diff options
Diffstat (limited to 'dts/src/arm64/qcom/apq8096-db820c.dts')
-rw-r--r-- | dts/src/arm64/qcom/apq8096-db820c.dts | 277 |
1 files changed, 132 insertions, 145 deletions
diff --git a/dts/src/arm64/qcom/apq8096-db820c.dts b/dts/src/arm64/qcom/apq8096-db820c.dts index c1cb1ba517..e8148b3d6c 100644 --- a/dts/src/arm64/qcom/apq8096-db820c.dts +++ b/dts/src/arm64/qcom/apq8096-db820c.dts @@ -14,6 +14,7 @@ #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> +#include <dt-bindings/sound/qcom,wcd9335.h> /* * GPIO name legend: proper name = the GPIO line is used as GPIO @@ -61,26 +62,23 @@ stdout-path = "serial0:115200n8"; }; - clocks { - compatible = "simple-bus"; - divclk4: divclk4 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "divclk4"; + div1_mclk: divclk1 { + compatible = "gpio-gate-clock"; + pinctrl-0 = <&audio_mclk>; + pinctrl-names = "default"; + clocks = <&rpmcc RPM_SMD_DIV_CLK1>; + #clock-cells = <0>; + enable-gpios = <&pm8994_gpios 15 0>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&divclk4_pin_a>; - }; + divclk4: divclk4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "divclk4"; - div1_mclk: divclk1 { - compatible = "gpio-gate-clock"; - pinctrl-0 = <&audio_mclk>; - pinctrl-names = "default"; - clocks = <&rpmcc RPM_SMD_DIV_CLK1>; - #clock-cells = <0>; - enable-gpios = <&pm8994_gpios 15 0>; - }; + pinctrl-names = "default"; + pinctrl-0 = <&divclk4_pin_a>; }; gpio-keys { @@ -99,14 +97,14 @@ usb2_id: usb2-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; + id-gpios = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb2_vbus_det_gpio>; }; usb3_id: usb3-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>; + id-gpios = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb3_vbus_det_gpio>; }; @@ -138,14 +136,12 @@ }; &blsp1_i2c3 { - /* On Low speed expansion */ - label = "LS-I2C0"; + /* On Low speed expansion: LS-I2C0 */ status = "okay"; }; &blsp1_spi1 { /* On Low speed expansion */ - label = "LS-SPI0"; status = "okay"; }; @@ -169,20 +165,17 @@ }; &blsp2_i2c1 { - /* On High speed expansion */ - label = "HS-I2C2"; + /* On High speed expansion: HS-I2C2 */ status = "okay"; }; &blsp2_i2c1 { - /* On Low speed expansion */ - label = "LS-I2C1"; + /* On Low speed expansion: LS-I2C1 */ status = "okay"; }; &blsp2_spi6 { /* On High speed expansion */ - label = "HS-SPI1"; status = "okay"; }; @@ -210,25 +203,6 @@ status = "okay"; }; -&hdmi { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; - pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; - - core-vdda-supply = <&vreg_l12a_1p8>; - core-vcc-supply = <&vreg_s4a_1p8>; -}; - -&hdmi_phy { - status = "okay"; - - vddio-supply = <&vreg_l12a_1p8>; - vcca-supply = <&vreg_l28a_0p925>; - #phy-cells = <0>; -}; - &hsusb_phy1 { status = "okay"; @@ -253,6 +227,25 @@ status = "okay"; }; +&mdss_hdmi { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; + pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; + + core-vdda-supply = <&vreg_l12a_1p8>; + core-vcc-supply = <&vreg_s4a_1p8>; +}; + +&mdss_hdmi_phy { + status = "okay"; + + vddio-supply = <&vreg_l12a_1p8>; + vcca-supply = <&vreg_l28a_0p925>; + #phy-cells = <0>; +}; + &mmcc { vdd-gfx-supply = <&vdd_gfx>; }; @@ -421,101 +414,65 @@ "NC", /* GPIO_148 */ "NC"; /* GPIO_149 */ - sdc2_cd_on: sdc2_cd_on { - mux { - pins = "gpio38"; - function = "gpio"; - }; - - config { - pins = "gpio38"; - bias-pull-up; /* pull up */ - drive-strength = <16>; /* 16 MA */ - }; + sdc2_cd_on: sdc2-cd-on-state { + pins = "gpio38"; + function = "gpio"; + bias-pull-up; + drive-strength = <16>; }; - sdc2_cd_off: sdc2_cd_off { - mux { - pins = "gpio38"; - function = "gpio"; - }; - - config { - pins = "gpio38"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 MA */ - }; + sdc2_cd_off: sdc2-cd-off-state { + pins = "gpio38"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; }; - hdmi_hpd_active: hdmi_hpd_active { - mux { - pins = "gpio34"; - function = "hdmi_hot"; - }; - - config { - pins = "gpio34"; - bias-pull-down; - drive-strength = <16>; - }; + hdmi_hpd_active: hdmi-hpd-active-state { + pins = "gpio34"; + function = "hdmi_hot"; + bias-pull-down; + drive-strength = <16>; }; - hdmi_hpd_suspend: hdmi_hpd_suspend { - mux { - pins = "gpio34"; - function = "hdmi_hot"; - }; - - config { - pins = "gpio34"; - bias-pull-down; - drive-strength = <2>; - }; + hdmi_hpd_suspend: hdmi-hpd-suspend-state { + pins = "gpio34"; + function = "hdmi_hot"; + bias-pull-down; + drive-strength = <2>; }; - hdmi_ddc_active: hdmi_ddc_active { - mux { - pins = "gpio32", "gpio33"; - function = "hdmi_ddc"; - }; - - config { - pins = "gpio32", "gpio33"; - drive-strength = <2>; - bias-pull-up; - }; + hdmi_ddc_active: hdmi-ddc-active-state { + pins = "gpio32", "gpio33"; + function = "hdmi_ddc"; + drive-strength = <2>; + bias-pull-up; }; - hdmi_ddc_suspend: hdmi_ddc_suspend { - mux { - pins = "gpio32", "gpio33"; - function = "hdmi_ddc"; - }; - - config { - pins = "gpio32", "gpio33"; - drive-strength = <2>; - bias-pull-down; - }; + hdmi_ddc_suspend: hdmi-ddc-suspend-state { + pins = "gpio32", "gpio33"; + function = "hdmi_ddc"; + drive-strength = <2>; + bias-pull-down; }; }; &pcie0 { status = "okay"; - perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; vddpe-3v3-supply = <&wlan_en>; vdda-supply = <&vreg_l28a_0p925>; }; &pcie1 { status = "okay"; - perst-gpio = <&tlmm 130 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>; vdda-supply = <&vreg_l28a_0p925>; }; &pcie2 { status = "okay"; - perst-gpio = <&tlmm 114 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 114 GPIO_ACTIVE_LOW>; vdda-supply = <&vreg_l28a_0p925>; }; @@ -559,7 +516,7 @@ pins = "gpio5"; function = PMIC_GPIO_FUNC_NORMAL; output-low; - power-source = <2>; // PM8994_GPIO_S4, 1.8V + power-source = <PM8994_GPIO_S4>; /* 1.8V */ }; }; @@ -568,7 +525,7 @@ pins = "gpio19"; function = PMIC_GPIO_FUNC_NORMAL; output-low; - power-source = <PM8994_GPIO_S4>; // 1.8V + power-source = <PM8994_GPIO_S4>; /* 1.8V */ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; bias-pull-down; }; @@ -579,7 +536,7 @@ pins = "gpio8"; function = PMIC_GPIO_FUNC_NORMAL; output-low; - power-source = <PM8994_GPIO_S4>; // 1.8V + power-source = <PM8994_GPIO_S4>; /* 1.8V */ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; bias-pull-down; }; @@ -589,7 +546,7 @@ pinconf { pins = "gpio15"; function = "func1"; - power-source = <PM8994_GPIO_S4>; // 1.8V + power-source = <PM8994_GPIO_S4>; /* 1.8V */ }; }; @@ -601,7 +558,7 @@ drive-push-pull; bias-pull-up; qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; // 1.8V + power-source = <PM8994_GPIO_S4>; /* 1.8V */ }; }; @@ -622,7 +579,7 @@ input-enable; bias-pull-down; qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; // 1.8V + power-source = <PM8994_GPIO_S4>; /* 1.8V */ }; }; }; @@ -678,7 +635,7 @@ input-enable; bias-pull-down; qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; // 1.8V + power-source = <PM8994_GPIO_S4>; /* 1.8V */ }; }; }; @@ -741,8 +698,7 @@ &pmi8994_spmi_regulators { vdd_s2-supply = <&vph_pwr>; - vdd_gfx: s2@1700 { - reg = <0x1700 0x100>; + vdd_gfx: s2 { regulator-name = "VDD_GFX"; regulator-min-microvolt = <980000>; regulator-max-microvolt = <980000>; @@ -750,7 +706,7 @@ }; &rpm_requests { - pm8994-regulators { + regulators-0 { compatible = "qcom,rpm-pm8994-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -962,7 +918,7 @@ }; }; - pmi8994-regulators { + regulators-1 { compatible = "qcom,rpm-pmi8994-regulators"; vdd_s1-supply = <&vph_pwr>; @@ -1009,6 +965,50 @@ }; }; +&slim_msm { + status = "okay"; + + slim@1 { + reg = <1>; + #address-cells = <2>; + #size-cells = <0>; + + tasha_ifd: tas-ifd@0,0 { + compatible = "slim217,1a0"; + reg = <0 0>; + }; + + wcd9335: codec@1,0 { + compatible = "slim217,1a0"; + reg = <1 0>; + + clock-names = "mclk", "slimbus"; + clocks = <&div1_mclk>, + <&rpmcc RPM_SMD_BB_CLK1>; + interrupt-parent = <&tlmm>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, + <53 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "intr1", "intr2"; + interrupt-controller; + #interrupt-cells = <1>; + + pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; + pinctrl-names = "default"; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + slim-ifc-dev = <&tasha_ifd>; + + #sound-dai-cells = <1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + }; + }; +}; + &sound { compatible = "qcom,apq8096-sndcard"; model = "DB820c"; @@ -1049,7 +1049,7 @@ }; codec { - sound-dai = <&hdmi 0>; + sound-dai = <&mdss_hdmi 0>; }; }; @@ -1061,10 +1061,10 @@ platform { sound-dai = <&q6routing>; - }; + }; codec { - sound-dai = <&wcd9335 6>; + sound-dai = <&wcd9335 AIF4_PB>; }; }; @@ -1079,7 +1079,7 @@ }; codec { - sound-dai = <&wcd9335 1>; + sound-dai = <&wcd9335 AIF1_CAP>; }; }; }; @@ -1089,7 +1089,6 @@ vdda-phy-supply = <&vreg_l28a_0p925>; vdda-pll-supply = <&vreg_l12a_1p8>; - vddp-ref-clk-supply = <&vreg_l25a_1p2>; }; &ufshc { @@ -1098,6 +1097,7 @@ vcc-supply = <&vreg_l20a_2p95>; vccq-supply = <&vreg_l25a_1p2>; vccq2-supply = <&vreg_s4a_1p8>; + vdd-hba-supply = <&vreg_l25a_1p2>; vcc-max-microamp = <600000>; vccq-max-microamp = <450000>; @@ -1130,21 +1130,8 @@ vdda-phy-supply = <&vreg_l28a_0p925>; vdda-pll-supply = <&vreg_l12a_1p8>; - }; &venus { status = "okay"; }; - -&wcd9335 { - clock-names = "mclk", "slimbus"; - clocks = <&div1_mclk>, - <&rpmcc RPM_SMD_BB_CLK1>; - - vdd-buck-supply = <&vreg_s4a_1p8>; - vdd-buck-sido-supply = <&vreg_s4a_1p8>; - vdd-tx-supply = <&vreg_s4a_1p8>; - vdd-rx-supply = <&vreg_s4a_1p8>; - vdd-io-supply = <&vreg_s4a_1p8>; -}; |