diff options
Diffstat (limited to 'dts/src/arm64/qcom/ipq6018.dtsi')
| -rw-r--r-- | dts/src/arm64/qcom/ipq6018.dtsi | 157 |
1 files changed, 152 insertions, 5 deletions
diff --git a/dts/src/arm64/qcom/ipq6018.dtsi b/dts/src/arm64/qcom/ipq6018.dtsi index 9fa5b028e4..d2fe58e0eb 100644 --- a/dts/src/arm64/qcom/ipq6018.dtsi +++ b/dts/src/arm64/qcom/ipq6018.dtsi @@ -151,7 +151,7 @@ #size-cells = <2>; ranges; - rpm_msg_ram: memory@0x60000 { + rpm_msg_ram: memory@60000 { reg = <0x0 0x60000 0x0 0x6000>; no-map; }; @@ -258,9 +258,9 @@ reg = <0x0 0x01905000 0x0 0x8000>; }; - tcsr_q6: syscon@1945000 { + tcsr: syscon@1937000 { compatible = "syscon"; - reg = <0x0 0x01945000 0x0 0xe000>; + reg = <0x0 0x01937000 0x0 0x21000>; }; blsp_dma: dma-controller@7884000 { @@ -384,6 +384,105 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; + pcie_phy: phy@84000 { + compatible = "qcom,ipq6018-qmp-pcie-phy"; + reg = <0x0 0x84000 0x0 0x1bc>; /* Serdes PLL */ + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_PCIE0_AUX_CLK>, + <&gcc GCC_PCIE0_AHB_CLK>; + clock-names = "aux", "cfg_ahb"; + + resets = <&gcc GCC_PCIE0_PHY_BCR>, + <&gcc GCC_PCIE0PHY_PHY_BCR>; + reset-names = "phy", + "common"; + + pcie_phy0: lane@84200 { + reg = <0x0 0x84200 0x0 0x16c>, /* Serdes Tx */ + <0x0 0x84400 0x0 0x200>, /* Serdes Rx */ + <0x0 0x84800 0x0 0x4f4>; /* PCS: Lane0, COM, PCIE */ + #phy-cells = <0>; + + clocks = <&gcc GCC_PCIE0_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "gcc_pcie0_pipe_clk_src"; + #clock-cells = <0>; + }; + }; + + pcie0: pci@20000000 { + compatible = "qcom,pcie-ipq6018"; + reg = <0x0 0x20000000 0x0 0xf1d>, + <0x0 0x20000f20 0x0 0xa8>, + <0x0 0x20001000 0x0 0x1000>, + <0x0 0x80000 0x0 0x4000>, + <0x0 0x20100000 0x0 0x1000>; + reg-names = "dbi", "elbi", "atu", "parf", "config"; + + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + phys = <&pcie_phy0>; + phy-names = "pciephy"; + + ranges = <0x81000000 0 0x20200000 0 0x20200000 + 0 0x10000>, /* downstream I/O */ + <0x82000000 0 0x20220000 0 0x20220000 + 0 0xfde0000>; /* non-prefetchable memory */ + + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 75 + IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 78 + IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 79 + IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 83 + IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, + <&gcc GCC_PCIE0_AXI_M_CLK>, + <&gcc GCC_PCIE0_AXI_S_CLK>, + <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>, + <&gcc PCIE0_RCHNG_CLK>; + clock-names = "iface", + "axi_m", + "axi_s", + "axi_bridge", + "rchng"; + + resets = <&gcc GCC_PCIE0_PIPE_ARES>, + <&gcc GCC_PCIE0_SLEEP_ARES>, + <&gcc GCC_PCIE0_CORE_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_MASTER_ARES>, + <&gcc GCC_PCIE0_AXI_SLAVE_ARES>, + <&gcc GCC_PCIE0_AHB_ARES>, + <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>; + reset-names = "pipe", + "sleep", + "sticky", + "axi_m", + "axi_s", + "ahb", + "axi_m_sticky", + "axi_s_sticky"; + + status = "disabled"; + }; + watchdog@b017000 { compatible = "qcom,kpss-wdt"; interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; @@ -477,7 +576,7 @@ }; q6v5_wcss: remoteproc@cd00000 { - compatible = "qcom,ipq8074-wcss-pil"; + compatible = "qcom,ipq6018-wcss-pil"; reg = <0x0 0x0cd00000 0x0 0x4040>, <0x0 0x004ab000 0x0 0x20>; reg-names = "qdsp6", @@ -504,7 +603,7 @@ clocks = <&gcc GCC_PRNG_AHB_CLK>; clock-names = "prng"; - qcom,halt-regs = <&tcsr_q6 0xa000 0xd000 0x0>; + qcom,halt-regs = <&tcsr 0x18000 0x1b000 0xe000>; qcom,smem-states = <&wcss_smp2p_out 0>, <&wcss_smp2p_out 1>; @@ -524,6 +623,54 @@ }; }; + qusb_phy_1: qusb@59000 { + compatible = "qcom,ipq6018-qusb2-phy"; + reg = <0x0 0x059000 0x0 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, + <&xo>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2_1_PHY_BCR>; + status = "disabled"; + }; + + usb2: usb2@7000000 { + compatible = "qcom,ipq6018-dwc3", "qcom,dwc3"; + reg = <0x0 0x070F8800 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_USB1_MASTER_CLK>, + <&gcc GCC_USB1_SLEEP_CLK>, + <&gcc GCC_USB1_MOCK_UTMI_CLK>; + clock-names = "master", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB1_MASTER_CLK>, + <&gcc GCC_USB1_MOCK_UTMI_CLK>; + assigned-clock-rates = <133330000>, + <24000000>; + resets = <&gcc GCC_USB1_BCR>; + status = "disabled"; + + dwc_1: usb@7000000 { + compatible = "snps,dwc3"; + reg = <0x0 0x7000000 0x0 0xcd00>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + phys = <&qusb_phy_1>; + phy-names = "usb2-phy"; + tx-fifo-resize; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + dr_mode = "host"; + }; + }; + }; wcss: wcss-smp2p { |