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp2>; + tx-disable-gpios = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>; rate-select0-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_HIGH>; - los-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>; }; sfp_eth62: sfp-eth62 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp3>; - tx-disable-gpios = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp3>; + tx-disable-gpios = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>; rate-select0-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_HIGH>; - los-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>; }; sfp_eth63: sfp-eth63 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp4>; - tx-disable-gpios = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>; + compatible = "sff,sfp"; + i2c-bus = <&i2c_sfp4>; + tx-disable-gpios = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>; rate-select0-gpios = <&sgpio_out2 31 1 GPIO_ACTIVE_HIGH>; - los-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>; - tx-fault-gpios = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>; + los-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>; }; }; &mdio0 { - status = "ok"; + status = "okay"; phy0: ethernet-phy@0 { reg = <0>; }; @@ -284,7 +284,7 @@ }; &mdio1 { - status = "ok"; + status = "okay"; phy24: ethernet-phy@24 { reg = <0>; }; @@ -360,7 +360,7 @@ }; &mdio3 { - status = "ok"; + status = "okay"; phy64: ethernet-phy@64 { reg = <28>; }; |