summaryrefslogtreecommitdiffstats
path: root/dts/src/arm64/qcom/apq8096-db820c.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm64/qcom/apq8096-db820c.dtsi')
-rw-r--r--dts/src/arm64/qcom/apq8096-db820c.dtsi1102
1 files changed, 0 insertions, 1102 deletions
diff --git a/dts/src/arm64/qcom/apq8096-db820c.dtsi b/dts/src/arm64/qcom/apq8096-db820c.dtsi
deleted file mode 100644
index defcbd15ed..0000000000
--- a/dts/src/arm64/qcom/apq8096-db820c.dtsi
+++ /dev/null
@@ -1,1102 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved.
- */
-
-#include "msm8996.dtsi"
-#include "pm8994.dtsi"
-#include "pmi8994.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/sound/qcom,q6afe.h>
-#include <dt-bindings/sound/qcom,q6asm.h>
-
-/*
- * GPIO name legend: proper name = the GPIO line is used as GPIO
- * NC = not connected (pin out but not routed from the chip to
- * anything the board)
- * "[PER]" = pin is muxed for [peripheral] (not GPIO)
- * LSEC = Low Speed External Connector
- * P HSEC = Primary High Speed External Connector
- * S HSEC = Secondary High Speed External Connector
- * J14 = Camera Connector
- * TP = Test Points
- *
- * Line names are taken from the schematic "DragonBoard 820c",
- * drawing no: LM25-P2751-1
- *
- * For the lines routed to the external connectors the
- * lines are named after the 96Boards CE Specification 1.0,
- * Appendix "Expansion Connector Signal Description".
- *
- * When the 96Board naming of a line and the schematic name of
- * the same line are in conflict, the 96Board specification
- * takes precedence, which means that the external UART on the
- * LSEC is named UART0 while the schematic and SoC names this
- * UART3. This is only for the informational lines i.e. "[FOO]",
- * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
- * ones actually used for GPIO.
- */
-
-/ {
- aliases {
- serial0 = &blsp2_uart1;
- serial1 = &blsp2_uart2;
- serial2 = &blsp1_uart1;
- i2c0 = &blsp1_i2c2;
- i2c1 = &blsp2_i2c1;
- i2c2 = &blsp2_i2c0;
- spi0 = &blsp1_spi0;
- spi1 = &blsp2_spi5;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- clocks {
- compatible = "simple-bus";
- divclk4: divclk4 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "divclk4";
-
- pinctrl-names = "default";
- pinctrl-0 = <&divclk4_pin_a>;
- };
-
- div1_mclk: divclk1 {
- compatible = "gpio-gate-clock";
- pinctrl-0 = <&audio_mclk>;
- pinctrl-names = "default";
- clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
- #clock-cells = <0>;
- enable-gpios = <&pm8994_gpios 15 0>;
- };
- };
-
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- autorepeat;
-
- pinctrl-names = "default";
- pinctrl-0 = <&volume_up_gpio>;
-
- button@0 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
- };
- };
-
- usb2_id: usb2-id {
- compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&usb2_vbus_det_gpio>;
- };
-
- usb3_id: usb3-id {
- compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&usb3_vbus_det_gpio>;
- };
-
- vph_pwr: vph-pwr-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vph_pwr";
- regulator-always-on;
- regulator-boot-on;
-
- regulator-min-microvolt = <3700000>;
- regulator-max-microvolt = <3700000>;
- };
-
- wlan_en: wlan-en-1-8v {
- pinctrl-names = "default";
- pinctrl-0 = <&wlan_en_gpios>;
- compatible = "regulator-fixed";
- regulator-name = "wlan-en-regulator";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- gpio = <&pm8994_gpios 8 0>;
-
- /* WLAN card specific delay */
- startup-delay-us = <70000>;
- enable-active-high;
- };
-};
-
-&blsp1_i2c2 {
- /* On Low speed expansion */
- label = "LS-I2C0";
- status = "okay";
-};
-
-&blsp1_spi0 {
- /* On Low speed expansion */
- label = "LS-SPI0";
- status = "okay";
-};
-
-&blsp1_uart1 {
- label = "BT-UART";
- status = "okay";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_uart1_default>;
- pinctrl-1 = <&blsp1_uart1_sleep>;
-
- bluetooth {
- compatible = "qcom,qca6174-bt";
-
- /* bt_disable_n gpio */
- enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
-
- clocks = <&divclk4>;
- };
-};
-
-&blsp2_i2c0 {
- /* On High speed expansion */
- label = "HS-I2C2";
- status = "okay";
-};
-
-&blsp2_i2c1 {
- /* On Low speed expansion */
- label = "LS-I2C1";
- status = "okay";
-};
-
-&blsp2_spi5 {
- /* On High speed expansion */
- label = "HS-SPI1";
- status = "okay";
-};
-
-&blsp2_uart1 {
- label = "LS-UART1";
- status = "okay";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_uart1_2pins_default>;
- pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
-};
-
-&blsp2_uart2 {
- label = "LS-UART0";
- status = "disabled";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_uart2_4pins_default>;
- pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
-};
-
-&camss {
- vdda-supply = <&vreg_l2a_1p25>;
-};
-
-&hdmi {
- status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
- pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
-
- core-vdda-supply = <&vreg_l12a_1p8>;
- core-vcc-supply = <&vreg_s4a_1p8>;
-};
-
-&hdmi_phy {
- status = "okay";
-
- vddio-supply = <&vreg_l12a_1p8>;
- vcca-supply = <&vreg_l28a_0p925>;
- #phy-cells = <0>;
-};
-
-&hsusb_phy1 {
- status = "okay";
-
- vdda-pll-supply = <&vreg_l12a_1p8>;
- vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
-};
-
-&hsusb_phy2 {
- status = "okay";
-
- vdda-pll-supply = <&vreg_l12a_1p8>;
- vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
-};
-
-&mdp {
- status = "okay";
-};
-
-&mdss {
- status = "okay";
-};
-
-&mmcc {
- vdd-gfx-supply = <&vdd_gfx>;
-};
-
-&msmgpio {
- gpio-line-names =
- "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
- "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
- "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */
- "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */
- "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */
- "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */
- "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */
- "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */
- "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */
- "TP93", /* GPIO_9 */
- "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */
- "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */
- "NC", /* GPIO_12 */
- "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */
- "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */
- "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */
- "TP99", /* GPIO_16 */
- "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */
- "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */
- "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */
- "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */
- "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */
- "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */
- "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */
- "GPIO-D", /* GPIO_24, LSEC pin 26 */
- "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */
- "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */
- "BLSP6_I2C_SDA", /* GPIO_27 */
- "BLSP6_I2C_SCL", /* GPIO_28 */
- "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */
- "GPIO30", /* GPIO_30, S HSEC pin 4 */
- "HDMI_CEC", /* GPIO_31 */
- "HDMI_DDC_CLOCK", /* GPIO_32 */
- "HDMI_DDC_DATA", /* GPIO_33 */
- "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */
- "PCIE0_RST_N", /* GPIO_35 */
- "PCIE0_CLKREQ_N", /* GPIO_36 */
- "PCIE0_WAKE", /* GPIO_37 */
- "SD_CARD_DET_N", /* GPIO_38 */
- "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */
- "W_DISABLE_N", /* GPIO_40 */
- "[BLSP9_UART_TX]", /* GPIO_41 */
- "[BLSP9_UART_RX]", /* GPIO_42 */
- "[BLSP2_UART_CTS_N]", /* GPIO_43 */
- "[BLSP2_UART_RFR_N]", /* GPIO_44 */
- "[BLSP3_UART_TX]", /* GPIO_45 */
- "[BLSP3_UART_RX]", /* GPIO_46 */
- "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */
- "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */
- "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */
- "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */
- "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */
- "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */
- "[CODEC_INT1_N]", /* GPIO_53 */
- "[CODEC_INT2_N]", /* GPIO_54 */
- "[BLSP7_I2C_SDA]", /* GPIO_55 */
- "[BLSP7_I2C_SCL]", /* GPIO_56 */
- "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */
- "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */
- "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */
- "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */
- "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */
- "GPIO-E", /* GPIO_62, LSEC pin 27 */
- "TP87", /* GPIO_63 */
- "[CODEC_RST_N]", /* GPIO_64 */
- "[PCM1_CLK]", /* GPIO_65 */
- "[PCM1_SYNC]", /* GPIO_66 */
- "[PCM1_DIN]", /* GPIO_67 */
- "[PCM1_DOUT]", /* GPIO_68 */
- "AUDIO_REF_CLK", /* GPIO_69 */
- "SLIMBUS_CLK", /* GPIO_70 */
- "SLIMBUS_DATA0", /* GPIO_71 */
- "SLIMBUS_DATA1", /* GPIO_72 */
- "NC", /* GPIO_73 */
- "NC", /* GPIO_74 */
- "NC", /* GPIO_75 */
- "NC", /* GPIO_76 */
- "TP94", /* GPIO_77 */
- "NC", /* GPIO_78 */
- "TP95", /* GPIO_79 */
- "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */
- "TP88", /* GPIO_81 */
- "TP89", /* GPIO_82 */
- "TP90", /* GPIO_83 */
- "TP91", /* GPIO_84 */
- "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */
- "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */
- "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */
- "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */
- "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */
- "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */
- "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */
- "NC", /* GPIO_92 */
- "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */
- "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */
- "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */
- "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */
- "NC", /* GPIO_97 */
- "CAM1_STANDBY_N", /* GPIO_98 */
- "NC", /* GPIO_99 */
- "NC", /* GPIO_100 */
- "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */
- "BOOT_CONFIG1", /* GPIO_102 */
- "USB_HUB_RESET", /* GPIO_103 */
- "CAM1_RST_N", /* GPIO_104 */
- "NC", /* GPIO_105 */
- "NC", /* GPIO_106 */
- "NC", /* GPIO_107 */
- "NC", /* GPIO_108 */
- "NC", /* GPIO_109 */
- "NC", /* GPIO_110 */
- "NC", /* GPIO_111 */
- "NC", /* GPIO_112 */
- "PMI8994_BUA", /* GPIO_113 */
- "PCIE2_RST_N", /* GPIO_114 */
- "PCIE2_CLKREQ_N", /* GPIO_115 */
- "PCIE2_WAKE", /* GPIO_116 */
- "SSC_IRQ_0", /* GPIO_117 */
- "SSC_IRQ_1", /* GPIO_118 */
- "SSC_IRQ_2", /* GPIO_119 */
- "NC", /* GPIO_120 */
- "GPIO121", /* GPIO_121, S HSEC pin 2 */
- "NC", /* GPIO_122 */
- "SSC_IRQ_6", /* GPIO_123 */
- "SSC_IRQ_7", /* GPIO_124 */
- "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */
- "BOOT_CONFIG5", /* GPIO_126 */
- "NC", /* GPIO_127 */
- "NC", /* GPIO_128 */
- "BOOT_CONFIG7", /* GPIO_129 */
- "PCIE1_RST_N", /* GPIO_130 */
- "PCIE1_CLKREQ_N", /* GPIO_131 */
- "PCIE1_WAKE", /* GPIO_132 */
- "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */
- "NC", /* GPIO_134 */
- "NC", /* GPIO_135 */
- "BOOT_CONFIG8", /* GPIO_136 */
- "NC", /* GPIO_137 */
- "NC", /* GPIO_138 */
- "GPS_SSBI2", /* GPIO_139 */
- "GPS_SSBI1", /* GPIO_140 */
- "NC", /* GPIO_141 */
- "NC", /* GPIO_142 */
- "NC", /* GPIO_143 */
- "BOOT_CONFIG6", /* GPIO_144 */
- "NC", /* GPIO_145 */
- "NC", /* GPIO_146 */
- "NC", /* GPIO_147 */
- "NC", /* GPIO_148 */
- "NC"; /* GPIO_149 */
-
- sdc2_cd_on: sdc2_cd_on {
- mux {
- pins = "gpio38";
- function = "gpio";
- };
-
- config {
- pins = "gpio38";
- bias-pull-up; /* pull up */
- drive-strength = <16>; /* 16 MA */
- };
- };
-
- sdc2_cd_off: sdc2_cd_off {
- mux {
- pins = "gpio38";
- function = "gpio";
- };
-
- config {
- pins = "gpio38";
- bias-pull-up; /* pull up */
- drive-strength = <2>; /* 2 MA */
- };
- };
-
- blsp1_uart1_default: blsp1_uart1_default {
- mux {
- pins = "gpio41", "gpio42", "gpio43", "gpio44";
- function = "blsp_uart2";
- };
-
- config {
- pins = "gpio41", "gpio42", "gpio43", "gpio44";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- blsp1_uart1_sleep: blsp1_uart1_sleep {
- mux {
- pins = "gpio41", "gpio42", "gpio43", "gpio44";
- function = "gpio";
- };
-
- config {
- pins = "gpio41", "gpio42", "gpio43", "gpio44";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- hdmi_hpd_active: hdmi_hpd_active {
- mux {
- pins = "gpio34";
- function = "hdmi_hot";
- };
-
- config {
- pins = "gpio34";
- bias-pull-down;
- drive-strength = <16>;
- };
- };
-
- hdmi_hpd_suspend: hdmi_hpd_suspend {
- mux {
- pins = "gpio34";
- function = "hdmi_hot";
- };
-
- config {
- pins = "gpio34";
- bias-pull-down;
- drive-strength = <2>;
- };
- };
-
- hdmi_ddc_active: hdmi_ddc_active {
- mux {
- pins = "gpio32", "gpio33";
- function = "hdmi_ddc";
- };
-
- config {
- pins = "gpio32", "gpio33";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- hdmi_ddc_suspend: hdmi_ddc_suspend {
- mux {
- pins = "gpio32", "gpio33";
- function = "hdmi_ddc";
- };
-
- config {
- pins = "gpio32", "gpio33";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-};
-
-&pcie0 {
- status = "okay";
- perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
- vddpe-3v3-supply = <&wlan_en>;
- vdda-supply = <&vreg_l28a_0p925>;
-};
-
-&pcie1 {
- status = "okay";
- perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
- vdda-supply = <&vreg_l28a_0p925>;
-};
-
-&pcie2 {
- status = "okay";
- perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
- vdda-supply = <&vreg_l28a_0p925>;
-};
-
-&pcie_phy {
- status = "okay";
-
- vdda-phy-supply = <&vreg_l28a_0p925>;
- vdda-pll-supply = <&vreg_l12a_1p8>;
-};
-
-&pm8994_gpios {
- gpio-line-names =
- "NC",
- "KEY_VOLP_N",
- "NC",
- "BL1_PWM",
- "GPIO-F", /* BL0_PWM, LSEC pin 28 */
- "BL1_EN",
- "NC",
- "WLAN_EN",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "DIVCLK1",
- "DIVCLK2",
- "DIVCLK3",
- "DIVCLK4",
- "BT_EN",
- "PMIC_SLB",
- "PMIC_BUA",
- "USB_VBUS_DET";
-
- pinctrl-names = "default";
- pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>;
-
- ls_exp_gpio_f: pm8994_gpio5 {
- pinconf {
- pins = "gpio5";
- output-low;
- power-source = <2>; // PM8994_GPIO_S4, 1.8V
- };
- };
-
- bt_en_gpios: bt_en_gpios {
- pinconf {
- pins = "gpio19";
- function = PMIC_GPIO_FUNC_NORMAL;
- output-low;
- power-source = <PM8994_GPIO_S4>; // 1.8V
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
- bias-pull-down;
- };
- };
-
- wlan_en_gpios: wlan_en_gpios {
- pinconf {
- pins = "gpio8";
- function = PMIC_GPIO_FUNC_NORMAL;
- output-low;
- power-source = <PM8994_GPIO_S4>; // 1.8V
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
- bias-pull-down;
- };
- };
-
- audio_mclk: clk_div1 {
- pinconf {
- pins = "gpio15";
- function = "func1";
- power-source = <PM8994_GPIO_S4>; // 1.8V
- };
- };
-
- volume_up_gpio: pm8996_gpio2 {
- pinconf {
- pins = "gpio2";
- function = "normal";
- input-enable;
- drive-push-pull;
- bias-pull-up;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
- power-source = <PM8994_GPIO_S4>; // 1.8V
- };
- };
-
- divclk4_pin_a: divclk4 {
- pinconf {
- pins = "gpio18";
- function = PMIC_GPIO_FUNC_FUNC2;
-
- bias-disable;
- power-source = <PM8994_GPIO_S4>;
- };
- };
-
- usb3_vbus_det_gpio: pm8996_gpio22 {
- pinconf {
- pins = "gpio22";
- function = PMIC_GPIO_FUNC_NORMAL;
- input-enable;
- bias-pull-down;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
- power-source = <PM8994_GPIO_S4>; // 1.8V
- };
- };
-};
-
-&pm8994_mpps {
- gpio-line-names =
- "VDDPX_BIAS",
- "WIFI_LED",
- "NC",
- "BT_LED",
- "PM_MPP05",
- "PM_MPP06",
- "PM_MPP07",
- "NC";
-};
-
-&pm8994_spmi_regulators {
- qcom,saw-reg = <&saw3>;
- s9 {
- qcom,saw-slave;
- };
- s10 {
- qcom,saw-slave;
- };
- s11 {
- qcom,saw-leader;
- regulator-always-on;
- regulator-min-microvolt = <980000>;
- regulator-max-microvolt = <980000>;
- };
-};
-
-&pmi8994_gpios {
- gpio-line-names =
- "NC",
- "SPKR_AMP_EN1",
- "SPKR_AMP_EN2",
- "TP61",
- "NC",
- "USB2_VBUS_DET",
- "NC",
- "NC",
- "NC",
- "NC";
-
- usb2_vbus_det_gpio: pmi8996_gpio6 {
- pinconf {
- pins = "gpio6";
- function = PMIC_GPIO_FUNC_NORMAL;
- input-enable;
- bias-pull-down;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
- power-source = <PM8994_GPIO_S4>; // 1.8V
- };
- };
-};
-
-&pmi8994_spmi_regulators {
- vdd_gfx: s2@1700 {
- reg = <0x1700 0x100>;
- regulator-name = "VDD_GFX";
- regulator-min-microvolt = <980000>;
- regulator-max-microvolt = <980000>;
- };
-};
-
-&rpm_requests {
- pm8994-regulators {
- compatible = "qcom,rpm-pm8994-regulators";
-
- vdd_s1-supply = <&vph_pwr>;
- vdd_s2-supply = <&vph_pwr>;
- vdd_s3-supply = <&vph_pwr>;
- vdd_s4-supply = <&vph_pwr>;
- vdd_s5-supply = <&vph_pwr>;
- vdd_s6-supply = <&vph_pwr>;
- vdd_s7-supply = <&vph_pwr>;
- vdd_s8-supply = <&vph_pwr>;
- vdd_s9-supply = <&vph_pwr>;
- vdd_s10-supply = <&vph_pwr>;
- vdd_s11-supply = <&vph_pwr>;
- vdd_s12-supply = <&vph_pwr>;
- vdd_l1-supply = <&vreg_s1b_1p025>;
- vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
- vdd_l3_l11-supply = <&vreg_s3a_1p3>;
- vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
- vdd_l5_l7-supply = <&vreg_s5a_2p15>;
- vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
- vdd_l8_l16_l30-supply = <&vph_pwr>;
- vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>;
- vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>;
- vdd_l14_l15-supply = <&vreg_s5a_2p15>;
- vdd_l17_l29-supply = <&vph_pwr_bbyp>;
- vdd_l20_l21-supply = <&vph_pwr_bbyp>;
- vdd_l25-supply = <&vreg_s3a_1p3>;
- vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
-
- vreg_s3a_1p3: s3 {
- regulator-name = "vreg_s3a_1p3";
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- };
-
- /**
- * 1.8v required on LS expansion
- * for mezzanine boards
- */
- vreg_s4a_1p8: s4 {
- regulator-name = "vreg_s4a_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
- vreg_s5a_2p15: s5 {
- regulator-name = "vreg_s5a_2p15";
- regulator-min-microvolt = <2150000>;
- regulator-max-microvolt = <2150000>;
- };
- vreg_s7a_1p0: s7 {
- regulator-name = "vreg_s7a_1p0";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <800000>;
- };
-
- vreg_l1a_1p0: l1 {
- regulator-name = "vreg_l1a_1p0";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
- vreg_l2a_1p25: l2 {
- regulator-name = "vreg_l2a_1p25";
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <1250000>;
- };
- vreg_l3a_0p875: l3 {
- regulator-name = "vreg_l3a_0p875";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <850000>;
- };
- vreg_l4a_1p225: l4 {
- regulator-name = "vreg_l4a_1p225";
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
- vreg_l6a_1p2: l6 {
- regulator-name = "vreg_l6a_1p2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
- vreg_l8a_1p8: l8 {
- regulator-name = "vreg_l8a_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- vreg_l9a_1p8: l9 {
- regulator-name = "vreg_l9a_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- vreg_l10a_1p8: l10 {
- regulator-name = "vreg_l10a_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- vreg_l11a_1p15: l11 {
- regulator-name = "vreg_l11a_1p15";
- regulator-min-microvolt = <1150000>;
- regulator-max-microvolt = <1150000>;
- };
- vreg_l12a_1p8: l12 {
- regulator-name = "vreg_l12a_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- vreg_l13a_2p95: l13 {
- regulator-name = "vreg_l13a_2p95";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
- vreg_l14a_1p8: l14 {
- regulator-name = "vreg_l14a_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- vreg_l15a_1p8: l15 {
- regulator-name = "vreg_l15a_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- vreg_l16a_2p7: l16 {
- regulator-name = "vreg_l16a_2p7";
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
- vreg_l17a_2p8: l17 {
- regulator-name = "vreg_l17a_2p8";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- };
- vreg_l18a_2p85: l18 {
- regulator-name = "vreg_l18a_2p85";
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2900000>;
- };
- vreg_l19a_2p8: l19 {
- regulator-name = "vreg_l19a_2p8";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
- vreg_l20a_2p95: l20 {
- regulator-name = "vreg_l20a_2p95";
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
- regulator-allow-set-load;
- };
- vreg_l21a_2p95: l21 {
- regulator-name = "vreg_l21a_2p95";
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
- regulator-allow-set-load;
- regulator-system-load = <200000>;
- };
- vreg_l22a_3p0: l22 {
- regulator-name = "vreg_l22a_3p0";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
- vreg_l23a_2p8: l23 {
- regulator-name = "vreg_l23a_2p8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
- vreg_l24a_3p075: l24 {
- regulator-name = "vreg_l24a_3p075";
- regulator-min-microvolt = <3075000>;
- regulator-max-microvolt = <3075000>;
- };
- vreg_l25a_1p2: l25 {
- regulator-name = "vreg_l25a_1p2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-allow-set-load;
- };
- vreg_l26a_0p8: l27 {
- regulator-name = "vreg_l26a_0p8";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
- vreg_l28a_0p925: l28 {
- regulator-name = "vreg_l28a_0p925";
- regulator-min-microvolt = <925000>;
- regulator-max-microvolt = <925000>;
- regulator-allow-set-load;
- };
- vreg_l29a_2p8: l29 {
- regulator-name = "vreg_l29a_2p8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
- vreg_l30a_1p8: l30 {
- regulator-name = "vreg_l30a_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
- vreg_l32a_1p8: l32 {
- regulator-name = "vreg_l32a_1p8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- vreg_lvs1a_1p8: lvs1 {
- regulator-name = "vreg_lvs1a_1p8";
- };
-
- vreg_lvs2a_1p8: lvs2 {
- regulator-name = "vreg_lvs2a_1p8";
- };
- };
-
- pmi8994-regulators {
- compatible = "qcom,rpm-pmi8994-regulators";
-
- vdd_s1-supply = <&vph_pwr>;
- vdd_s2-supply = <&vph_pwr>;
- vdd_s3-supply = <&vph_pwr>;
- vdd_bst_byp-supply = <&vph_pwr>;
-
- vph_pwr_bbyp: boost-bypass {
- regulator-name = "vph_pwr_bbyp";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vreg_s1b_1p025: s1 {
- regulator-name = "vreg_s1b_1p025";
- regulator-min-microvolt = <1025000>;
- regulator-max-microvolt = <1025000>;
- };
- };
-};
-
-&sdhc2 {
- /* External SD card */
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
- cd-gpios = <&msmgpio 38 0x1>;
- vmmc-supply = <&vreg_l21a_2p95>;
- vqmmc-supply = <&vreg_l13a_2p95>;
- status = "okay";
-};
-
-&q6asmdai {
- dai@0 {
- reg = <0>;
- };
-
- dai@1 {
- reg = <1>;
- };
-
- dai@2 {
- reg = <2>;
- };
-};
-
-&sound {
- compatible = "qcom,apq8096-sndcard";
- model = "DB820c";
- audio-routing = "RX_BIAS", "MCLK",
- "MM_DL1", "MultiMedia1 Playback",
- "MM_DL2", "MultiMedia2 Playback",
- "MultiMedia3 Capture", "MM_UL3";
-
- mm1-dai-link {
- link-name = "MultiMedia1";
- cpu {
- sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
- };
- };
-
- mm2-dai-link {
- link-name = "MultiMedia2";
- cpu {
- sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
- };
- };
-
- mm3-dai-link {
- link-name = "MultiMedia3";
- cpu {
- sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
- };
- };
-
- hdmi-dai-link {
- link-name = "HDMI";
- cpu {
- sound-dai = <&q6afedai HDMI_RX>;
- };
-
- platform {
- sound-dai = <&q6routing>;
- };
-
- codec {
- sound-dai = <&hdmi 0>;
- };
- };
-
- slim-dai-link {
- link-name = "SLIM Playback";
- cpu {
- sound-dai = <&q6afedai SLIMBUS_6_RX>;
- };
-
- platform {
- sound-dai = <&q6routing>;
- };
-
- codec {
- sound-dai = <&wcd9335 6>;
- };
- };
-
- slimcap-dai-link {
- link-name = "SLIM Capture";
- cpu {
- sound-dai = <&q6afedai SLIMBUS_0_TX>;
- };
-
- platform {
- sound-dai = <&q6routing>;
- };
-
- codec {
- sound-dai = <&wcd9335 1>;
- };
- };
-};
-
-&spmi_bus {
- pmic@0 {
- pon@800 {
- resin {
- compatible = "qcom,pm8941-resin";
- interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
- linux,code = <KEY_VOLUMEDOWN>;
- };
- };
- };
-};
-
-&ufsphy {
- status = "okay";
-
- vdda-phy-supply = <&vreg_l28a_0p925>;
- vdda-pll-supply = <&vreg_l12a_1p8>;
- vddp-ref-clk-supply = <&vreg_l25a_1p2>;
-};
-
-&ufshc {
- status = "okay";
-
- vcc-supply = <&vreg_l20a_2p95>;
- vccq-supply = <&vreg_l25a_1p2>;
- vccq2-supply = <&vreg_s4a_1p8>;
-
- vcc-max-microamp = <600000>;
- vccq-max-microamp = <450000>;
- vccq2-max-microamp = <450000>;
-};
-
-&usb2 {
- status = "okay";
- extcon = <&usb2_id>;
-
- dwc3@7600000 {
- extcon = <&usb2_id>;
- dr_mode = "otg";
- maximum-speed = "high-speed";
- };
-};
-
-&usb3 {
- status = "okay";
- extcon = <&usb3_id>;
-
- dwc3@6a00000 {
- extcon = <&usb3_id>;
- dr_mode = "otg";
- };
-};
-
-&usb3phy {
- status = "okay";
-
- vdda-phy-supply = <&vreg_l28a_0p925>;
- vdda-pll-supply = <&vreg_l12a_1p8>;
-
-};
-
-&wcd9335 {
- clock-names = "mclk", "slimbus";
- clocks = <&div1_mclk>,
- <&rpmcc RPM_SMD_BB_CLK1>;
-
- vdd-buck-supply = <&vreg_s4a_1p8>;
- vdd-buck-sido-supply = <&vreg_s4a_1p8>;
- vdd-tx-supply = <&vreg_s4a_1p8>;
- vdd-rx-supply = <&vreg_s4a_1p8>;
- vdd-io-supply = <&vreg_s4a_1p8>;
-};
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-20 03:30:50 +0000